Drive shafts for Volkswagen Passat Variant 2.0 TDI 16V

Searching for a high-quality drive shaft for your Volkswagen Passat Variant 2.0 TDI 16V? As a Swedish driveline specialist shipping across the EU, CVJoint24 offers precision-matched...

Products for Drive shafts for Volkswagen Passat Variant 2.0 TDI 16V

17 products
1 - 17 of 17
Item no.:1192909
  • Position: Front left
  • Flange diameter: 108 mm
  • Total length: 488 mm
  • Splines wheel side: 36
Item no.:1110553
  • Position: Front left
  • Flange diameter: 108 mm
  • Total length: 486 mm
  • Splines gearbox side: 108
  • Splines wheel side: 36
Item no.:2114326
  • Position: Front right
  • Flange diameter: 119 mm
  • Total length: 754 mm
  • Splines wheel side: 36
Item no.:1234516
  • Position: Front left
  • Total length: 405 mm
  • Splines gearbox side: 28
  • Splines wheel side: 27
Item no.:2213306
  • Position: Front right
  • Total length: 715 mm
  • Splines gearbox side: 28
  • Splines wheel side: 27
Item no.:1169280
  • Position: Front left
  • Flange diameter: 119 mm
  • Total length: 475 mm
  • Splines gearbox side: 119
  • Splines wheel side: 36
Item no.:2185554
  • Position: Front right
  • Flange diameter: 108 mm
  • Total length: 780 mm
  • Splines gearbox side: 108
  • Splines wheel side: 36
Item no.:316553
  • Position: Front
  • Total length: 758 mm
  • Splines wheel side: 36
Item no.:315178
  • Position: Front
  • Splines wheel side: 36
Item no.:2181262
  • Position: Front right
  • Inner splines: 30
  • Splines wheel side: 36
Item no.:311466
  • Position: Front
  • Splines wheel side: 36
Item no.:1132898
  • Position: Front left
  • Splines wheel side: 36
Item no.:213440
  • Position: Front right
  • Total length: 792 mm
  • Splines gearbox side: 108
  • Splines wheel side: 36
Item no.:2102552
  • Position: Front right
  • Total length: 793 mm
  • Splines wheel side: 36
Item no.:317197
  • Position: Front
  • Total length: 475 mm
  • Splines wheel side: 36
Item no.:211403
  • Position: Front right
  • Total length: 792 mm
  • Splines gearbox side: 108
  • Splines wheel side: 36
Item no.:2195774
  • Position: Front right
  • Total length: 795 mm
  • Splines wheel side: 36

Drive shafts for Volkswagen Passat Variant 2.0 TDI 16V

The Volkswagen Passat Variant 2.0 TDI 16V is a popular, capable vehicle that demands robust driveline components to perform at its best. The drive shaft is a vital link subjected to considerable strain, especially under the high torque delivered by the punchy 2.0 TDI engine. This specific engine variant places heavy demands on the drive shafts to transfer power reliably without flexing under load. A defective drive shaft can cause annoying knocking noises, but it can also severely compromise your car's stability and safety on the road.

When searching for a replacement drive shaft for this model, choosing a component tailored to the exact specifications of both the engine and gearbox is essential. At CVJoint24, we specialise in supplying the right parts so your car retains its dependability and ride comfort for tens of thousands of kilometres to come. By choosing model-matched components from us, you ensure your Passat retains its original handling feel, delivering power seamlessly without unnecessary wear on surrounding drivetrain parts.

What does the drive shaft do on a Volkswagen Passat Variant 2.0 TDI 16V?

The drive shaft on a Volkswagen Passat Variant 2.0 TDI 16V transfers power from the gearbox directly to the driven wheels. It consists of a durable shaft fitted with two constant velocity joints: an inner joint connecting to the gearbox and an outer CV joint at the wheel hub. These joints allow the shaft to articulate smoothly with suspension movements and steering angles while transmitting power continuously. On a front-wheel-drive Passat, this assembly is fundamental to dependable propulsion and responsive handling at all speeds.

Drive shafts on an estate car like the Passat Variant frequently encounter extra stress when carrying heavy loads or towing, which are typical tasks for this practical model. The inner joint accommodates the axial plunge as the wheel travels up and down, while the outer CV joint manages wide steering angles. Understanding this setup highlights why top-quality materials in both the shaft and the joints are vital for long service life, and why compromising on quality is never worth the risk.

