Drive shafts for Volkswagen Passat Variant 2.8 V6 Syncro

Need a replacement drive shaft for your Volkswagen Passat Variant 2.8 V6 Syncro? As a dedicated Swedish driveline specialist, we offer a carefully chosen range engineered specifically...

Products for Drive shafts for Volkswagen Passat Variant 2.8 V6 Syncro

10 products
1 - 10 of 10
Item no.:1164569
  • Position: Front left
  • Splines wheel side: 38
  • Total length: 625 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:4115514
  • Position: Rear left
  • Splines wheel side: 38
  • Total length: 524 mm
  • Joint diameter: 114 mm
  • ABS teeth: 45
Item no.:2139453
  • Position: Front right
  • Splines wheel side: 38
  • Total length: 500 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:1165283
  • Position: Front left
  • Splines wheel side: 38
  • Total length: 611 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:6117321
  • Position: Rear
  • Splines wheel side: 33
  • Total length: 615 mm
  • Joint diameter: 88 mm
  • ABS teeth: 45
Item no.:212513
  • Position: Front right
  • Splines wheel side: 38
  • Total length: 620 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:2133488
  • Position: Front right
  • Splines wheel side: 38
  • Total length: 613 mm
  • Joint diameter, gearbox side: 100 mm
  • ABS teeth: 45
Item no.:1158778
  • Position: Front left
  • Splines wheel side: 38
  • Total length: 601 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:2150101
  • Position: Front right
  • Splines wheel side: 38
  • Total length: 621 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:1138486
  • Splines wheel side: 38
  • Total length: 602 mm
  • Joint diameter, gearbox side: 130 mm

Drive shafts for Volkswagen Passat Variant 2.8 V6 Syncro

Maintaining the drivetrain on a Volkswagen Passat Variant 2.8 V6 Syncro demands components capable of coping with the high torque of the V6 engine alongside the rigours of all-wheel drive. The drive shaft is a vital link in this setup and must be precisely sized to preserve the car's performance and road safety. Here you will find drive shafts technically verified specifically for this model variant, ensuring power transmission remains free from losses or vibrations. As specialists, we understand that every detail—from spline count to overall length—must match original equipment specifications so your car continues to deliver the driving dynamics it is renowned for.

What does a drive shaft do on a Volkswagen Passat Variant 2.8 V6 Syncro?

The primary job of the drive shaft on your Volkswagen Passat Variant 2.8 V6 Syncro is to transfer rotational power from the gearbox and differential out to the road wheels. In a Syncro four-wheel-drive system, this is especially intricate as power must be distributed efficiently across all four wheels depending on surface grip and load. The driveshaft has to cope with changing steering angles as well as vertical suspension travel, all while rotating at high speeds. Robust construction is essential to withstand the torsional forces generated under hard acceleration, particularly given the weight and power that a V6 engine brings to the drivetrain.

Common signs of wear

Several clear symptoms indicate that a drive shaft on your Volkswagen Passat Variant 2.8 V6 Syncro is deteriorating. One of the most frequent signs is a clicking or knocking sound that becomes noticeable when turning sharply, typically caused by wear in the outer CV joint. If you instead feel vibrations through the steering wheel or the entire chassis under acceleration, it may suggest that the inner joint is damaged or that the shaft has lost its balance. It is also vital to inspect the CV boots regularly; a split boot quickly allows road dirt to enter and grease to escape, which drastically accelerates wear on both the shaft and its constant velocity joints.

How to choose the correct drive shaft

When selecting a replacement drive shaft for your Volkswagen Passat Variant 2.8 V6 Syncro, it is essential to check technical details such as overall length, the number of teeth on the ABS ring, and the spline counts at both ends. Because the Syncro model features a unique configuration compared to front-wheel-drive variants, the shafts often differ between front and rear axles as well as between the left and right sides. To make your choice straightforward and dependable, we always recommend selecting your car by its exact make, model and engine variant. This filters out everything except the parts fully compatible with your specific vehicle, allowing you to order with complete peace of mind.

Related parts to inspect

Be sure to check these exact category pages for the same vehicle when working on your drive shaft:

When one drivetrain component shows signs of wear, adjacent parts on the same car often require attention too. Comparing these exact pages for the Volkswagen Passat Variant 2.8 V6 Syncro makes it easier to tell whether an issue lies purely within the drive shaft or in a neighbouring part of the power transmission system.

This is particularly relevant on models where vibrations, play and strange noises can transfer symptoms across several parts in the same drivetrain assembly. A quick check of related categories reduces the risk of replacing the right type of component while overlooking a neighbouring part that contributes to the very same problem.

By proactively maintaining these components, you extend the service life of your new drive shaft and preserve the car's optimum handling characteristics.

Why shop with CVJoint24?

CVJoint24 is your dedicated expert in drivetrain and power transmission components. As an international supplier backed by a specialist Swedish warehouse, we combine deep technical know-how with a comprehensive range to give you the best possible shopping experience. When you choose us, you receive premium spare parts backed by our accurate fitment data to ensure the component fits your Volkswagen Passat Variant 2.8 V6 Syncro properly. We know how important your car is for day-to-day driving, which is why we offer fast shipping on stocked items across the EU. With our focus on technical precision and dependable service, we help keep your vehicle on the road with minimal downtime.

Frequently asked questions about drive shafts for Volkswagen Passat Variant 2.8 V6 Syncro

Do these drive shafts fit both the front and rear of my Syncro?

No, the drive shafts differ between the front and rear axles on the Volkswagen Passat Variant 2.8 V6 Syncro. Select your car's exact model and engine details to find the correct axle position.

How do I know whether the inner or outer joint has failed?

Outer CV joints typically click when cornering, whereas inner joints cause vibrations during straight-line acceleration.

Are CV boots and grease included when I buy a complete drive shaft?

Yes, our complete drive shafts are supplied fully assembled with CV boots, grease, and the necessary fitting hardware.

Is it difficult to replace a drive shaft myself on a Passat V6 Syncro?

It requires solid mechanical knowledge and the right tools, particularly as the Syncro four-wheel-drive system can be tighter for space than standard models.

What does your fitment guarantee mean?

It means that once you select your vehicle's make, model, and engine specifications and we confirm the part, we guarantee it will fit your car correctly.

How quickly can I get my new drive shaft delivered?

We offer fast delivery on in-stock items across the EU, helping you get your car back on the road without delay.