Drive shafts for Volkswagen ID 4 GTX

Discover drive shafts engineered for the Volkswagen ID 4 GTX. This range is designed specifically for the all-wheel-drive SUV model produced since 2021. Select your make, model and...

Products for Drive shafts for Volkswagen ID 4 GTX

8 products
1 - 8 of 8
Item no.:1151969
  • Position: Front left
  • Total length: 663 mm
  • Splines gearbox side: 33
  • Splines wheel side: 38
Item no.:1157925
  • Position: Front left
  • Total length: 565 mm
  • Splines gearbox side: 33
  • Splines wheel side: 38
Item no.:2199748
  • Position: Front right
  • Total length: 721 mm
  • Splines gearbox side: 33
  • Splines wheel side: 38
Item no.:2150645
  • Position: Front right
  • Total length: 622 mm
  • Splines gearbox side: 33
  • Splines wheel side: 38
Item no.:4138030
  • Position: Rear left
  • Total length: 634 mm
  • Splines gearbox side: 37
  • Splines wheel side: 38
Item no.:5110021
  • Position: Rear right
  • Total length: 859 mm
  • Splines gearbox side: 37
  • Splines wheel side: 38
Item no.:110870
  • Position: Front left
  • Total length: 658 mm
  • Splines gearbox side: 33
  • Splines wheel side: 38
Item no.:116151
  • Position: Front left
  • Total length: 658 mm
  • Splines gearbox side: 33
  • Splines wheel side: 38

Drive shafts for Volkswagen ID 4 GTX

The Volkswagen ID 4 GTX represents the pinnacle of Volkswagen's electric SUV range, pairing performance with all-wheel drive. Handling the substantial power delivered by its twin electric motors demands a drive shaft of the highest quality. The drive shaft is the vital link transferring torque from the electric drive units to the wheels, and on a GTX model the stresses are considerably greater than on rear-wheel-drive variants. Here at CVJoint24 we understand the precise technical demands of this vehicle and supply parts that match or exceed original specifications.

Choosing the correct replacement part for an advanced electric car such as the Volkswagen ID 4 GTX demands care. Because the GTX model features driven front and rear axles, there are several different driveshafts to distinguish between. Our range is clearly arranged to help car owners and garages quickly locate the exact part needed. We focus on components engineered to handle the instant torque delivery characteristic of electric powertrains, preventing premature failures and maintaining a smooth, vibration-free ride.

What does a drive shaft do on a Volkswagen ID 4 GTX?

The primary job of a drive shaft on the Volkswagen ID 4 GTX is to transmit rotational torque from the vehicle's electric drive modules directly to the road wheels. As the GTX uses an all-wheel-drive (AWD) layout, it requires drive shafts at both the front and rear axles. These shafts must endure high loads while constantly accommodating large angle variations caused by steering and suspension travel. This places demanding loads on the integrated CV joints fitted at both ends of the shaft.

Electric drivetrains are far more compact and quiet than traditional combustion engine setups. Consequently, even the slightest imbalance or play in a driveshaft quickly becomes noticeable through vibrations or unwelcome noises. A properly functioning drive shaft also supports overall driving range and efficiency by keeping mechanical friction losses in the drivetrain to a minimum. Choosing a top-quality shaft is therefore not simply a matter of repair, but also of protecting the car's energy efficiency and driving dynamics.

Common symptoms of wear

Although the Volkswagen ID 4 GTX is a modern, robust vehicle, its drive shafts are subject to wear over time—particularly under spirited driving or through demanding European winters. One of the most typical signs that a drive shaft is failing is a rhythmic clicking noise heard when cornering tightly at lower speeds. This usually indicates that the outer constant velocity joint is worn or has lost its grease through a split CV boot.

Another common sign is noticeable vibration under acceleration. Because electric motors generate peak torque from a standstill, the inner joints are subjected to enormous forces. If you feel shuddering through the chassis as you press the accelerator, an inner CV joint may have developed excess play. Dealing with these symptoms early is vital to prevent collateral damage to the reduction gearbox or wheel bearings. Regularly checking each drive shaft boot is a reliable way to avoid expensive repairs down the road.

