Drive shafts for Volkswagen Beetle 1.4 TSI

Looking for a replacement Drive shafts for your Volkswagen Beetle 1.4 TSI? As drivetrain specialists, we offer precision-engineered components that ensure the power from your TSI engine...

Products for Drive shafts for Volkswagen Beetle 1.4 TSI

10 products
1 - 10 of 10
Item no.:1176564
  • Position: Front left
  • Flange diameter: 108 mm
  • Total length: 525 mm
  • Splines wheel side: 36
Item no.:117727
  • Position: Front left
  • Diameter: 83 mm
  • Flange diameter: 100 mm
  • Total length: 524 mm
  • ABS teeth: 0
Item no.:317854
  • Position: Front left
  • Flange diameter: 108 mm
  • Joint diameter: 108 mm
  • Total length: 495 mm
  • Splines wheel side: 36
Item no.:215196
  • Position: Front right
  • Flange diameter: 100 mm
  • Total length: 815 mm
  • Splines wheel side: 36
Item no.:2120204
  • Position: Front right
  • Flange diameter: 108 mm
  • Total length: 806 mm
  • Splines gearbox side: 108
  • ABS teeth: 0
Item no.:1146584
  • Splines wheel side: 36
Item no.:2161363
  • Total length: 812 mm
  • Splines wheel side: 36
Item no.:115557
  • Total length: 534 mm
  • Splines wheel side: 36
Item no.:213408
  • Total length: 792 mm
  • Splines wheel side: 36
  • ABS teeth: 0
Item no.:2174477
  • Inner splines: 30
  • Splines wheel side: 36

Drive shafts for Volkswagen Beetle 1.4 TSI

The Volkswagen Beetle 1.4 TSI is a car that combines iconic styling with modern German engineering. Maintaining its smooth driving dynamics requires a drivetrain in peak condition. The drive shaft is one of the most critical components in this system, responsible for transferring torque from the gearbox directly to the front wheels. Because the 1.4 TSI engine delivers lively torque, high demands are placed on the drive shaft to cope with the load reliably. With us, you will find drive shafts engineered specifically to meet or exceed original equipment specifications for your Beetle.

When choosing a spare part from our range, you can be confident that it is tailored to the technical requirements of the Volkswagen Beetle 1.4 TSI. We understand the importance of precision, especially when it comes to components that rotate at high speeds and are exposed to constant angular changes during driving. Our focus is on supplying parts that ensure vibration-free running and a long service life, essential for keeping your car feeling like new on the road.

What does the drive shaft do on a Volkswagen Beetle 1.4 TSI?

The main task of the drive shaft on a front-wheel-drive car such as the Volkswagen Beetle 1.4 TSI is to serve as the link between the power source and the road. It receives rotational power from the gearbox and delivers it to the wheel hubs. Yet it is far more than a simple solid bar; it must accommodate the vertical travel of the wheels via the suspension while they turn from left to right. This is made possible by the inner and outer CV joints fitted at each end of the shaft.

For a car fitted with the 1.4 TSI engine, the drive shaft is dimensioned to cope with city driving and motorway speeds with uncompromised stability. If a driveshaft becomes bent or the joints wear out, transmission efficiency is lost. This can lead to increased fuel consumption and unnecessary wear on other chassis components. A properly functioning drive shaft ensures that every bit of horsepower from the engine translates into controlled, safe propulsion.

Common signs of wear

Several clear symptoms indicate that it is time to inspect the drive shafts on your Beetle. One of the most common signs is a clicking or knocking noise when making sharp turns at low speed. This typically points to a worn outer CV joint, frequently caused by a split CV boot that has allowed dirt to enter. If you instead experience vibrations throughout the car under acceleration, the inner CV joint closest to the gearbox is usually starting to fail.

Another telltale sign to look for is grease splattered on the inside of the wheel rim or around the wheel arch. This is direct evidence that a CV joint boot has failed. If the boot is not replaced promptly, the lubricating grease will escape, leading to complete failure of the drive shaft in short order. Ignoring these warning signs can ultimately result in the drive shaft snapping entirely, rendering the car undriveable and risking secondary damage to the suspension.

