Drive shafts for Volkswagen Golf VII Variant 1.5 TSI

Need a replacement drive shaft for your Volkswagen Golf VII Variant 1.5 TSI? As an international store backed by a Swedish driveline specialist, we offer a carefully selected range...

Products for Drive shafts for Volkswagen Golf VII Variant 1.5 TSI

11 products
1 - 11 of 11
Item no.:1100978
  • Position: Front left
  • Flange diameter: 100 mm
  • Total length: 517 mm
  • Splines gearbox side: 100
  • Splines wheel side: 36
Item no.:1111968
  • Position: Front left
  • Flange diameter: 108 mm
  • Total length: 513 mm
  • Splines gearbox side: 108
  • Splines wheel side: 36
Item no.:2139902
  • Position: Front right
  • Total length: 817 mm
  • Splines gearbox side: 40
  • Splines wheel side: 36
Item no.:2161034
  • Position: Front right
  • Total length: 783 mm
  • Splines gearbox side: 37
  • Splines wheel side: 36
Item no.:2173597
  • Position: Front right
  • Total length: 800 mm
  • Splines gearbox side: 100
  • Splines wheel side: 36
Item no.:119864
  • Position: Front left
  • Inner splines: 33
  • Total length: 523 mm
  • Splines wheel side: 36
Item no.:318681
  • Position: Front left
  • Flange diameter: 108 mm
  • Joint diameter: 108 mm
  • Total length: 495 mm
  • Splines wheel side: 36
Item no.:2184616
  • Position: Front right
  • Total length: 800 mm
  • Splines wheel side: 36
Item no.:1133988
  • Position: Front left
  • Splines wheel side: 36
Item no.:2172453
  • Position: Front right
  • Total length: 817 mm
  • Splines gearbox side: 40
  • Splines wheel side: 36
Item no.:1108409
  • Position: Front left
  • Flange diameter: 108 mm
  • Total length: 523 mm
  • Splines gearbox side: 108
  • Splines wheel side: 36

Drive shafts for Volkswagen Golf VII Variant 1.5 TSI

The Volkswagen Golf VII Variant 1.5 TSI is a versatile and technically sophisticated car built on the proven MQB platform. To keep this car agile and ensure smooth power delivery, the drive shaft is a vital component. The drive shaft is responsible for transmitting torque directly from the engine and gearbox out to the wheels, allowing the vehicle to move forward with precision. Because the 1.5 TSI engine is often equipped with modern technology such as active cylinder management (ACT), stringent demands are placed on the drivetrain to handle fluctuating loads without causing vibrations or cabin noises.

When choosing a drive shaft for your Golf VII Variant, quality must never be compromised. An undersized or incorrectly engineered shaft can cause premature wear on both the gearbox and the wheel bearings. At CVJoint24, we specialise in these exact components to ensure you receive a product that matches or exceeds original equipment specifications. With seven specifically matched products for this model variant, we ensure you can find an ideal solution for your car’s exact configuration.

What does a drive shaft do on a Volkswagen Golf VII Variant 1.5 TSI?

The primary task of the drive shaft on a front-wheel-drive Volkswagen Golf VII Variant 1.5 TSI is to serve as the final link in the powertrain. It takes the rotational force from the differential in the gearbox and directs it out to the front wheels. What makes the drive shaft remarkable is its ability to transfer power while the wheels move up and down with the suspension and turn left and right when steering. This is achieved via the inner and outer CV joints fitted at either end of the shaft.

For a car like the Golf VII Variant, which is frequently used as a family estate loaded with luggage, the driveshafts are subjected to considerable strain. The inner joint primarily manages vertical movements from the road surface, while the outer joint must cope with steep steering angles at full lock. A properly functioning drive shaft ensures smooth, uninterrupted power delivery, directly benefiting both fuel economy and driving dynamics.

