Drive shafts for Peugeot 5008

Find the correct drive shaft for your Peugeot 5008 by filtering by model variant and technical specifications. Our range includes components tailored to both petrol and diesel engines...

Products for Drive shafts for Peugeot 5008

29 products
1 - 24 of 29
Item no.:1141175
  • Position: Front left
  • Total length: 662 mm
  • Splines gearbox side: 37
  • Splines wheel side: 28
Item no.:2160008
  • Position: Front right
  • Total length: 935 mm
  • Splines gearbox side: 37
  • Splines wheel side: 28
Item no.:1122294
  • Position: Front left
  • Total length: 696 mm
  • Splines gearbox side: 24
  • Splines wheel side: 28
Item no.:2118638
  • Position: Front right
  • Total length: 936 mm
  • Splines gearbox side: 24
  • Splines wheel side: 28
Item no.:1158971
  • Position: Front left
  • Total length: 688 mm
  • Splines gearbox side: 24
  • Splines wheel side: 28
Item no.:2151094
  • Position: Front right
  • Total length: 950 mm
  • Splines gearbox side: 24
  • Splines wheel side: 28
Item no.:1141204
  • Position: Front left
  • Total length: 626 mm
  • Splines gearbox side: 24
  • Splines wheel side: 25
Item no.:2148646
  • Position: Front right
  • Total length: 940 mm
  • Splines gearbox side: 24
  • Splines wheel side: 25
Item no.:2177899
  • Position: Front right
  • Total length: 945 mm
  • Splines gearbox side: 37
  • Splines wheel side: 28
Item no.:218037
  • Position: Front right
  • Joint diameter: 86 mm
  • Total length: 940 mm
  • Splines gearbox side: 37
  • Splines wheel side: 25
Item no.:2136058
  • Position: Front right
  • Total length: 880 mm
  • Splines gearbox side: 24
  • Splines wheel side: 25
Item no.:1111108
  • Position: Front left
  • Total length: 598 mm
  • Splines gearbox side: 37
  • Splines wheel side: 25
Item no.:1190389
  • Position: Front left
  • Total length: 683 mm
  • Splines gearbox side: 37
  • Splines wheel side: 28
Item no.:0187030
  • Total length: 686 mm
  • Splines gearbox side: 37
  • Splines wheel side: 28
Item no.:1102256
  • Position: Front left
  • Total length: 625 mm
  • Splines gearbox side: 37
  • Splines wheel side: 25
Item no.:2122685
  • Position: Front right
  • Total length: 970 mm
  • Splines gearbox side: 37
  • Splines wheel side: 25
Item no.:1183432
  • Position: Front left
  • Total length: 640 mm
  • Splines gearbox side: 37
  • Splines wheel side: 25
Item no.:2116413
  • Position: Front right
  • Total length: 935 mm
  • Splines gearbox side: 37
  • Splines wheel side: 25
Item no.:2186993
  • Position: Front right
  • Total length: 951 mm
  • Splines gearbox side: 37
  • Splines wheel side: 28
Item no.:1150745
  • Position: Front left
  • Total length: 622 mm
  • Splines gearbox side: 37
  • Splines wheel side: 28
Item no.:2153981
  • Position: Front right
  • Total length: 935 mm
  • Splines gearbox side: 24
  • Splines wheel side: 25
Item no.:216218
  • Position: Front right
  • Total length: 953 mm
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • ABS teeth: 0
Item no.:215874
  • ABS teeth: 0
Item no.:213579
  • Total length: 970 mm
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • ABS teeth: 0
Showing 1–24 of 29 products

Drive shafts for Peugeot 5008

The Peugeot 5008 places high demands on its drivetrain, especially as it is a vehicle often used for family transport and carrying heavy loads. A fully functioning drive shaft is crucial for transferring power from the engine to the wheels smoothly and quietly. Here at CVJoint24, you will find a carefully selected range of drive shafts that meet or exceed original equipment specifications for this model. With 21 available options, we cover most variants of this popular vehicle, whether early MPV versions or later SUV models. Choosing a quality component is an investment in your car's longevity and your own safety on the road.

What does a drive shaft do on a Peugeot 5008?

