Drive shafts for Volkswagen Golf VII Variant 2.0 TDI

Looking for a replacement drive shaft for your Volkswagen Golf VII Variant 2.0 TDI? This popular estate model with its torquey diesel engine places substantial demands on the drivetrain....

Products for Drive shafts for Volkswagen Golf VII Variant 2.0 TDI

22 products
1 - 22 of 22
Item no.:1166510
  • Position: Front left
  • Flange diameter: 108 mm
  • Total length: 487 mm
  • Splines wheel side: 36
Item no.:2130140
  • Position: Front right
  • Total length: 910 mm
  • Splines gearbox side: 37
  • Splines wheel side: 36
Item no.:2101700
  • Position: Front right
  • Flange diameter: 119 mm
  • Total length: 754 mm
  • Splines wheel side: 36
Item no.:2177093
  • Position: Front right
  • Flange diameter: 108 mm
  • Total length: 785 mm
  • Splines gearbox side: 108
  • Splines wheel side: 36
Item no.:1118180
  • Position: Front left
  • Flange diameter: 119 mm
  • Total length: 472 mm
  • Splines gearbox side: 119
  • Splines wheel side: 36
Item no.:2130168
  • Position: Front right
  • Total length: 783 mm
  • Splines gearbox side: 37
  • Splines wheel side: 36
Item no.:116617
  • Position: Front left
  • Total length: 557 mm
  • Splines gearbox side: 37
  • Splines wheel side: 36
Item no.:119192
  • Position: Front left
  • Flange diameter: 100 mm
  • Total length: 524 mm
  • Splines gearbox side: 100
  • Splines wheel side: 36
Item no.:214594
  • Position: Front right
  • Flange diameter: 100 mm
  • Total length: 815 mm
  • Splines gearbox side: 100
  • Splines wheel side: 36
Item no.:317744
  • Position: Front
  • Total length: 758 mm
  • Splines wheel side: 36
Item no.:317755
  • Position: Front
  • Splines wheel side: 36
Item no.:2171792
  • Position: Front right
  • Inner splines: 30
  • Splines wheel side: 36
Item no.:1107493
  • Position: Front left
  • Total length: 472 mm
  • Splines wheel side: 36
Item no.:2135797
  • Position: Front right
  • Total length: 763 mm
  • Splines wheel side: 36
Item no.:1149684
  • Position: Front left
  • Flange diameter: 108 mm
  • Total length: 470 mm
  • Splines wheel side: 36
Item no.:2106320
  • Position: Front right
  • Flange diameter: 119 mm
  • Total length: 760 mm
  • Splines wheel side: 36
Item no.:2109589
  • Position: Front right
  • Flange diameter: 108 mm
  • Total length: 780 mm
  • Splines gearbox side: 108
  • Splines wheel side: 36
Item no.:1113018
  • Position: Front left
  • Flange diameter: 119 mm
  • Total length: 475 mm
  • Splines gearbox side: 119
  • Splines wheel side: 36
Item no.:211193
  • Position: Front right
  • Flange diameter: 100 mm
  • Total length: 810 mm
  • Splines gearbox side: 100
  • Splines wheel side: 36
Item no.:1164735
  • Position: Front left
  • Flange diameter: 108 mm
  • Total length: 488 mm
  • Splines wheel side: 36
Item no.:211564
  • Position: Front right
  • Total length: 792 mm
  • Splines gearbox side: 108
  • Splines wheel side: 36
Item no.:218527
  • Position: Front right
  • Total length: 792 mm
  • Splines gearbox side: 108
  • Splines wheel side: 36

Drive shafts for Volkswagen Golf VII Variant 2.0 TDI

Welcome to our dedicated page for drive shafts for Volkswagen Golf VII Variant 2.0 TDI. As Swedish driveline specialists, we understand how important it is to fit the exact parts designed for your vehicle. The Golf VII Variant estate, especially with the high-torque 2.0 TDI engine, demands sturdy drive shafts that can transfer power reliably over many kilometres. We offer a comprehensive range for this specific model, giving you superb choice and depth when selecting spare parts. Whether you require a complete shaft for the left- or right-hand side, you can rely on our car parts to match or exceed original specifications, ensuring a safe, vibration-free driving experience.

What does a drive shaft do on a Volkswagen Golf VII Variant 2.0 TDI?

