Drive shafts for Volkswagen Passat Variant 2.0

Looking for a replacement drive shaft for your Volkswagen Passat Variant 2.0? As Swedish driveline specialists shipping across Europe, we stock a carefully chosen range of parts built...

Products for Drive shafts for Volkswagen Passat Variant 2.0

10 products
1 - 10 of 10
Item no.:1170531
  • Position: Front left
  • Splines wheel side: 22
  • Total length: 552 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:2132292
  • Position: Front right
  • Splines wheel side: 22
  • Total length: 790 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:2162640
  • Position: Front right
  • Splines wheel side: 38
  • Total length: 500 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:2175563
  • Position: Front left
  • Splines wheel side: 38
  • Total length: 524 mm
  • Joint diameter: 114 mm
  • ABS teeth: 45
Item no.:1134570
  • Position: Front left
  • Splines wheel side: 33
  • Total length: 495 mm
  • Joint diameter: 88 mm
  • ABS teeth: 45
Item no.:2184606
  • Position: Front right
  • Splines wheel side: 33
  • Total length: 585 mm
  • Joint diameter: 88 mm
  • ABS teeth: 45
Item no.:1123167
  • Position: Front left
  • Splines wheel side: 33
  • Total length: 609 mm
  • Joint diameter: 88 mm
  • ABS teeth: 45
Item no.:2116939
  • Position: Front right
  • Splines wheel side: 33
  • Total length: 630 mm
  • Joint diameter: 88 mm
  • ABS teeth: 45
Item no.:1103570
  • Position: Front left
  • Splines wheel side: 33
  • Total length: 596 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:2123354
  • Position: Front right
  • Splines wheel side: 33
  • Total length: 617 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45

Drive shafts for Volkswagen Passat Variant 2.0

A Volkswagen Passat Variant 2.0 is a dependable, popular family estate that demands premium-grade components to maintain its renowned reliability and driving comfort. The drive shaft is one of the most critical links in the car's power transmission system, enduring tremendous stresses under every acceleration, braking manoeuvre and turn. Here at CVJoint24, you will find a broad, carefully curated selection of drive shafts engineered specifically for this exact model variant. With an extensive range in our catalogue, we provide solutions that meet or often exceed original equipment specifications (OE quality). Maintaining the drivetrain on your Volkswagen Passat Variant 2.0 is not merely a repair; it is an investment in your car's long-term service life and your safety on the road. We understand the importance of engineering precision, which is why we have tailored our range to cover every technical variation found across the 2.0 line-up.

What does the drive shaft do on a Volkswagen Passat Variant 2.0?

The drive shaft on a Volkswagen Passat Variant 2.0 has the fundamental duty of transferring the torque produced by the engine from the gearbox out to the front wheels. Because the 2.0-litre engine—whether petrol or diesel—delivers substantial torque low down in the rev range, exceptionally high demands are placed on the shaft's mechanical strength and balance. The drive shaft is a sophisticated assembly comprising a solid or tubular bar fitted with an inner and an outer CV joint. These constant velocity joints are vital, enabling the shaft to rotate and deliver power uninterrupted while the road wheels travel up and down with the suspension and turn during steering. For a front-wheel-drive estate like the Passat Variant, it is crucial that these components operate with minimal friction. Any imbalance or wear in the driveshaft causes energy losses and can eventually lead to secondary damage to both the gearbox and wheel bearings.

Common signs of wear

There are several distinct warning symptoms that every Volkswagen Passat Variant 2.0 owner should heed. One of the most prominent signs of a worn driveshaft is vibration felt through the steering wheel or vibrating throughout the car body, particularly under hard acceleration. This issue frequently stems from play developing in the inner CV joint closest to the gearbox, or from degraded grease inside the joint. Another classic symptom is a rhythmic clicking or knocking sound on full steering lock at lower speeds, which almost invariably points to a defective outer CV joint. You should also inspect the drive shaft boots on a regular basis; discovering grease splattered across the inside of the wheel rim or around suspension components is a critical telltale sign that a CV boot has split. Once grease escapes and road dirt enters, wear accelerates dramatically and can cause catastrophic failure, leaving the vehicle completely stranded.

How to choose the correct drive shaft

Selecting the correct drive shaft for a Volkswagen Passat Variant 2.0 requires careful attention, as technical specifications differ depending on your car's exact build. Dimensions and shaft lengths vary between cars with a manual gearbox and those fitted with an automatic DSG transmission. Furthermore, the number of splines (the splined teeth on the ends of the shaft) can vary between model years and individual engine options within the 2.0 range. Another key detail is whether your vehicle requires a drive shaft with an integrated ABS ring or relies on a magnetic reluctor sensor incorporated into the wheel bearing. To avoid ordering the incorrect part and ensure you get the job done right first time, we always advise selecting your vehicle by make, model and engine variant in our catalogue. This filters out incompatible parts to show the precise components matched to your chassis specifications, ensuring an exact fit and trouble-free installation.

Related parts to check

Be sure to inspect these exact pages for the same vehicle when working on the drive shaft:

Whenever a drivetrain component shows signs of wear, neighbouring parts on the same car often warrant inspection too. By checking these matching pages for the Volkswagen Passat Variant 2.0, you can easily determine whether a fault lies purely with the drive shaft or in an adjacent section of the drivetrain.

This is especially true on models where vibrations, play and unwanted noises can blur the lines between different driveline components. A quick look across related categories reduces the risk of replacing one correct part while overlooking an adjacent worn component contributing to the exact same symptoms.

By taking a proactive approach and replacing worn related car parts at the same time, you save both time and money in the long run by avoiding having to strip down the suspension and driveline twice.

Why buy from CVJoint24?

CVJoint24 is your dedicated partner and European driveline specialist, supported by our central warehouse in Helsingborg, Sweden. Over decades, we have accumulated comprehensive technical expertise across Volkswagen models, enabling us to provide an outstanding standard of support. When you order from us, your purchase is always backed by our fitment guarantee, giving you complete confidence that the part will fit your car when selected using our vehicle filter. We hold extensive stock of high-quality drive shafts, allowing for rapid dispatch and fast delivery right across the European Union. Our mission is always to deliver the right car parts at the right price without the fuss. Combining technical excellence with smooth online shopping, we ensure your Volkswagen Passat Variant 2.0 is quickly back on the road in top mechanical condition. Rely on a true specialist—choose CVJoint24 for your next drive shaft.

Frequently asked questions about drive shafts for Volkswagen Passat Variant 2.0

How do I know if the drive shaft on my Passat Variant 2.0 is faulty?

The most common signs are vibrations under acceleration, clicking noises when taking sharp turns, or grease splattered around the wheel arch caused by a torn CV boot.

Can I replace just the CV joint instead of the entire drive shaft?

Yes, if the shaft bar itself is undamaged, you can often replace only the inner or outer CV joint, which can be a more cost-effective option.

Does the drive shaft differ between manual and DSG gearboxes?

Yes, the length and spline count often differ depending on the gearbox type. Always select your car's make, model and engine to ensure you get the correct version.

Do I need to replace both drive shafts at the same time?

It is not mandatory, but because they have often experienced the same amount of wear, many drivers choose to replace both sides at once to prevent future issues.

Are CV boots and grease included when I buy a complete drive shaft?

Yes, our complete drive shafts are supplied fully assembled with new CV boots, premium grease, and all necessary fitting accessories.

How do I find the correct drive shaft for my specific model year?

The simplest and most reliable way is to select your make, model and engine in our search filter. This will display the range tailored precisely to your Volkswagen Passat Variant 2.0.