Drive shafts for Volkswagen Passat CC

Looking for a high-quality drive shaft for your Volkswagen Passat CC? As a Swedish driveline specialist, we offer an extensive range of 48 matching items for this model. Choosing the...

Choose version

Choose a version to refine the results and get closer to the right product.

Products for Drive shafts for Volkswagen Passat CC

74 products
1 - 24 of 74
Item no.:1164372
  • Position: Front left
  • Flange diameter: 119 mm
  • Total length: 475 mm
  • Splines wheel side: 36
Item no.:2123997
  • Position: Front right
  • Flange diameter: 119 mm
  • Total length: 754 mm
  • Splines wheel side: 36
Item no.:2163000
  • Position: Front right
  • Flange diameter: 119 mm
  • Total length: 555 mm
  • Splines wheel side: 36
Item no.:4144017
  • Position: Rear left
  • Flange diameter: 100 mm
  • Total length: 594 mm
  • Splines wheel side: 36
Item no.:5128700
  • Position: Rear right
  • Flange diameter: 100 mm
  • Total length: 631 mm
  • Splines wheel side: 36
Item no.:1168474
  • Position: Front left
  • Flange diameter: 108 mm
  • Total length: 488 mm
  • Splines wheel side: 36
Item no.:2247332
  • Position: Front right
  • Total length: 715 mm
  • Splines gearbox side: 28
  • Splines wheel side: 27
Item no.:2106628
  • Position: Front right
  • Flange diameter: 108 mm
  • Total length: 780 mm
  • Splines wheel side: 36
Item no.:1191961
  • Position: Front left
  • Total length: 586 mm
  • Splines gearbox side: 26
  • Splines wheel side: 36
Item no.:1117637
  • Position: Front left
  • Flange diameter: 108 mm
  • Total length: 486 mm
  • Splines wheel side: 36
Item no.:2133037
  • Position: Front right
  • Total length: 883 mm
  • Splines gearbox side: 26
  • Splines wheel side: 36
Item no.:1197267
  • Position: Front left
  • Flange diameter: 108 mm
  • Total length: 513 mm
  • Splines wheel side: 36
Item no.:1214910
  • Position: Front left
  • Total length: 405 mm
  • Splines gearbox side: 28
  • Splines wheel side: 27
Item no.:2187585
  • Position: Front right
  • Flange diameter: 108 mm
  • Total length: 806 mm
  • Splines wheel side: 36
Item no.:316662
  • Total length: 758 mm
  • Splines wheel side: 36
  • ABS teeth: 0
Item no.:314101
  • Splines wheel side: 36
Item no.:318276
  • Splines wheel side: 36
Item no.:1155970
  • Splines wheel side: 36
Item no.:2195577
  • Total length: 793 mm
  • Splines wheel side: 36
Item no.:216164
  • Position: Front right
  • Flange diameter: 108 mm
  • Total length: 601 mm
  • Splines wheel side: 36
Item no.:0171788
  • Total length: 810 mm
  • Splines gearbox side: 23
  • Splines wheel side: 36
Item no.:216395
  • Total length: 785 mm
  • Splines wheel side: 36
  • ABS teeth: 0
Item no.:2110075
  • Total length: 601 mm
  • Splines wheel side: 36
Item no.:1195845
  • Total length: 587,5 mm
  • Splines gearbox side: 26
  • Splines wheel side: 36
Showing 1–24 of 74 products

Drive shafts for Volkswagen Passat CC

The Volkswagen Passat CC is a car that combines elegant coupé styling with advanced German engineering, and its drivetrain demands first-rate components to maintain the comfort and performance this model is renowned for. A drive shaft for Volkswagen Passat CC is a critical link in the vehicle's power transmission, and with us you will find a carefully selected range covering everything from the earliest model years to the later versions of this sleek model. With 48 virtual products in our system, we provide solutions for most engine variants and gearbox configurations available across the CC platform.

We understand the importance of an exact fit, especially for a car with the specific chassis dynamics and often lowered sports suspension of the Passat CC. That is why we work exclusively with parts that meet or exceed original equipment specifications. Each drive shaft is balanced and tested to endure the stresses that arise during both motorway cruising and spirited urban driving. By choosing a model-matched part from a specialist, you ensure that the car's handling characteristics remain intact and that the risk of future vibrations is minimised. Our focus is on supplying car parts that make your Volkswagen feel like new again.

What does the drive shaft do on a Volkswagen Passat CC?

The primary task of the drive shaft on a Volkswagen Passat CC is to transfer the torque generated by the engine, via the gearbox or differential, directly to the wheels. This is a complex job because the shaft must transmit power while accommodating both suspension travel and, on the front axle, steering angles. On a Passat CC, which is frequently equipped with powerful TSI or TDI engines, the drive shafts are subjected to substantial torque loads during hard acceleration and sharp cornering.