Common signs of wear

Several clear symptoms point to a worn drive shaft or deteriorating joints on your Volkswagen Passat Variant 2.0 TDI 16V. One of the most frequent signs is a clicking or knocking noise on full steering lock at low speeds, typically indicating a failing outer CV joint. If you experience noticeable vibrations through the steering wheel or floorpan under acceleration, a worn inner joint is often the culprit. It is equally important to inspect the CV boots regularly; split boots allow grease to escape and abrasive road dirt to enter, quickly ruining the joint.

Beyond noises and vibrations, watch out for the vehicle pulling to one side under load or feeling unsettled at higher motorway speeds. A damaged driveshaft can also cause gearbox seal leaks if excessive vibration goes unaddressed. Ignoring these warning signs risks complete shaft failure, leaving you stranded and potentially causing severe, costly collateral damage to your suspension arms, wheel hub or gearbox casing.

Choosing the right drive shaft

Selecting the correct drive shaft for a Volkswagen Passat Variant 2.0 TDI 16V requires care, as variations exist across production years, manual versus automatic gearboxes, and specific brake setups. To be certain you order the exact replacement, select your car's make, model and engine variant in our vehicle selector. This filters for driveshafts with the correct overall length, inner and outer spline counts, and appropriate ABS ring configuration where required.

It is also wise to check whether your vehicle still runs original factory assemblies or if aftermarket parts were fitted previously, as this can influence joint fitment. Our components meet or exceed original equipment standards to guarantee trouble-free installation in the workshop. We always recommend comparing your existing part against the images and technical dimensions in our shop before fitting, ensuring a seamless match for your 2.0 TDI 16V estate.

Related parts to inspect

You can also check these exact pages for the same vehicle when working on the drive shaft:

When one drivetrain component shows signs of wear, related parts on the same vehicle should always be inspected. Navigating to these exact pages for the Volkswagen Passat Variant 2.0 TDI 16V makes it simple to determine whether the problem lies solely with the drive shaft or involves another section of the driveline.

This is especially true on models where vibrations, play and unwanted noises can transfer between multiple interconnected parts. Checking related categories reduces the risk of replacing one component while overlooking another that contributes to the very same problem.

Checking these components proactively saves both time and money in the long run. By replacing a split CV joint boot or addressing early joint wear promptly, you safeguard your entire drivetrain and prevent an unexpected breakdown on the road.

Why buy from CVJoint24?

CVJoint24 is your dedicated specialist for drivetrain and driveline components. As the international shop of a Swedish driveline specialist, we offer an extensive product catalogue paired with deep technical expertise in vehicles like the Volkswagen Passat Variant 2.0 TDI 16V. We supply premium-quality parts backed by a precise fitment guarantee, giving you complete confidence that your order will install without complications.

With dependable EU-wide dispatch from our Swedish warehouse and a platform designed to help you find the right component first time, we make sourcing car parts straightforward. We appreciate how important your car is for everyday travel and that you require spare parts built to last. Rely on CVJoint24 for proven expertise, fair prices and customer support that understands the mechanics of your vehicle inside out.

Frequently asked questions about drive shafts for Volkswagen Passat Variant 2.0 TDI 16V

How do I know if the drive shaft fits my Passat Variant 2.0 TDI 16V?

The most reliable way is to select your vehicle by make, model, and engine variant on our site. This filters the drive shafts that are technically verified for your exact engine and gearbox combination.

What are the most common symptoms of a faulty inner CV joint?

The most common sign is vibration through the car under acceleration, which often disappears when you ease off the throttle. This is caused by imbalance or wear in the joint closest to the gearbox.

Can I replace just the CV boot instead of the entire drive shaft?

Yes, if you catch a split CV boot early before dirt has contaminated and damaged the joint, you can replace just the boot. If you already hear clicking or knocking noises, the joint or the complete shaft is usually beyond repair.

Why is there a clicking noise when I turn in my Volkswagen?

A clicking noise on full steering lock almost always points to a worn outer CV joint. It is a classic symptom of the ball bearings wearing grooves into the joint's raceways.

Is there a difference between drive shafts for manual and DSG gearboxes?

Yes, there can be differences in both length and mounting design depending on the gearbox fitted to your Passat. Always check the specifications carefully against your car's equipment.

How long is the delivery time for a drive shaft from CVJoint24?

We aim for the fastest possible dispatch, shipping in-stock parts promptly from our central warehouse so you can get your car back on the road without delay.