Drive shafts for Suzuki Baleno

When your Suzuki Baleno needs a new drive shaft, choosing a precision-fit component is essential to preserve your car's reliability and driving comfort. At CVJoint24, we are driveline...

Products for Drive shafts for Suzuki Baleno

32 products
1 - 24 of 32
Item no.:1100011
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 609 mm
  • Joint diameter: 76 mm
Item no.:1188583
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 609 mm
  • ABS teeth: 42
Item no.:2189928
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 884 mm
Item no.:2154768
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 884 mm
  • ABS teeth: 42
Item no.:2157764
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 611 mm
  • ABS teeth: 42
Item no.:2160283
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 611 mm
  • Joint diameter: 72 mm
Item no.:1109083
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 632 mm
  • ABS teeth: 42
Item no.:1179108
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 632 mm
Item no.:2119224
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 570 mm
  • Diameter 1: 69 mm
Item no.:1174636
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 580 mm
  • Joint diameter: 69 mm
Item no.:2176812
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 25
  • Total length: 566 mm
  • ABS teeth: 42
Item no.:1104174
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 25
  • Total length: 592 mm
  • ABS teeth: 42
Item no.:1155239
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 631 mm
  • ABS teeth: 42
Item no.:1111303
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 631 mm
Item no.:1128792
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 591 mm
Item no.:1158199
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 25
  • Total length: 595 mm
Item no.:2127843
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 25
  • Total length: 566 mm
Item no.:2101409
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 25
  • Total length: 570 mm
Item no.:1131909
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 591 mm
  • ABS teeth: 42
Item no.:2161344
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 615 mm
  • Diameter 1: 68 mm
Item no.:1187502
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 635 mm
  • Diameter 1: 68 mm
Item no.:2178303
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 925 mm
Item no.:116166
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 664 mm
Item no.:1155419
  • Position: Front left
  • Splines wheel side: 25
  • Joint diameter: 74 mm
Showing 1–24 of 32 products

Drive shafts for Suzuki Baleno

Maintaining the drivetrain on a Suzuki Baleno is an investment in both safety and longevity. The drive shaft is one of the most critical components in the car's power transmission, responsible for transferring torque from the gearbox directly to the wheels. For the Suzuki Baleno, a model renowned for its reliability, it is vital that replacement parts meet the same high standards as the original equipment. At CVJoint24, we have assembled an extensive selection to ensure you find exactly what you need for your vehicle.

Our range covers various generations and configurations of the Suzuki Baleno. Because drive shafts can vary depending on engine capacity, gearbox type and whether the car is equipped with an ABS system, precise selection is essential. As Swedish driveline specialists, we understand the technical nuances required for a drive shaft to perform reliably under challenging European road conditions, from freezing winters to demanding city driving. Choosing the correct part from the outset minimises the risk of future issues and unnecessary wear on other drivetrain components.

What does a drive shaft do on a Suzuki Baleno?

The drive shaft on a Suzuki Baleno acts as the final link in the chain that propels the car forward. It receives rotational force from the differential in the gearbox and delivers it to the front wheels. On a front-wheel-drive vehicle like the Baleno, the driveshaft must not only rotate at high speed, but also cope with wide steering angles and suspension movement when driving over bumps. This is made possible by the constant velocity joints, or CV joints, fitted at each end of the shaft.

Beyond pure power transfer, the drive shaft plays an essential role in vehicle stability. A well-balanced drive shaft reduces vibrations and ensures smooth, even power delivery for a comfortable ride. For the Suzuki Baleno, the design is optimised to be lightweight yet robust enough to handle the engine's torque. If the shaft becomes bent or the joints wear out, it compromises not only propulsion but also the car's handling and comfort. Understanding its function helps you spot when a replacement is due.

Common signs of wear

Several clear symptoms indicate that the drive shaft on your Suzuki Baleno is failing. One of the most common signs is a clicking or knocking noise heard when making sharp turns at low speeds. This sound usually originates from the outer CV joint and is caused by worn ball bearings or lack of lubrication. If you experience vibrations through the steering wheel or the car's chassis under acceleration, the inner CV joint or an unbalanced, damaged shaft itself is likely the cause.