How to choose the correct drive shaft

Finding the right Drive shafts for Volkswagen requires knowing your car's exact specification. For the Volkswagen Beetle 1.4 TSI, differences can arise depending on whether the car is equipped with a manual gearbox or a DSG automatic transmission. The length of the shafts and the number of splines (the teeth at the ends) can vary between these versions. Guessing the required part is therefore not advised, as even minor millimetre discrepancies can make installation impossible.

The most reliable way to get the correct part straight away is to select your car's make, model and engine in our vehicle selector. By entering your vehicle details, we filter the drive shafts that are technically compatible with your specific car. We also recommend checking whether you need to replace the left-hand (nearside) or right-hand (offside) shaft, as these almost always differ in length on front-wheel-drive cars. Taking care when selecting your part saves both time and money at the garage.

Related parts to check

Be sure to inspect these exact pages for the same vehicle when working on the drive shaft:

When one drivetrain component shows signs of wear, related parts on the vehicle often warrant inspection too. By comparing these exact pages for the Volkswagen Beetle 1.4 TSI, it becomes easier to determine whether the fault lies with the drive shaft itself or with an adjacent part of the drivetrain.

This is particularly relevant on models where vibrations, play and noises can transfer between different parts of the same drivetrain. A quick check of related categories reduces the risk of replacing the right type of component while overlooking an adjacent part that contributes to the same problem.

While working on the drive shaft or with the car raised, it is sensible to inspect surrounding components. Often, a drive shaft issue may have been caused by or affected other parts of the drivetrain. Always check the condition of the wheel bearings and ball joints, as these interact closely with the driveshaft. If you do not need to replace the complete assembly, replacing an individual constant velocity joint may suffice if the shaft bar remains undamaged.

Here are the primary related pages for your Volkswagen Beetle 1.4 TSI:

  • Volkswagen Beetle 1.4 TSI - General categories for your model.
  • Outer CV joints for Volkswagen Beetle 1.4 TSI - If you only need to replace the outer joint.
  • Inner CV joints for Volkswagen Beetle 1.4 TSI - If vibrations originate from near the gearbox.
Proactively replacing worn boots or joints can significantly extend the lifespan of your new drive shaft.

Why shop with CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, dispatching orders across the EU from our central warehouse in Helsingborg, Sweden. We focus on a deep, specialised inventory rather than selling generic parts for everything. This means we possess the technical expertise required to help you source the exact part for your Volkswagen Beetle 1.4 TSI. With our accurate fitment data, you can feel entirely confident that the part you order will fit your car seamlessly when chosen by make, model and engine.

We understand that when a drive shaft fails, you need a replacement without delay. We dispatch stocked items promptly to get your car back on European roads as quickly as possible. Our aim is to make maintaining your vehicle's drivetrain straightforward, reliable and cost-effective with high-grade car parts. Buying from a specialist gives you not just a spare part, but access to the knowledge needed for a successful repair. Choose the right component first time and experience the difference of having an expert by your side.

Frequently asked questions about drive shafts for Volkswagen Beetle 1.4 TSI

Does the same drive shaft fit both manual and DSG gearboxes on the Beetle 1.4 TSI?

No, drive shafts usually differ between manual and DSG gearboxes due to different lengths and mountings. Always select your vehicle's exact make, model and engine details to verify compatibility.

What are the most common symptoms of a failing drive shaft on my Beetle?

The most common signs are clicking noises when cornering (outer CV joint) or severe vibrations in the steering wheel and chassis during acceleration (inner CV joint).

Do I need to replace both drive shafts at the same time?

No, there is no requirement to replace both at the same time. You typically only replace the defective side. However, it is sensible to inspect the CV boots on the other side while you are at it.

Are CV joints included when I buy a complete drive shaft?

Yes, when you buy a complete drive shaft from us, it comes fully assembled with both the inner and outer CV joints as well as CV boots, ready for direct installation.

How long does it take to replace a drive shaft on a Volkswagen Beetle?

For an experienced mechanic, replacement typically takes between 1 and 2 hours per side, depending on the car's condition and whether any bolts are seized.

What happens if I drive with a broken drive shaft?

It can cause the shaft to snap entirely, leaving the car with no drive. It can also cause severe secondary damage to the gearbox and suspension.