Drive shafts for Rover 600

Searching for a new drive shaft for your Rover 600? As an international driveline specialist, we supply a carefully chosen range of drive shafts tailored to your car. Selecting the...

Products for Drive shafts for Rover 600

30 products
1 - 24 of 30
Item no.:2121781
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 560 mm
  • ABS teeth: 50
Item no.:219247
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 560 mm
  • Joint diameter: 89 mm
Item no.:116508
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 602 mm
  • Joint diameter: 89 mm
Item no.:115977
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 602 mm
  • ABS teeth: 50
Item no.:1177170
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 600 mm
  • Joint diameter, gearbox side: 84,5 mm
Item no.:2105979
  • Position: Front right
  • Splines wheel side: 28
  • Total length: 558 mm
Item no.:1174339
  • Position: Front left
  • Splines wheel side: 28
  • Total length: 558 mm
Item no.:2120407
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 600 mm
  • Joint diameter, gearbox side: 84,5 mm
Item no.:1123275
  • Position: Front left
  • Splines wheel side: 28
  • Total length: 558 mm
  • ABS teeth: 50
Item no.:2187140
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 600 mm
  • ABS teeth: 50
Item no.:1161851
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 961 mm
  • Joint diameter, gearbox side: 84,5 mm
Item no.:2141471
  • Position: Front right
  • Splines wheel side: 28
  • Total length: 603 mm
Item no.:1112529
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 961 mm
  • ABS teeth: 50
Item no.:2192646
  • Position: Front right
  • Splines wheel side: 28
  • Total length: 603 mm
  • ABS teeth: 50
Item no.:313207
  • Position: Front
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 956 mm
  • Joint diameter: 92 mm
Item no.:2177444
  • Position: Front right
  • Splines gearbox side: 29
  • Splines wheel side: 28
  • Total length: 987 mm
  • Diameter 1: 89 mm
Item no.:2147943
  • Position: Front right
  • Splines gearbox side: 29
  • Splines wheel side: 28
  • Total length: 987 mm
  • ABS teeth: 50
Item no.:2105303
  • Position: Front right
  • Splines gearbox side: 29
  • Splines wheel side: 28
  • Total length: 987 mm
  • ABS teeth: 45
Item no.:1125966
  • Position: Front left
  • Splines gearbox side: 29
  • Splines wheel side: 28
  • Total length: 586 mm
  • Diameter 1: 89 mm
Item no.:1174859
  • Position: Front left
  • Splines gearbox side: 29
  • Splines wheel side: 28
  • Total length: 586 mm
  • ABS teeth: 50
Item no.:1152600
  • Position: Front left
  • Splines gearbox side: 29
  • Splines wheel side: 28
  • Total length: 586 mm
  • ABS teeth: 45
Item no.:0137978
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 959 mm
  • Diameter 1: 92 mm
  • ABS teeth: 50
Item no.:1103728
  • Position: Front left
  • Splines wheel side: 28
  • Total length: 587 mm
Item no.:2199068
  • Position: Front right
  • Splines wheel side: 28
  • Total length: 987 mm
Showing 1–24 of 30 products

Drive shafts for Rover 600

The Rover 600 is a model that blends British refinement with an engineered design requiring a precise fit when it comes to replacement car parts. Finding a high-quality drive shaft for Rover 600 is essential to preserve the car's original driving dynamics and ride comfort. As a Swedish driveline specialist, we have assembled a range tailored specifically to this model series. With carefully selected components, we cover most requirements, from the smaller petrol engines to the more powerful turbo variants. Every drive shaft in our inventory is manufactured to withstand the specific torque and loads that a Rover 600 encounters during daily driving. By investing in a tailored component, you ensure that power transfer remains seamless and wear on surrounding parts is kept to a minimum. We understand that Rover owners value quality, which is why we only supply parts proven to endure demanding European road conditions and temperature swings.

What does a drive shaft do on a Rover 600?

