Drive shafts for Volkswagen Passat Variant 1.8 T 20V

Are you looking for a high-quality drive shaft for your Volkswagen Passat Variant 1.8 T 20V? As a Swedish driveline specialist, we offer a carefully selected range of drive shafts...

Products for Drive shafts for Volkswagen Passat Variant 1.8 T 20V

14 products
1 - 14 of 14
Item no.:1133271
  • Position: Front left
  • Flange diameter: 130 mm
  • Total length: 596 mm
  • Splines gearbox side: 130
  • ABS teeth: 45
Item no.:1193116
  • Position: Front left
  • Flange diameter: 130 mm
  • Total length: 495 mm
  • Splines gearbox side: 130
  • ABS teeth: 45
Item no.:2179761
  • Position: Front right
  • Flange diameter: 130 mm
  • Total length: 617 mm
  • Splines gearbox side: 130
  • ABS teeth: 45
Item no.:1161049
  • Position: Front left
  • Flange diameter: 108 mm
  • Total length: 609 mm
  • Splines gearbox side: 108
  • ABS teeth: 45
Item no.:2191198
  • Position: Front right
  • Flange diameter: 130 mm
  • Total length: 498 mm
  • Splines gearbox side: 130
  • ABS teeth: 45
Item no.:2135066
  • Position: Front right
  • Flange diameter: 108 mm
  • Total length: 630 mm
  • Splines gearbox side: 108
  • ABS teeth: 45
Item no.:2193007
  • Position: Front right
  • Flange diameter: 130 mm
  • Total length: 524 mm
  • Splines gearbox side: 130
  • ABS teeth: 45
Item no.:119701
  • Position: Front left
  • Total length: 528 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:116673
  • Position: Front left
  • Total length: 600 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:314750
  • Total length: 625 mm
  • Splines gearbox side: 100
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:1158171
  • Position: Front left
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:314352
  • Position: Front
  • Total length: 502 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:1106515
  • Position: Front left
  • Total length: 602 mm
  • Splines wheel side: 33
  • ABS teeth: 45
Item no.:214900
  • Position: Front right
  • Total length: 620 mm
  • Splines gearbox side: 130
  • Splines wheel side: 33
  • ABS teeth: 45

Drive shafts for Volkswagen Passat Variant 1.8 T 20V

The Volkswagen Passat Variant 1.8 T 20V is a classic model renowned for its balance of performance and practical versatility. The drive shaft is a critical link in this setup, as it must reliably manage the torque delivered by the turbocharged 1.8-litre engine. At CVJoint24, you will find components engineered to meet the demanding requirements of this specific drivetrain. We understand that every detail matters when it comes to preserving the car's original handling characteristics and road safety.

By choosing a model-tailored Volkswagen Passat Variant 1.8 T 20V drive shaft, you ensure that power transfer takes place without causing unnecessary wear on surrounding drivetrain components. Our range is carefully curated to deliver the precision of original equipment parts, but at a more competitive price for the value-conscious car owner.

What does a drive shaft do on a Volkswagen Passat Variant 1.8 T 20V?

The drive shaft on a front-wheel-drive car like the Volkswagen Passat Variant 1.8 T 20V is responsible for transferring engine power from the gearbox to the front wheels. It consists of a shaft fitted with two joints: an inner CV joint that connects to the gearbox and an outer CV joint that connects to the wheel hub. These joints allow the shaft to move up and down with the suspension while articulating as you steer through bends.

For the 1.8 T 20V engine, it is particularly vital that the driveshaft is properly dimensioned to cope with the loads generated under hard acceleration and engine braking. Without a functioning drive shaft, the vehicle simply cannot move forward, and a failing shaft can cause severe collateral damage to both the gearbox and suspension if left unaddressed. Proper dimensions and quality materials are essential for lasting durability.

Common signs of wear and tear

There are several clear symptoms indicating that a drive shaft on your Passat is beginning to fail. One of the most common signs is a rhythmic clicking or knocking noise clearly audible during sharp turns, which typically points to a worn outer constant velocity joint. Vibrations through the steering wheel or throughout the whole car under acceleration, on the other hand, often suggest an issue with the inner joint, usually caused by imbalance or internal wear.

