Drive shafts for Volkswagen Passat Variant 2.0 FSI 4MOTION

Need a replacement drive shaft for your Volkswagen Passat Variant 2.0 FSI 4MOTION? As a Swedish driveline specialist shipping across the EU, CVJoint24 provides a carefully curated range...

Products for Drive shafts for Volkswagen Passat Variant 2.0 FSI 4MOTION

9 products
1 - 9 of 9
Item no.:1154871
  • Position: Front left
  • Splines wheel side: 36
  • Total length: 524 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:1160041
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 584 mm
  • Joint diameter: 90 mm
Item no.:2174571
  • Position: Front right
  • Splines wheel side: 36
  • Total length: 815 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:2146501
  • Position: Front right
  • Splines wheel side: 36
  • Total length: 798 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:2116051
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 883 mm
  • Joint diameter: 90 mm
Item no.:4197187
  • Position: Rear left
  • Splines wheel side: 36
  • Total length: 594 mm
  • Diameter 2: 100 mm
  • Flange diameter: 100 mm
Item no.:5140221
  • Position: Rear right
  • Splines wheel side: 36
  • Total length: 631 mm
  • Diameter 2: 100 mm
  • Flange diameter: 100 mm
Item no.:217764
  • Position: Front right
  • Splines wheel side: 36
  • Total length: 600 mm
  • Joint diameter: 98 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:318905
  • Position: Front
  • Splines wheel side: 36
  • Total length: 820 mm
  • Joint diameter, gearbox side: 100 mm
  • Flange diameter: 100 mm

Drive shafts for Volkswagen Passat Variant 2.0 FSI 4MOTION

The Volkswagen Passat Variant 2.0 FSI 4MOTION is an estate renowned for its stability and sure-footed handling in demanding road conditions, thanks to its advanced all-wheel-drive system. The drive shaft plays a pivotal role in this system by transferring torque from the gearbox and differential out to the road wheels. Because the 4MOTION setup distributes power between the front and rear axles, each drive shaft is subjected to specific loads that demand high-quality components. At CVJoint24, you will find vehicle-specific drive shafts engineered to meet the exact technical requirements of your car. We understand the importance of every drivetrain component working in seamless harmony to maintain ride quality, handling and safety.

Our range features carefully selected parts tested to withstand the rigorous demands placed on a capable four-wheel-drive estate. By fitting a precision-matched drive shaft, you reduce the risk of driveline vibrations and premature failures, ensuring a safer and smoother drive for you and your passengers.

What does a drive shaft do on a Volkswagen Passat Variant 2.0 FSI 4MOTION?

The primary job of the drive shaft on a Volkswagen Passat Variant 2.0 FSI 4MOTION is to act as the final mechanical link in the powertrain. It receives rotational force and transmits it directly to the wheel hubs, driving the car forward. On an all-wheel-drive model like this, driveshafts are fitted to both the front and rear axles. They must endure substantial torque loads while accommodating constant changes in angle and length caused by steering inputs and suspension travel.

A fully functioning drive shaft ensures power is delivered smoothly and without mechanical loss, which is essential for performance and fuel efficiency. Without an intact drive shaft, you risk being stranded or causing secondary damage to surrounding drivetrain assemblies, such as the differential or gearbox. For this reason, it is critical not to overlook early signs of wear in these essential components.

Common signs of wear

Several telltale warning signs indicate that a drive shaft on your Volkswagen Passat Variant 2.0 FSI 4MOTION may need replacing. One of the most frequent symptoms is a sharp clicking or knocking noise when taking tight corners, which usually points to a worn outer CV joint. If you experience noticeable vibrations through the steering wheel or the cabin during acceleration, a worn inner constant velocity joint is often the culprit.

Regular inspection of the CV boots is equally important. If a drive shaft boot tears or splits, grease escapes rapidly while dirt and moisture enter, quickly destroying the precision-machined bearing surfaces inside the joint. Greasy, oily deposits splattered over the inside of the wheel rim are a classic indicator of a split boot. Rectifying minor boot damage early can often save you from having to replace the entire drive shaft assembly prematurely.

How to choose the correct drive shaft

Selecting the right drive shaft for a Volkswagen Passat Variant 2.0 FSI 4MOTION requires attention to detail, as configurations often vary depending on the gearbox type as well as the fitting position (front or rear, left or right). Because 4MOTION drivetrains feature a distinct layout compared to front-wheel-drive variants, checking the exact specifications is essential. The most reliable way to find the correct fit is to filter by your car's make, model and engine variant in our catalogue.

Selecting your specific model filters down to the exact items matching your vehicle's technical profile. You can also verify the overall shaft length and spline count to be entirely confident before ordering. Our dedicated driveline expertise means we offer a fitment guarantee, giving you complete peace of mind that your replacement part will fit accurately without any modifications.

Related components to inspect

We recommend checking these exact pages for the same vehicle when working on the drive shaft:

When one drivetrain component shows signs of wear, neighbouring parts on the same car often require attention as well. By cross-referencing these dedicated pages for the Volkswagen Passat Variant 2.0 FSI 4MOTION, it becomes much easier to determine whether an issue lies with the drive shaft itself or with an adjacent part of the power transmission system.

This is particularly valuable on four-wheel-drive models, where vibrations, play and unusual noises can travel between multiple linked components. A quick inspection of related categories minimises the risk of replacing one part while overlooking a worn neighbouring component that causes the same symptoms.

Replacing worn adjacent components at the same time saves both time and labour costs in the long run, avoiding the need to dismantle the suspension and hub assemblies more than once.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist shipping across the EU from our central warehouse in Helsingborg, Sweden. We combine a comprehensive parts catalogue with in-depth technical expertise to provide the best possible buying experience. When ordering from us, you can trust our precise vehicle data and fitment guarantee to deliver the exact part required for your car. We understand how essential your vehicle is for everyday transport, which is why we dispatch orders promptly to minimise workshop downtime.

With a firm focus on product quality and customer satisfaction, we are your trusted source for Volkswagen replacement parts. We only supply robust components built to exacting manufacturing standards, ensuring reliable service life and optimal operation. Select the right part first time and rely on a true specialist in Volkswagen Passat driveshafts and all-wheel-drive systems.

Frequently asked questions about drive shafts for Volkswagen Passat Variant 2.0 FSI 4MOTION

How do I know if the drive shaft fits my Passat 2.0 FSI 4MOTION?

The easiest and most reliable way is to filter by your car's make, model and engine variant in our shop. This ensures that you only see the drive shafts that are technically compatible with your specific vehicle.

Is there a difference between front and rear drive shafts on 4MOTION models?

Yes, the front and rear drive shafts differ in length, mountings and specifications. It is therefore essential to check the fitting position (front/rear as well as right/left) before making your purchase.

What are the most common symptoms of a failing drive shaft?

The most common signs are clicking noises when cornering (outer CV joint), vibrations during acceleration (inner CV joint), or visible grease leaking from a split CV boot.

Are CV joints included when I buy a complete drive shaft?

Yes, our complete drive shafts are normally supplied with both the inner and outer CV joints pre-assembled, complete with CV boots and grease, ready for direct installation.

Can I replace just the CV joint instead of the entire shaft?

Yes, if the shaft bar itself is undamaged, you can often replace just the worn CV joint. We supply both individual CV joints and complete driveshafts depending on your needs.

How quickly can I have my new drive shaft delivered?

We offer fast delivery on all in-stock items, meaning you will usually receive your new drive shaft shortly after placing your order.