The drive shaft on a Rover 600 serves as the primary link between the vehicle's powertrain and the road surface. Its main job is to transfer the torque generated by the engine and transformed by the gearbox out to the front wheels. Because the Rover 600 is front-wheel drive, the driveshafts must not only spin at high speeds, but also operate at sharp angles whenever the driver steers. This is made possible by the inner and outer CV joints fitted at either end of the shaft. A drive shaft consists of a solid or hollow high-strength steel bar engineered to resist torsional stress. If the shaft bends or the joints develop play, precision in the power delivery is lost, leading to a degraded driving experience. For the Rover 600, renowned for its composed and comfortable ride, an intact drive shaft is crucial to keep the car feeling as balanced as the factory intended.

Common signs of wear

Identifying wear on a drive shaft early can save you from costly secondary damage. One of the most typical signs of a faulty drive shaft on a Rover 600 is a clicking or knocking sound clearly audible when driving at low speeds on full steering lock. This noise almost invariably stems from the outer CV joint, where the internal steel balls have begun striking against worn tracks. Another common symptom is vibration during acceleration, frequently between 40 and 80 km/h. Such vibrations often point to play in the inner CV joint closest to the gearbox, or an unbalanced shaft. You should also inspect the CV boots regularly. If a boot splits, the dedicated grease lubricating the joint is flung outward by centrifugal force, often visible as black grease splatters inside the wheel rim or wheel arch. Without lubrication and exposed to road dirt, a constant velocity joint will fail in very short order.

Choosing the right drive shaft

When purchasing a replacement drive shaft for your Rover 600, precision regarding the specifications is vital. Multiple shaft variants exist depending on the specific engine and gearbox configuration of your car. For example, overall shaft length and spline counts on the stub shafts can differ across engine types. Furthermore, it is critical whether your vehicle features anti-lock brakes (ABS), as the drive shaft must then be fitted with the correct ABS ring to keep the car's safety systems operational. To make the process straightforward and reliable, you can select your vehicle's exact make, model and engine variant in our store. This immediately filters the relevant products for your Rover 600, removing any guesswork and ensuring you receive a part with an accurate fit backed by our fitment guarantee.

Related parts to inspect

Be sure to check these related pages for the same vehicle when working on the drive shaft:

Whenever a drivetrain component shows signs of wear, neighbouring parts on the vehicle often warrant inspection too. By comparing these dedicated pages for Rover 600, it becomes much easier to determine whether an issue lies with the drive shaft itself or another nearby section of the drivetrain.

This is particularly valuable on models where vibrations, play and strange noises can blur the lines between multiple driveline parts. A quick check across related categories lowers the risk of replacing the correct component type while overlooking an adjacent worn part causing the very same symptoms.

Why buy from CVJoint24?

Ordering from CVJoint24 means partnering with a specialist in drivetrains and power transmission. As an international shop backed by Swedish driveline expertise, we take pride in offering premium spare parts engineered for precision fitment across European car parcs. For your Rover 600, this means access to extensive category depth and technical support that general retailers struggle to match. Our vehicle selector helps you pick the right component immediately, supported by our comprehensive fitment guarantee for total peace of mind. We know you need prompt replacements when a component fails, which is why we dispatch stocked items quickly from our Swedish central warehouse. By focusing exclusively on drivetrain parts, we deliver dependable quality and knowledgeable advice. With CVJoint24, you always receive the right part at a competitive price, backed by the expertise needed for a smooth repair.

Frequently Asked Questions about Drive Shafts for Rover 600

How do I know if the drive shaft fits my Rover 600?

The easiest and most reliable method is to select your Rover 600 make, model and engine variant. This filters our range of 15 items down to the ones that fit your car perfectly.

Can I replace just the CV joint instead of the entire shaft?

Yes, if the shaft bar itself is straight and undamaged, you can replace solely the inner or outer CV joint. We supply both complete shafts and individual joints.

What are the most common symptoms of a worn drive shaft?

The most common signs are clicking noises when turning, vibrations during acceleration, and grease leaking from split CV boots.

Is an ABS ring included on the drive shaft for Rover 600?

Many of our drive shafts for Rover 600 come with a pre-fitted ABS ring. Always check the product specifications to ensure that the tooth count matches your vehicle.

How quickly will my new drive shaft be delivered?

We offer prompt dispatch for items in stock, meaning you will usually receive your new drive shaft within just a few working days.

Why does my Rover 600 vibrate during acceleration?

Vibrations during acceleration are frequently caused by wear in the inner CV joint or an imbalance in the drive shaft itself. This is a clear sign that the component needs inspecting.