The assembly consists of a robust bar fitted with an inner CV joint for Volkswagen Passat CC mounted towards the gearbox and an outer CV joint for Volkswagen Passat CC at the wheel hub. These joints are vital for smooth power transfer regardless of the angle the wheels are operating at. On models equipped with 4MOTION four-wheel drive, there are also drive shafts on the rear axle working alongside the car's Haldex system to distribute power optimally across all four wheels, delivering superior grip in all weather conditions.

Common signs of wear

Several distinct symptoms indicate that a drive shaft on your Volkswagen Passat CC is wearing out or damaged. One of the most common signs is a rhythmic clicking or knocking noise clearly audible when turning sharply at low speeds, such as during parking manoeuvres. This noise typically indicates that the outer CV joint is worn or that its lubrication has been lost due to a split CV boot. If the noise disappears when driving in a straight line, this strongly points to the constant velocity joint as the culprit.

Another frequent symptom is vibration felt through the steering wheel or throughout the car's body under acceleration. This is often caused by play inside the inner joint or by an out-of-balance driveshaft. You should also periodically inspect the wheel arches and the insides of the alloy wheels for splattered grease. If a CV joint boot tears, grease is flung out by centrifugal force, leaving the joint exposed to dirt, water and road grit. Without immediate attention, the joint will rapidly fail, which in the worst-case scenario can leave you stranded by the roadside.

How to choose the correct drive shaft

Selecting the right drive shaft for your Volkswagen Passat CC requires precision, as specifications vary considerably depending on the car's technical setup. Factors such as engine size, gearbox type (manual or DSG) and whether the car is front-wheel drive or four-wheel drive determine which shaft will fit. Differences include overall length, spline count (number of teeth) and whether the shaft bar is solid or hollow. Guessing the correct part can lead to costly returns and unnecessary downtime in the garage.

The safest and most reliable way to find the correct part is to select your car's make, model and engine in our vehicle selector. This automatically filters out the 48 virtual products that are technically validated for your specific Passat CC. Always check whether it is the left-hand or right-hand side that needs replacing, as the two sides are almost never identical on this model. By buying from a dedicated driveline specialist, you benefit from in-depth technical expertise and our fitment guarantee, allowing you to select the right part first time and install it with complete confidence.

Related components to inspect

We recommend also checking these exact pages for the same vehicle when working on the drive shaft:

When a driveline component shows signs of wear, neighbouring parts on the same car often require inspection as well. Comparing these exact pages for the Volkswagen Passat CC makes it easier to determine whether an issue lies with the drive shaft itself or with another adjoining part of the power transmission.

This is particularly relevant on models where vibrations, play and unusual noises can transfer symptoms across several parts within the same drivetrain. A quick check of related categories reduces the risk of replacing the correct type of part while missing an adjacent component that causes the very same issue.

Replacing a split CV boot in good time is the best way to prevent having to replace the entire drive shaft later. It is also wise to inspect the wheel bearings and ball joints while the shaft is removed, as they are readily accessible during the job.

Why shop with CVJoint24

CVJoint24 is your dedicated partner for Volkswagen drivetrain and power transmission components. As a Swedish driveline specialist shipping across the EU from our Helsingborg warehouse, we offer a unique blend of technical expertise and a targeted range that general car parts retailers struggle to match. We focus exclusively on drivetrain components, meaning we possess deep specialist knowledge of the exact parts that keep your car driving smoothly. Every item in our stock is carefully selected to satisfy rigorous standards of quality and durability.

Shopping with us gives you more than just spare parts; you also get the reassurance of our fitment guarantee and access to customer support that truly understands the engineering behind your Volkswagen Passat CC. We dispatch orders swiftly to minimise your car's time off the road, and our user-friendly vehicle selector by make, model and engine makes finding the correct part straightforward. We take pride in our specialist driveline heritage and always aim to offer you the best possible solution for your car at a competitive price. Your drivetrain is in safe hands with us.

Frequently Asked Questions about Drive Shafts for Volkswagen Passat CC

How do I know if my Volkswagen Passat CC needs a new drive shaft?

The most common signs are clicking noises when making sharp turns, steering wheel vibrations during acceleration, or visible grease leaking from a torn CV boot in the wheel arch.

Can I replace just the CV joint instead of the entire drive shaft on my Passat CC?

Yes, if the shaft bar itself is undamaged and straight, you can often save money by only replacing the worn inner or outer CV joint.

Do drive shafts differ between manual and DSG gearboxes?

Yes, it is very common for both the overall length and spline count to differ between manual and automatic gearboxes. Always select your exact make, model and engine to ensure you get the right variant.

Does the same drive shaft fit both front-wheel drive and 4MOTION models?

No, the front driveshafts can differ, and the rear axles on 4MOTION models use completely unique drive shafts that do not feature on front-wheel-drive cars.

What is included when I purchase a complete drive shaft from you?

Our complete drive shafts are supplied fully assembled with inner and outer joints, CV boots, grease, and all necessary fitting hardware such as bolts or nuts.

How long does it take to replace a drive shaft on a Passat CC?

For an experienced mechanic, replacement typically takes between 1 and 2 hours per side, depending on the car's condition and whether any bolts have seized due to corrosion.