Drive shafts for Toyota RAV 4 V

Looking for a replacement drive shaft for your Toyota RAV 4 V? As Swedish driveline specialists, we supply a carefully chosen range of drive shafts tailored to meet your vehicle’s...

Products for Drive shafts for Toyota RAV 4 V

10 products
1 - 10 of 10
Item no.:1133722
  • Position: Front left
  • Total length: 679 mm
  • Splines gearbox side: 24
  • Splines wheel side: 30
Item no.:215913
  • Position: Front right
  • Total length: 978 mm
  • Splines gearbox side: 24
  • Splines wheel side: 30
Item no.:614386
  • Position: Rear
  • Total length: 863 mm
  • Splines gearbox side: 23
  • Splines wheel side: 26
  • ABS teeth: 0
Item no.:219735
  • Position: Front right
  • Total length: 991 mm
  • Splines gearbox side: 24
  • Splines wheel side: 30
  • ABS teeth: 0
Item no.:513482
  • Position: Rear right
  • Total length: 847 mm
  • Splines gearbox side: 23
  • Splines wheel side: 26
  • ABS teeth: 0
Item no.:416361
  • Position: Rear left
  • Total length: 790 mm
  • Splines gearbox side: 23
  • Splines wheel side: 26
  • ABS teeth: 0
Item no.:115072
  • Total length: 665 mm
  • Splines gearbox side: 24
  • Splines wheel side: 30
  • ABS teeth: 0
Item no.:412698
  • Total length: 777 mm
  • Splines gearbox side: 23
  • Splines wheel side: 26
  • ABS teeth: 0
Item no.:114761
  • Position: Front left
  • Total length: 660 mm
  • Splines gearbox side: 24
  • Splines wheel side: 26
Item no.:114480
  • Position: Front left
  • Total length: 677 mm
  • Splines gearbox side: 24
  • Splines wheel side: 30

Drive shaft for Toyota RAV 4 V

The Toyota RAV 4 V represents a modern generation of SUV engineering where power transmission plays a key role in both driving dynamics and fuel efficiency. A fully operational drive shaft is vital for maintaining your vehicle’s stability and performance, whether you drive a front-wheel-drive variant or a model equipped with the advanced AWD-i system. At CVJoint24, you will find model-tailored components specifically engineered to match the technical specifications of this generation. We understand the importance of precision when it comes to Toyota and their stringent demands for reliability.

What does the drive shaft do on a Toyota RAV 4 V?

The primary task of the drive shaft on a Toyota RAV 4 V is to transfer torque from the gearbox or electric motor directly to the road wheels. It accomplishes this via an intricate assembly that allows the wheels to travel up and down with the suspension while simultaneously steering. On the fifth-generation RAV 4, these components are engineered to withstand both urban commuting and light off-roading. A properly functioning drive shaft ensures smooth power delivery, minimising unnecessary wear on other drivetrain parts and optimising road holding in all driving conditions.

Common signs of wear

Several clear symptoms suggest that a driveshaft on your Toyota RAV 4 V is nearing the end of its service life. One of the most typical signs is a clicking or knocking noise on full steering lock, which usually indicates damage to the outer CV joint. Vibrations through the steering wheel or vehicle chassis under acceleration often point to wear in the inner CV joint. If you spot grease splattered on the inside of the wheel rim or around the wheel arch, a CV boot has split, quickly letting road grime in to ruin the joint’s internal components. Tackling these warning signs early saves money and maintains safety.

How to choose the correct drive shaft

Selecting the right replacement requires care, as specifications vary according to engine variant and drivetrain setup. To ensure a correct fit, always select your vehicle’s make, model and engine in our parts finder. It is essential to confirm whether you require the left-hand or right-hand side, as well as whether the shaft is for the front or rear axle on AWD versions. We have made it simple to find the correct parts via our Drive shafts for Toyota category. Here are the key steps for choosing the right component:

  • Select your car by make, model and engine to find the exact match.
  • Check the fitting position (left or right).
  • Confirm whether the vehicle has a manual or automatic gearbox.
  • Ensure the shaft matches your vehicle's specific drive layout (FWD or AWD).

Related components to check

Be sure to inspect these exact pages for the same vehicle when working on the drive shaft:

When a drivetrain part shows wear, neighbouring components often need checking as well. Comparing these exact pages for the Toyota RAV 4 V makes it much easier to determine whether an issue lies with the drive shaft itself or with an adjacent section of the drivetrain.

This is particularly important on modern SUVs where vibrations, play and unusual noises can travel between interconnected driveline assemblies. Checking related categories reduces the risk of replacing a single part while overlooking an adjacent component that causes the same symptom.

  • Toyota RAV 4 V

Why shop at cvjoint24.com?

CVJoint24 is the international shop of a Swedish driveline specialist, dispatching orders directly from our central warehouse in Helsingborg, Sweden across the EU. We combine in-depth technical expertise with a product range built to the highest standards, so you can maintain your Toyota RAV 4 V with complete confidence. Our precise fitment criteria eliminate guesswork, and our efficient European logistics ensure rapid delivery to your door. We focus on supplying the correct car parts first time so your vehicle gets back on the road without delay. Rely on our specialist knowledge and components engineered to endure.

Frequently asked questions about drive shafts for Toyota RAV 4 V

How do I know if the drive shaft on my Toyota RAV 4 V is faulty?

The most common signs are clicking noises when turning, vibrations under acceleration or visible grease leakage from a split CV boot. If you notice any driveline imbalance, you should inspect the drive shafts immediately.

Can I replace just the CV joint instead of the entire drive shaft?

Yes, in many cases it is possible to replace just the inner or outer CV joint. However, if the shaft itself is damaged or you want to save time on labour, a complete drive shaft is often the most cost-effective solution.

Does the same drive shaft fit all Toyota RAV 4 V models?

No, specifications differ depending on whether the car is front-wheel drive or AWD-i, as well as its engine variant and gearbox. Always select your exact make, model and engine to find the correct part.

What is included in your fitment guarantee?

Our fitment guarantee ensures that the part you order will fit your car provided you have selected your exact vehicle details. In the unlikely event that it does not fit, we will help you find the correct part.

How quickly will my new drive shaft be delivered?

We dispatch all in-stock items as quickly as possible. If you order in good time on a working day, your drive shaft is normally dispatched the same day from our warehouse.

Are your drive shafts OEM quality?

Yes, our drive shafts match or exceed original equipment standards, manufactured to withstand the toughest demands and harsh European weather conditions on your Toyota RAV 4 V.