If you spot grease splattered on the inside of the wheel rim or around the wheel arch, it indicates that a CV boot has split. This is critical because road dirt quickly penetrates the boot, destroying the joint from within. Ignoring these warning signs can ultimately result in catastrophic failure where the shaft snaps, leaving the car stranded and requiring roadside recovery.

How to choose the correct drive shaft

Selecting the correct part for your specific Volkswagen Passat Variant 1.8 T 20V requires precision. Differences exist depending on whether the vehicle is equipped with a manual or an automatic gearbox, as well as whether you are replacing the left- or right-hand side. The overall length of the shaft and the number of splines (teeth) on the ends must match exactly to guarantee successful installation and flawless operation.

We always recommend selecting your car's make, model and engine variant in our store filter to narrow down the parts technically compatible with your specific model year and engine specification. This eliminates guesswork and ensures you receive a product that fits directly without any need for modifications. Getting the right part first time saves you both time and money during the repair while avoiding unnecessary returns.

Related parts to inspect

Be sure to also check these exact pages for the same vehicle when working on the drive shaft:

When a driveline component shows signs of wear, neighbouring parts on the same vehicle frequently warrant an inspection as well. By comparing these specific pages for the Volkswagen Passat Variant 1.8 T 20V, it becomes far simpler to determine whether a fault lies purely with the drive shaft or with an adjacent part of the transmission system.

This is especially pertinent on models where vibrations, play and unusual noises can transfer symptoms across multiple drivetrain components. A quick look through related categories minimises the risk of replacing the right type of part while missing a connected component that is contributing to the same underlying problem.

By taking a proactive approach and renewing worn auxiliary items alongside the drive shaft, you can significantly extend the operating life of your vehicle's entire power transmission setup and avoid duplicating labour down the line.

Why shop with CVJoint24?

CVJoint24 is your natural partner for all driveline and power transmission components. As a Swedish driveline specialist shipping across the EU from our Helsingborg warehouse, we offer an unmatched blend of technical expertise and comprehensive product coverage. We know how crucial it is to get the right part straight away, which is why we provide a reliable fitment guarantee when you select your vehicle's details in our shop.

With a steadfast focus on technical accuracy and high product quality, we ensure your Volkswagen Passat Variant 1.8 T 20V is set up for optimal reliability on the road. When you choose us, you are not simply buying a spare part; you gain access to years of practical experience and dedicated customer support from people who truly understand drivelines and the needs of vehicle owners.

Frequently asked questions about drive shafts for Volkswagen Passat Variant 1.8 T 20V

Does this drive shaft fit all Passat Variant 1.8 T 20V models?

Our drive shafts are specifically selected for the 1.8 T 20V engine, but it is important to check whether your car has a manual or automatic gearbox, as well as which side you need, to ensure the correct fit.

How do I know if the inner or outer joint is faulty?

Outer CV joints typically produce a clicking noise during sharp turns, whereas inner CV joints are more likely to cause vibrations through the car under straight-line acceleration.

Can I replace just the CV boot instead of the entire drive shaft?

If the joint has not suffered damage from dirt ingress or a lack of lubrication, replacing only the CV boot can be sufficient. If you can already hear knocking or clicking noises, however, replacing the joint or the complete driveshaft is usually required.

Is an ABS ring included on the drive shaft for the Passat Variant?

This varies between different items in our range. Always check the product description and confirm your car's exact make, model and engine variant to see what is included for your specific vehicle.

Is it difficult to replace a drive shaft yourself on a Passat 1.8 T?

It requires certain specialist tools and sound mechanical experience, although it is a standard procedure. We always recommend following the workshop manual for your vehicle to ensure the correct torque settings.

What does the fitment guarantee at CVJoint24 mean?

It means that when you select the exact make, model and engine and we confirm the part for your vehicle, we guarantee it will fit correctly. In the unlikely event that it does not fit, we will help you find the right component.