Drive shafts for Seat Leon SC

Looking for a high-quality drive shaft for your Seat Leon SC? As a Swedish driveline specialist shipping across Europe, we offer a carefully selected range of drive shafts engineered for...

Products for Drive shafts for Seat Leon SC

21 products
1 - 21 of 21
Item no.:1140494
  • Position: Front left
  • Flange diameter: 100 mm
  • Total length: 524 mm
  • Splines wheel side: 36
Item no.:2123828
  • Position: Front right
  • Flange diameter: 100 mm
  • Total length: 815 mm
  • Splines wheel side: 36
Item no.:1180915
  • Position: Front left
  • Flange diameter: 108 mm
  • Total length: 513 mm
  • Splines wheel side: 36
Item no.:2158801
  • Position: Front right
  • Flange diameter: 108 mm
  • Total length: 795 mm
  • Splines wheel side: 36
Item no.:317230
  • Position: Front left
  • Flange diameter: 119 mm
  • Total length: 470 mm
  • Splines wheel side: 36
  • ABS teeth: 0
Item no.:1124600
  • Position: Front left
  • Flange diameter: 108 mm
  • Total length: 488 mm
  • Splines wheel side: 36
Item no.:2198523
  • Position: Front right
  • Flange diameter: 108 mm
  • Total length: 600 mm
  • Splines wheel side: 36
Item no.:111110
  • Position: Front left
  • Flange diameter: 110 mm
  • Total length: 485 mm
  • Splines wheel side: 36
  • ABS teeth: 0
Item no.:214047
  • Position: Front right
  • Flange diameter: 119 mm
  • Total length: 760 mm
  • Splines wheel side: 36
Item no.:2100772
  • Position: Front right
  • Flange diameter: 110 mm
  • Total length: 767 mm
  • Splines wheel side: 36
  • ABS teeth: 0
Item no.:215817
  • Position: Front right
  • Flange diameter: 110 mm
  • Splines wheel side: 36
  • ABS teeth: 0
Item no.:316423
  • Total length: 758 mm
  • Splines wheel side: 36
  • ABS teeth: 0
Item no.:119449
  • Total length: 511 mm
  • Splines wheel side: 36
  • ABS teeth: 0
Item no.:1111625
  • Position: Front left
  • Flange diameter: 100 mm
  • Total length: 520 mm
  • Splines wheel side: 36
Item no.:2164609
  • Position: Front right
  • Flange diameter: 100 mm
  • Total length: 814 mm
  • Splines wheel side: 36
Item no.:1163757
  • Position: Front left
  • Flange diameter: 108 mm
  • Total length: 523 mm
  • Splines wheel side: 36
Item no.:215069
  • Total length: 792 mm
  • Splines wheel side: 36
Item no.:2165644
  • Position: Front right
  • Flange diameter: 108 mm
  • Total length: 601 mm
  • Splines wheel side: 36
Item no.:113705
  • Total length: 520 mm
  • Splines wheel side: 36
  • ABS teeth: 0
Item no.:2171475
  • Position: Front right
  • Flange diameter: 108 mm
  • Total length: 780 mm
  • Splines wheel side: 36
Item no.:1177160
  • Position: Front left
  • Flange diameter: 100 mm
  • Total length: 517 mm
  • Splines wheel side: 36

Drive shafts for Seat Leon SC

The Seat Leon SC (Sports Coupé) is renowned for its sporty character, short wheelbase, and dynamic handling. To preserve that precise road feel, your drivetrain must be in first-class condition. A drive shaft for Seat Leon SC is a critical component exposed to immense mechanical stress during every acceleration, braking manoeuvre, and turn. Here at CVJoint24, you will find a broad selection of 21 matching items covering most engine options and model years for this specific three-door version. We focus on supplying parts that meet or exceed original equipment specifications to guarantee longevity and optimal power delivery, whether you drive in city traffic or out on the motorway.

Our range is hand-picked to match the technical platform of the Leon SC, meaning every shaft is balanced and built to handle the torque generated by your engine. Choosing a model-specific component ensures that your car's road handling remains sharp and wear on surrounding driveline parts is kept to a minimum. As a Swedish driveline specialist, we understand the specific needs of Seat owners who demand both performance and reliability.

What does a drive shaft do on a Seat Leon SC?

The main task of the drive shaft on your Seat Leon SC is to transfer torque from the engine and gearbox directly to the road wheels. Because most Leon SC models are front-wheel drive, the drive shafts play an essential role in putting power to the road. The shaft is far from just a solid bar; it is an intricate mechanical assembly made up of a shaft bar fitted with an inner CV joint for Seat Leon SC at the gearbox end and an outer CV joint for Seat Leon SC at the wheel hub.