The drive shaft is a vital link in your vehicle's drivetrain. Its primary role is to transmit the torque produced by the 2.0 TDI engine and gearbox onwards to the front wheels, setting the car in motion. On a Volkswagen Golf VII Variant, the driveshaft must not only withstand heavy acceleration loads, but also accommodate substantial angles during steering and suspension travel. Because the 2.0 TDI engine delivers significant low-end torque, the drive shafts endure considerable stress whenever you depress the accelerator. A sound drive shaft ensures power reaches the tarmac smoothly without losses or annoying vibrations in the chassis.

Common signs of wear

Several clear symptoms suggest a drive shaft on your Volkswagen Golf VII Variant 2.0 TDI is nearing the end of its service life. One of the most typical signs is a clicking or knocking sound during sharp cornering at low speeds, which usually points to a worn outer CV joint. If you experience vibrations through the entire car during acceleration instead, play has often developed in the inner CV joint next to the gearbox. Grease splattered inside the wheel rim or wheel arch is another key indicator. This typically stems from a split CV boot, allowing grit to enter and rapidly destroy the moving joint components if not addressed immediately.

How to choose the correct drive shaft

Selecting the right drive shaft for your Volkswagen Golf VII Variant 2.0 TDI is essential for proper fitment and long-term durability. Technical details vary depending on your car's exact setup, such as whether it features a manual gearbox or a dual-clutch DSG automatic. Overall shaft length and the number of splines on each end can also differ. To make ordering straightforward, simply filter by your car's make, model and engine variant in our shop menu. Combining this accurate selection with our fitment guarantee ensures you receive the correct part straight away, avoiding unnecessary returns.

Related parts to inspect

Take a moment to check these exact pages for the same vehicle whilst working on your drive shaft:

When one drivetrain component shows wear, neighbouring parts on the vehicle often warrant inspection as well. Comparing these exact pages for Volkswagen Golf VII Variant 2.0 TDI makes it straightforward to establish whether the fault lies strictly with the drive shaft or another nearby section of the drivetrain.

This is particularly relevant on models where vibrations, play and unwanted noises can travel between several driveline components. Checking related categories reduces the risk of replacing one correct part while missing a connected component that causes the same underlying issue.

Inspecting these components helps you catch emerging issues early. If a CV joint boot is dried out or showing small surface cracks, replacing it promptly is far more economical than having to buy another complete driveshaft later due to dirt ingress.

Why shop with CVJoint24?

Choosing CVJoint24 means partnering with a Swedish driveline specialist offering deep technical expertise in transmission and drive components. We focus specifically on these systems, allowing us to supply a catalogue manufactured with outstanding precision and quality. For your Volkswagen Golf VII Variant 2.0 TDI, this ensures spare parts engineered to handle the exact weight and performance of your vehicle. Dispatched from our central warehouse in Helsingborg, Sweden across the EU, our car parts arrive swiftly so you spend minimal time with your car on axle stands. Our fitment guarantee provides complete peace of mind, whether you are tackling the job as a DIY mechanic or handing parts to your garage.

Frequently asked questions about drive shafts for Volkswagen Golf VII Variant 2.0 TDI

How do I know which drive shaft fits my Golf VII 2.0 TDI?

The most reliable method is to select your car's make, model, year and engine variant on our site. This filters out the exact drive shafts designed for your specific engine, gearbox and model year.

Is there a difference between drive shafts for manual and DSG gearboxes?

Yes, there can be differences in both length and mounting splines depending on whether your car has a manual gearbox or a DSG automatic. Always verify the specifications or filter by your specific model details.

What are the most common symptoms of a failing drive shaft?

The most frequent signs are clicking noises when turning (outer CV joint), vibrations during acceleration (inner CV joint), or visible grease leaks from torn CV boots.

Do I need to replace both drive shafts at the same time?

No, replacing both is not necessary if only one side is worn or damaged. However, it is always wise to inspect the CV boots and joints on the other side whilst carrying out the work.

Are CV boots and grease included when I buy a complete drive shaft?

Yes, when you purchase a complete drive shaft from us, it arrives fully assembled with inner and outer CV joints, boots and the correct amount of grease, ready to fit.

What does your fitment guarantee mean?

Our fitment guarantee means that we ensure the part selected matching your vehicle's exact make, model and engine specification will fit your car properly; if not, we will help you find the correct component at no extra cost.