Drive shafts for Volkswagen Passat CC

Searching for a premium drive shaft for your Volkswagen Passat CC? As a Swedish driveline specialist, we offer a comprehensive range engineered specifically for this car. Choosing the...

Choose version

Choose a version to refine the results and get closer to the right product.

Products for Drive shafts for Volkswagen Passat CC

74 products
25 - 48 of 74
Item no.:2111079
  • Position: Front right
  • Total length: 884 mm
  • Splines gearbox side: 26
  • Splines wheel side: 36
Item no.:1133434
  • Position: Front left
  • Splines wheel side: 36
Item no.:116163
  • Position: Front left
Item no.:2169690
  • Position: Front right
  • Splines wheel side: 36
Item no.:2178833
  • Position: Front
  • Total length: 785 mm
  • Splines wheel side: 36
Item no.:614015
  • Position: Rear
  • Total length: 594 mm
  • Splines wheel side: 36
Item no.:517486
  • Position: Rear right
  • Total length: 631 mm
  • Splines wheel side: 36
Item no.:1154501
  • Position: Front left
  • Flange diameter: 119 mm
  • Total length: 475 mm
  • Splines gearbox side: 119
  • Splines wheel side: 36
Item no.:2148973
  • Position: Front right
  • Flange diameter: 119 mm
  • Total length: 754 mm
  • Splines wheel side: 36
Item no.:4128763
  • Position: Rear left
  • Flange diameter: 100 mm
  • Total length: 594 mm
  • Splines wheel side: 36
Item no.:5148841
  • Position: Rear right
  • Flange diameter: 100 mm
  • Total length: 631 mm
  • Splines wheel side: 36
Item no.:1181541
  • Position: Front left
  • Flange diameter: 108 mm
  • Total length: 488 mm
  • Splines wheel side: 36
Item no.:2203395
  • Position: Front right
  • Total length: 715 mm
  • Splines gearbox side: 28
  • Splines wheel side: 27
Item no.:2192108
  • Position: Front right
  • Flange diameter: 108 mm
  • Total length: 780 mm
  • Splines gearbox side: 108
  • Splines wheel side: 36
Item no.:1172752
  • Position: Front left
  • Total length: 586 mm
  • Splines gearbox side: 26
  • Splines wheel side: 36
Item no.:1117822
  • Position: Front left
  • Flange diameter: 108 mm
  • Total length: 486 mm
  • Splines gearbox side: 108
  • Splines wheel side: 36
Item no.:1158710
  • Position: Front left
  • Flange diameter: 108 mm
  • Total length: 523 mm
  • Splines gearbox side: 108
  • Splines wheel side: 36
Item no.:1287412
  • Position: Front left
  • Total length: 405 mm
  • Splines gearbox side: 28
  • Splines wheel side: 27
Item no.:2148101
  • Position: Front right
  • Flange diameter: 108 mm
  • Total length: 806 mm
  • Splines gearbox side: 108
  • Splines wheel side: 36
Item no.:311786
  • Position: Front
  • Splines wheel side: 36
Item no.:319015
  • Position: Front
  • Total length: 475 mm
  • Splines wheel side: 36
Item no.:2193693
  • Position: Front right
  • Total length: 793 mm
  • Splines wheel side: 36
Item no.:218033
  • Position: Front right
  • Flange diameter: 108 mm
  • Total length: 601 mm
  • Splines wheel side: 36
Item no.:310501
  • Position: Front
  • Inner splines: 27
  • Total length: 602 mm
  • Splines wheel side: 36
Showing 25–48 of 74 products

Drive shafts for Volkswagen Passat CC

The Volkswagen Passat CC is a car that combines sleek coupé styling with advanced German engineering, and its drivetrain demands first-rate components to maintain the comfort and performance the model is renowned for. A drive shaft for Volkswagen Passat CC is a critical link in the vehicle's power transmission, and with us you will find a carefully selected range covering everything from the early model years to later editions of this stylish car. With our comprehensive selection, we supply solutions for most engine variants and gearbox configurations available across the CC platform.

We understand the importance of an exact fit, particularly for a car with the Passat CC's specific chassis dynamics and often lowered sports suspension. That is why we work exclusively with parts that meet or exceed original equipment specifications. Every drive shaft is precision-balanced and tested to withstand the stresses of both high-speed motorway cruising and demanding city driving. By choosing a model-matched part from a specialist, you ensure that your vehicle's handling characteristics remain intact and the risk of future vibrations is minimised. Our focus is on delivering parts that make your Volkswagen feel like new again.

What does a drive shaft do on a Volkswagen Passat CC?

The primary task of the drive shaft on a Volkswagen Passat CC is to transfer the torque generated by the engine, via the gearbox or differential, directly to the road wheels. This is a complex mechanical process because the shaft must transmit high power whilst constantly accommodating suspension travel and, on the front axle, steering articulation. On a Passat CC, which is frequently equipped with punchy TSI or TDI engines, the driveshafts are subjected to substantial torque loads during brisk acceleration and spirited cornering.