Choosing the right drive shaft

Identifying the correct drive shaft for your Volkswagen can feel daunting given the different technical specifications. On the Volkswagen ID 4 GTX, it is especially important to confirm whether you require a front or rear shaft, and for which side of the vehicle. The simplest and most reliable way to find the exact part is to select your vehicle's make, model and engine variant in our search filter. This instantly limits the selection to only those components engineered for your car.

When comparing options, check key technical specifications including overall length, spline tooth counts and whether fitting hardware is included. We always recommend replacing with a complete drive shaft assembly whenever there is doubt about the condition of the joints, as this is usually far more cost-effective than rebuilding individual parts. Our accurate fitment guarantee gives you total peace of mind that the part you receive will install directly without modifications.

Related parts to inspect

You may also wish to check these related pages for the same vehicle when working on the drive shaft:

When one drivetrain component exhibits wear, adjoining parts on the car often require attention as well. Checking these exact category pages for the Volkswagen ID 4 GTX makes it easier to confirm whether the problem lies within the drive shaft itself or in a neighbouring transmission component.

This is especially true on all-wheel-drive electric models where vibrations, play and mechanical noises can travel across the drivetrain. A quick check of related categories helps ensure you replace the root cause and do not overlook a related part that produces identical symptoms.

When fitting a new drive shaft, inspecting surrounding drivetrain and suspension parts is always good practice. Wear in one component often indicates that adjacent parts have experienced similar stress and may be nearing the end of their service life. Examine the wheel bearings and suspension links closely, as a damaged drive shaft can generate harsh vibrations that accelerate wear on these components. A thorough inspection saves both time and labour costs in the long run.

Here are the key categories to consider for your vehicle:

  • Volkswagen ID 4 GTX - Main overview for all drivetrain parts for your model.
  • Outer CV joints for Volkswagen ID 4 GTX - If wear is confined purely to the outer joint.
  • Drive shaft boots - Ensure boots are intact to keep grease in and protect new components.
  • Suspension and control arms - Check for excess play that could distort drive shaft working angles.

Why shop with CVJoint24?

CVJoint24 is your dedicated partner for transmission and driveline components. As an international shop backed by Swedish driveline specialists, we bring extensive technical expertise to modern electric platforms such as the Volkswagen ID 4 GTX. We recognise that drivers and workshops need dependable quality and prompt service, which is why we keep a comprehensive inventory ready for rapid dispatch across Europe from our central warehouse. When you order from us, you get premium car parts supported by genuine specialist advice.

We supply high-grade parts at competitive prices without compromising on precision or durability. With our accurate fitment guarantee, you can order with complete confidence, and our experienced customer service team is always available to assist with technical queries. We appreciate the importance of getting your car back on the road without delay. Choose a true driveline specialist—trust CVJoint24 for your next repair.

Frequently asked questions about drive shafts for Volkswagen ID 4 GTX

Do all ID 4 drive shafts fit the GTX model?

No, the GTX model features a unique all-wheel-drive powertrain with higher power output, meaning the drive shafts often differ from the standard rear-wheel-drive versions. Always select your vehicle by make, model and engine variant to ensure you receive the correct part.

What are the most common symptoms of a faulty drive shaft on an ID 4 GTX?

The most common signs are clicking noises when cornering (outer CV joint) or vibrations through the car under acceleration (inner CV joint or shaft imbalance).

Do I need to replace both drive shafts at the same time?

It is not mandatory, but if one side is worn out, there is a high probability that the other side has suffered similar wear. Replacing them in pairs can save you future garage time.

Are CV joints included when I buy a complete drive shaft?

Yes, when you buy a complete drive shaft from us, it comes fully assembled with both the inner and outer CV joint as well as CV boots, ready for direct installation.

How does a damaged drive shaft affect the range of my electric car?

A damaged drive shaft or a binding constant velocity joint creates increased friction and mechanical resistance, which can lead to slightly higher energy consumption and thus a reduced driving range.

What does the fitment guarantee at CVJoint24 mean?

It means we guarantee that the part will fit your Volkswagen ID 4 GTX when you select your specific vehicle details and follow our recommendations.