Another critical indicator is grease leaking onto the inside of the wheel rim or around the wheel arch. This is almost always caused by a split CV boot. When the boot tears, dirt and moisture penetrate the joint whilst essential grease is thrown out, leading to rapid component failure. For Suzuki Baleno owners, regular inspection of these rubber boots is wise. If caught early, replacing the boot may suffice; however, once noises and vibrations have set in, replacing the entire drive shaft or CV joint is typically required to restore your vehicle to peak condition.

How to choose the correct drive shaft

Choosing the right Drive shafts for Suzuki requires checking your car's technical specifications. For the Suzuki Baleno, several driveshaft variants exist that may look identical at first glance but differ in critical dimensions. The key details to verify are total shaft length, the number of splines (teeth) at both ends, and whether the shaft is prepared with an ABS ring. Differences often exist between manual and automatic gearboxes, as well as across various engine variants.

To make the process as straightforward and reliable as possible, we recommend selecting your vehicle by make, model and engine. Filtering our catalogue ensures you see the components designed specifically for your car. This is the safest way to guarantee correct fitment and prevent ordering mistakes. Should you be unsure about any technical specification, such as the tooth count on an ABS ring, confirming these measurements beforehand ensures we supply the right part first time.

Related parts to inspect

We also recommend checking these specific pages for the same vehicle when working on the drive shaft:

When one drivetrain component shows signs of wear, nearby parts on the same vehicle should be inspected as well. By cross-referencing these specific pages for the Suzuki Baleno, it becomes easier to identify whether an issue lies with the drive shaft itself or another connected driveline component.

This is especially important on models where vibrations, play and strange noises can transfer across multiple parts in the drivetrain. A quick check of related categories reduces the risk of replacing one correct part whilst overlooking an adjacent worn component that causes the same symptom.

Carrying out a comprehensive check of the front suspension and driveline ensures your Suzuki Baleno remains dependable for miles to come. Renewing a cracked ABS ring or a perished boot at the same time as the drive shaft saves you both time and future garage bills.

Why buy from cvjoint24.com?

CVJoint24 is your dedicated specialist for drivetrain and power transmission components. Because we focus exclusively on this area, we offer in-depth technical expertise that general car parts stores often lack. We know how important it is to receive the correct part for your Suzuki Baleno on the first attempt, which is why we back our products with a dependable fitment guarantee. Our aim is to help you select the exact part with complete confidence that it meets high quality standards.

Shipping directly from our central warehouse in Helsingborg, Sweden, we supply customers efficiently right across the European Union, which is invaluable when your car is up on the ramp awaiting parts. We combine expert know-how with an easy-to-use catalogue where selecting your make, model and engine leads you straight to the right spare parts. Choosing CVJoint24 gives you direct access to Swedish driveline specialists committed to keeping your Suzuki Baleno driving smoothly. Correct parts, fast dispatch and technical reassurance are at the core of everything we do.

Frequently asked questions about drive shafts for Suzuki Baleno

How do I know which drive shaft fits my Suzuki Baleno?

The easiest and most reliable way is to select your vehicle's make, model and engine variant in our search filter. This filters our range of 32 items to show the precise parts matched to your specific engine and gearbox.

What are the most common symptoms of a failing drive shaft on a Baleno?

The most typical signs are clicking noises when cornering (outer CV joint), vibrations under acceleration (inner CV joint or imbalance), and visible grease leaks from split CV boots.

Do I have to replace both drive shafts at the same time?

No, there is no requirement to replace both sides simultaneously. However, they often wear at a similar rate, so it is wise to inspect the boots and joints on the opposite side while carrying out the repair.

Is an ABS ring included when I buy a complete drive shaft for Suzuki Baleno?

Many of our complete drive shafts come with a pre-fitted ABS ring, but this varies between items. Always check the product specifications for your selected model to see exactly what is included.

What is the difference between an inner and an outer CV joint?

The outer CV joint sits at the wheel hub and accommodates steering angles, whereas the inner CV joint connects to the gearbox and primarily manages suspension travel and drive shaft plunge.

How quickly can I get my new drive shaft delivered?

We dispatch quickly across Europe from our central warehouse in Helsingborg, Sweden, ensuring reliable and prompt delivery for orders placed on weekdays.

Do you offer a fitment guarantee on drive shafts for Suzuki?

Yes, we offer a fitment guarantee when you select your vehicle's exact make, model and engine. This ensures the spare part is guaranteed to fit your car correctly.