The assembly consists of a high-tensile shaft fitted with an inner CV joint mounted to the gearbox and an outer CV joint located at the wheel hub. These joints are vital for ensuring that power delivery remains completely smooth regardless of steering angle. For vehicles equipped with 4MOTION four-wheel drive, there are also drive shafts on the rear axle that work alongside the Haldex system to distribute torque effectively across all four wheels, delivering superior traction in all weather conditions.

Common signs of wear and tear

There are several distinct symptoms indicating that a drive shaft on your Volkswagen Passat CC is worn or failing. One of the most typical signs is a rhythmic clicking or knocking noise that is clearly audible when turning sharply at low speeds, such as during parking manoeuvres. This noise almost always points to a worn outer CV joint or loss of lubrication caused by a split CV boot. If the noise disappears once you drive straight ahead, it is a very strong clue that the joint itself is failing.

Another common symptom is vibration felt through the steering wheel or the entire cabin under acceleration. This typically stems from excessive play inside the inner CV joint or an unbalanced shaft. You should also periodically inspect the wheel arches and the inner rims of your wheels for traces of grease. If a CV joint boot tears, grease is flung out by centrifugal force, leaving the constant velocity joint unprotected against road dirt, water and grit. If not attended to straight away, the joint will fail rapidly, which in the worst-case scenario can leave you stranded by the roadside.

How to choose the correct drive shaft

Selecting the correct drive shaft for your Volkswagen Passat CC requires care, as technical specifications vary considerably depending on the vehicle's exact build. Factors such as engine displacement, gearbox type (manual or DSG) and whether the car is front-wheel drive or four-wheel drive play a decisive role in identifying the correct replacement. Differences exist in total length, spline counts and whether the shaft is solid or tubular. Guessing the right part can result in frustrating returns and unnecessary workshop delays.

The most reliable way to find the correct component is to filter by your car's make, model and engine variant in our store. This narrows down the catalogue to parts technically validated for your specific Passat CC. Always confirm whether you require the left-hand or right-hand side, as the two driveshafts are rarely identical on this chassis. By shopping with a dedicated specialist, you benefit from deep product knowledge and our accurate fitment guarantee, allowing you to get the right part first time and install it with complete confidence.

Related parts to inspect

Please feel free to check these specific pages for the same vehicle when working on the drive shaft:

Whenever a drivetrain component shows signs of wear, neighbouring parts on the vehicle should also be inspected. By comparing these relevant categories for the Volkswagen Passat CC, it is much easier to identify whether an issue lies with the drive shaft itself or another adjacent component in the power transmission system.

This is especially true on models where vibrations, play and unusual noises can travel between multiple driveline assemblies. A quick look through related sections reduces the risk of replacing one correct part while overlooking an adjacent component that causes the same underlying symptoms.

Replacing a damaged CV boot early is the most cost-effective way to avoid replacing the complete drive shaft later. It is also wise to inspect the wheel bearings and suspension ball joints whilst the shaft is removed, as they are exceptionally easy to access at that stage.

Why buy from CVJoint24?

CVJoint24 is your dedicated partner when it comes to drivetrain and power transmission components for Volkswagen. As the international shop of a Swedish driveline specialist, we offer an exceptional combination of in-depth technical expertise and a wide range of car parts that general motor factors struggle to match. We focus exclusively on drivetrain components, meaning our specialist knowledge regarding the parts that propel your car is second to none. Every item dispatched from our central warehouse is carefully selected to meet rigorous standards for quality and longevity.

When you shop with us, you receive dependable spare parts backed by our fitment guarantee and friendly support from a team that understands the engineering of your Volkswagen Passat CC. We dispatch swiftly across Europe to keep your vehicle's downtime to a minimum, and our simple vehicle selector allows you to pick the exact match by make, model and engine with ease. Count on us for dependable driveline solutions delivered at competitive prices.

Frequently Asked Questions about Drive Shafts for Volkswagen Passat CC

How do I know if my Volkswagen Passat CC needs a new drive shaft?

The most common signs are clicking noises when making sharp turns, steering wheel vibrations during acceleration, or visible grease leaking from a torn CV boot in the wheel arch.

Can I replace just the CV joint instead of the entire drive shaft on my Passat CC?

Yes, if the shaft bar itself is undamaged and straight, you can often save money by only replacing the worn inner or outer CV joint.

Do drive shafts differ between manual and DSG gearboxes?

Yes, it is very common for both the overall length and spline count to differ between manual and automatic gearboxes. Always select your exact make, model and engine to ensure you get the right variant.

Does the same drive shaft fit both front-wheel drive and 4MOTION models?

No, the front driveshafts can differ, and the rear axles on 4MOTION models use completely unique drive shafts that do not feature on front-wheel-drive cars.

What is included when I purchase a complete drive shaft from you?

Our complete drive shafts are supplied fully assembled with inner and outer joints, CV boots, grease, and all necessary fitting hardware such as bolts or nuts.

How long does it take to replace a drive shaft on a Passat CC?

For an experienced mechanic, replacement typically takes between 1 and 2 hours per side, depending on the car's condition and whether any bolts have seized due to corrosion.