Common signs of wear

There are several clear symptoms indicating that a drive shaft on your Volkswagen Golf VII Variant 1.5 TSI is wearing out. One of the most typical signs is a clicking or knocking noise when turning sharply at low speeds, such as during parking manoeuvres. This is usually caused by a worn outer constant velocity joint or a split boot that has allowed road dirt into the bearings. If you experience vibrations through the steering wheel or car chassis under acceleration, the inner CV joint is often the culprit.

Another sign to watch for is grease splattered across the inside of the wheel rim or over braking components. This points to a split drive shaft boot. Once grease escapes, lubrication is lost and the joint will rapidly overheat and suffer severe damage. Ignoring these warnings can ultimately cause the drive shaft to shear completely, immobilising the vehicle and potentially causing consequential damage to surrounding front suspension components. Regular inspection of your CV boots is therefore sensible preventive maintenance.

How to choose the correct drive shaft

Selecting the right drive shaft for a Volkswagen Golf VII Variant 1.5 TSI can be challenging because several technical specifications must align. It is not just about the model and engine, but also the transmission type fitted to the car – manual or DSG automatic. Shaft lengths and spline counts at each end can vary depending on the exact specification. Factory chassis setups or specific braking options can also influence the dimensions of the shaft.

To ensure you find the right fit straight away, we recommend selecting your exact make, model and engine variant in our vehicle filter. This narrows down the catalogue to parts compatible with your specific car. Always verify the dimensions in the product details, including overall length and spline count, for complete certainty. Our goal is to eliminate uncertainty when buying spare parts, and with our drivetrain expertise, you can rely on our components meeting the highest standards for your Volkswagen.

Related parts to inspect

Consider checking these related pages for the same vehicle when working on the drive shaft:

When one drivetrain component shows signs of wear, related parts on the car should also be checked. By comparing these specific pages for the Volkswagen Golf VII Variant 1.5 TSI, it becomes much easier to determine whether an issue lies with the drive shaft itself or with an adjacent part of the transmission system.

This is especially important on models where vibrations, play and unwanted noises can travel between several parts of the same driveline. A quick check of related categories reduces the risk of replacing one component while missing an adjacent worn part that contributes to the same problem.

Why buy from CVJoint24?

CVJoint24 is your dedicated specialist for driveline components. As an international shop backed by a Swedish driveline specialist, we offer a rare combination of thorough technical knowledge and an extensive catalogue that general car parts retailers struggle to match. We understand the engineering behind Volkswagen drivetrains and stock only components proven to withstand demanding European driving conditions. Our ethos is simple: supply the right part at the right price, with zero hassle.

When purchasing from us, you are supported by our accurate fitment guarantee, giving you complete peace of mind whenever you select your vehicle's exact make, model and engine. Dispatching directly from our central warehouse in Helsingborg, Sweden, we ensure prompt shipping across the EU so your car spends minimal time off the road. Focusing on quality, expertise and efficiency, we are the dependable choice for every Volkswagen owner who values reliability.

Frequently asked questions about drive shafts for Volkswagen Golf VII Variant 1.5 TSI

How do I know if the drive shaft on my Golf VII 1.5 TSI needs replacing?

The most common signs are clicking noises when cornering sharply, vibrations during acceleration, or visible grease leaks from damaged CV boots.

Is there a difference between drive shafts for manual and DSG gearboxes?

Yes, there is often a difference in both length and gearbox attachment depending on whether your car has a manual gearbox or a DSG automatic.

Can I replace just a CV joint instead of the entire drive shaft?

Yes, if the shaft bar itself is undamaged, you can often save money by replacing only the inner or outer CV joint.

What does your fitment guarantee mean?

It means we guarantee that the part will fit your car when you select your vehicle's make, model and engine variant, choosing a recommended product.

How long does delivery of a drive shaft take?

We aim for fast dispatch on all in-stock items so that you receive your parts as quickly as possible.

Do I need to replace both drive shafts at the same time?

No, there is no requirement to replace both sides at the same time, though they often wear at a similar rate.