The drive shaft on a Peugeot 5008 is a vital component of the vehicle's drivetrain. Its main task is to transmit torque from the gearbox to the front wheels while accommodating suspension travel and steering angles. Because the 5008 is front-wheel drive, the drive shafts are subjected to considerable loads during acceleration and cornering. A well-functioning driveshaft ensures smooth power delivery and minimises the risk of mechanical failures that could leave you stranded. It consists of the shaft bar itself along with inner and outer CV joints, protected by CV boots packed with specialised grease to reduce friction and wear during operation.

Common signs of wear

There are several clear symptoms indicating that a drive shaft on your Peugeot 5008 is starting to fail. One of the most common signs is vibrations felt through the steering wheel or bodywork, especially under brisk acceleration. If you hear a rhythmic clicking noise at low speeds on full steering lock, the outer CV joint is often worn. It is also vital to inspect the CV boots regularly; if they split, grease leaks out and dirt enters, rapidly destroying the shaft's internal components. Spotting grease flung across the inside of the wheel rim or wheel arch is a critical warning that a boot has torn and the driveshaft requires immediate attention.

How to choose the correct drive shaft

Selecting the correct drive shaft requires precision, as specifications vary significantly across model variations. The Peugeot 5008 comes with different engine configurations, both petrol and diesel, as well as manual and automatic gearboxes, all of which directly influence shaft length and spline counts. By selecting your car's make, model and engine, you can easily filter out the parts that are technically compatible with your exact vehicle. Always verify whether it is the right-hand or left-hand side that needs replacing, as these typically differ in length due to the gearbox position in the engine bay. Our database helps you navigate smoothly among the 21 available options to guarantee a perfect fit.

Related parts to check

Be sure to check these exact pages for the same vehicle when working on the drive shaft:

When one drivetrain component shows signs of wear, nearby parts on the same car often warrant inspection too. By comparing these exact pages for the Peugeot 5008, it becomes much easier to determine whether the issue lies with the drive shaft itself or another related part of the drivetrain.

This is particularly relevant on models where vibrations, play and noises can transfer between different parts within the same drivetrain. A quick check of related categories reduces the risk of replacing the intended part while overlooking an adjacent component that contributes to the very same problem.

Fixing related issues whilst the drive shaft is removed saves both time and money in the long run, as labour costs frequently make up the largest expense during these repairs.

Why shop at CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, supplying high-quality drivetrain and power-transmission components across Europe. We combine technical expertise with a comprehensive product range to provide the best possible solutions for your Peugeot 5008. Our focus centres on precise fitment and premium build quality, giving you complete confidence in your purchase. With our extensive catalogue search by make, model and engine, we take the guesswork out of buying car parts. We understand the importance of receiving the correct spare parts promptly, and as specialists we provide dedicated technical support and product knowledge that general car parts stores rarely match. Trust a genuine specialist for your vehicle's drivetrain to get the job done right.

Frequently asked questions about drive shafts for Peugeot 5008 – Find the right part for your model

How do I know whether the right or left drive shaft is damaged on my Peugeot 5008?

Vibrations during acceleration can point to problems on either side, but clicking noises when turning in a specific direction usually indicate that the outer joint on the opposite side is worn. A physical inspection of the CV boots is the most reliable way to identify the damage.

Can I replace just the CV joint instead of the entire drive shaft?

Yes, if the shaft bar itself is straight and undamaged, you can often replace just the inner or outer CV joint. We supply both complete drive shafts and individual CV joints for the Peugeot 5008.

Does the same drive shaft fit all engine options of the Peugeot 5008?

No, drive shafts differ depending on whether the car has a petrol or diesel engine, as well as whether it is fitted with a manual or automatic gearbox. Always select your make, model and engine to find the correct specification.

What happens if I continue driving with a damaged drive shaft?

A worn drive shaft can eventually fail completely, causing the car to lose drive and leave you stranded. In the worst case, a broken shaft can cause consequential damage to the gearbox or suspension.

Is it difficult to replace a drive shaft yourself on a Peugeot 5008?

It requires sound mechanical knowledge, the right tools, and access to a car lift or axle stands. The job involves removing the wheel, brakes, and parts of the suspension.

Why is it important to check the ABS ring when replacing a drive shaft?

Many drive shafts for the Peugeot 5008 have the ABS ring mounted directly on the outer joint. If the ring is damaged or has the incorrect tooth count, the ABS and stability control systems will trigger a fault warning.