This design is necessary to allow the wheels to travel vertically with the suspension while enabling the outer constant velocity joints to pivot as you steer. For a Seat Leon SC, which frequently features firmer suspension and sharper steering, these joints must cope with wide operating angles without losing efficiency or generating vibrations. A sound driveshaft ensures seamless power delivery, which is vital both for safety and for the dynamic driving experience the car is built to provide.

Common signs of wear

Several clear warning signs show that a drive shaft on your Seat Leon SC is approaching the end of its service life. One of the most typical symptoms is a rhythmic clicking or knocking sound when turning sharply at low speeds, such as during parking. This noise almost always originates from a worn outer CV joint where the internal steel balls have worn grooves into the bearing tracks. If the sound disappears when driving in a straight line, it is a telltale sign that replacement is overdue.

Another common symptom is vibration felt through the steering wheel or floor pan during acceleration. This frequently points to wear in the inner CV joint or an unbalanced driveshaft. It is equally essential to inspect the CV boots regularly. If a rubber boot splits, road grit, water, and salt enter the joint while vital lubricating grease is flung out. Without immediate attention, the joint will fail rapidly from friction and corrosion. Catching these signs early protects you from costly secondary damage to your gearbox and suspension.

How to choose the correct drive shaft

Finding the correct drive shaft for your Seat Leon SC can seem tricky at first, as specifications differ according to engine size, gearbox type (manual or DSG), and whether the car has four-wheel drive. The shafts vary in total length, the spline count at either end, and whether an integrated ABS ring is fitted to the joint or wheel speed is monitored differently. For instance, a Seat Leon SC Cupra often requires heavier-duty dimensions than an entry-level 1.2 TSI.

The most dependable way to browse our range is to filter by your car's make, model, and engine. Selecting your exact vehicle configuration quickly reveals the 21 compatible parts. We always offer a correct-fit guarantee, giving you complete confidence that your ordered replacement will install without issue. Should you need any reassurance, our technical team is ready to help you identify the right component based on your vehicle's VIN or technical details.

Related parts to inspect

Be sure to review these relevant category pages for the same vehicle when working on your drive shaft:

When one driveline component starts to deteriorate, nearby parts on the same car often warrant attention as well. By checking these corresponding categories for the Seat Leon SC, you can easily determine whether an issue lies purely within the drive shaft or involves another section of the powertrain.

This is especially true on cars where vibrations, play, and strange noises can easily travel between multiple drivetrain components. Taking a quick look at related categories prevents the hassle of changing one part only to find an adjoining worn component was contributing to the same problem.

By inspecting these components proactively, you ensure your Seat Leon SC remains dependable and that your new drive shaft operates under ideal conditions without undue strain from adjacent worn parts.

Why buy from CVJoint24?

CVJoint24 is your dedicated partner for Seat driveline and transmission components. As an international shop backed by a Swedish driveline specialist, we combine comprehensive technical knowledge with an extensive warehouse inventory of specialised parts. We know that when a driveshaft fails, you need a replacement without delay to get back on the road, which is why we process orders promptly from our central warehouse.

Our commitment to quality means we only supply components we trust, and our correct-fit guarantee removes any uncertainty when ordering. Buying from us gives you more than just car parts—you gain access to years of dedicated driveline experience. We work hard to offer the right part at the right price, supported by customer service that understands the technical nuances of your vehicle's drivetrain. Trust the specialists to keep your Seat performing at its best.

Frequently asked questions about drive shafts for Seat Leon SC

How do I know if the drive shaft is failing on my Seat Leon SC?

The most common signs are clicking noises when making sharp turns (outer joint) or vibrations throughout the car during acceleration (inner joint). Also check whether the CV boots are split and leaking grease.

Can I replace just the CV joint, or do I need to replace the complete drive shaft?

On the Seat Leon SC, it is often possible to replace only the outer or inner CV joint if the shaft itself is undamaged. We supply both individual CV joints and complete drive shafts to suit your needs.

Does the same drive shaft fit all Seat Leon SC engine variants?

No, drive shafts differ depending on whether you have a TSI, TDI or Cupra engine, as well as whether the car has a manual gearbox or DSG. Always select your make, model and engine to find the correct part.

What is included when I buy a complete drive shaft from you?

Our complete drive shafts come fully assembled with both inner and outer CV joints, CV boots, grease, and the necessary fitting accessories such as nuts or bolts.

How long is the delivery time for a Seat Leon SC drive shaft?

We dispatch quickly from our central warehouse for in-stock items, which means you will typically receive your new drive shaft within a few working days across Europe.

Does your fitment guarantee apply when selecting my vehicle details?

Yes, our fitment guarantee means that if you choose your correct vehicle model and engine specification and order the recommended part, we guarantee it will fit your Seat Leon SC.