Drive shafts for Volkswagen Polo 1.0 TSI

Need to replace a drive shaft on your Volkswagen Polo 1.0 TSI? As driveline specialists, we stock a carefully selected range of drive shafts tailored specifically to the energetic 1.0...

Products for Drive shafts for Volkswagen Polo 1.0 TSI

14 products
1 - 14 of 14
Item no.:1151638
  • Position: Front left
  • Splines wheel side: 36
  • Total length: 500 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 110 mm
Item no.:2183965
  • Position: Front right
  • Splines wheel side: 36
  • Total length: 778 mm
  • Flange diameter: 110 mm
Item no.:1179403
  • Position: Front left
  • Splines gearbox side: 33
  • Splines wheel side: 36
  • Total length: 640 mm
  • Joint diameter: 90 mm
Item no.:2113070
  • Position: Front right
  • Splines gearbox side: 33
  • Splines wheel side: 36
  • Total length: 907 mm
  • Joint diameter: 90 mm
Item no.:2149658
  • Position: Front right
  • Splines wheel side: 36
  • Total length: 802 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 110 mm
Item no.:1158790
  • Position: Front left
  • Splines gearbox side: 33
  • Splines wheel side: 36
  • Total length: 580 mm
  • Diameter 1: 90 mm
Item no.:2149537
  • Position: Front right
  • Splines gearbox side: 33
  • Splines wheel side: 36
  • Total length: 855 mm
  • Diameter 1: 90 mm
Item no.:1128257
  • Position: Front left
  • Splines wheel side: 36
  • Total length: 475 mm
  • Joint diameter, gearbox side: 110 mm
  • Flange diameter: 110 mm
Item no.:2139112
  • Position: Front right
  • Splines wheel side: 36
  • Total length: 762 mm
  • Joint diameter: 98 mm
  • Joint diameter, gearbox side: 110 mm
Item no.:2164183
  • Splines wheel side: 36
  • Total length: 777 mm
Item no.:219973
  • Position: Front right
  • Splines wheel side: 36
  • Total length: 780 mm
  • Diameter 1: 90 mm
  • Diameter 2: 110 mm
Item no.:113690
  • Position: Front left
  • Splines wheel side: 36
  • Total length: 660 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 110 mm
Item no.:2124306
  • Position: Front right
  • Splines gearbox side: 33
  • Splines wheel side: 36
  • Total length: 910 mm
Item no.:2145145
  • Position: Front right
  • Splines gearbox side: 33
  • Splines wheel side: 36
  • Total length: 896 mm

Drive shafts for Volkswagen Polo 1.0 TSI

The Volkswagen Polo 1.0 TSI is a modern, technologically advanced small car where every component in the drivetrain plays a crucial role in both fuel efficiency and driving dynamics. The drive shaft is a central element in this system, responsible for transferring power from the engine and gearbox directly to the road wheels. Because the 1.0 TSI engine delivers spirited torque low in the rev range, the drive shafts face constant strain during every acceleration and turn. Choosing a high-quality drive shaft is therefore vital to maintaining your car's long-term performance and safety.

At CVJoint24, you will find a wide range of drive shafts engineered to meet or exceed original equipment specifications for your Volkswagen Polo. We understand the importance of exact fitment, especially in a compact hatchback like the Polo where space within the wheel arches and around the gearbox is tightly packaged. Our parts are tested to satisfy strict requirements for material strength and flexibility in modern front-wheel-drive vehicles.

What does a drive shaft do on a Volkswagen Polo 1.0 TSI?

The primary task of the drive shaft on a Volkswagen Polo 1.0 TSI is to act as the final link in the power transmission. When you press the accelerator, torque flows from the engine through the gearbox to the differential, and from there the drive shafts take over. They must transfer this power while allowing the front wheels to move up and down over bumps and pivot smoothly when steering. This dual role is made possible by the inner and outer CV joints fitted at either end of the shaft.

For a car powered by a compact turbocharged engine like the 1.0 TSI, it is essential that the drive shaft is perfectly balanced and manufactured to tight tolerances. An unbalanced shaft causes unwanted vibrations that compromise driving comfort and risk damaging neighbouring drivetrain components, including gearbox seals and wheel bearings. Keeping your drive shaft in top condition ensures engine power reaches the tarmac cleanly without unnecessary mechanical losses.

Common signs of wear

Several clear symptoms indicate that a drive shaft on your Volkswagen Polo 1.0 TSI is worn or damaged. One of the most typical signs is a clicking or knocking noise on full steering lock at low speeds, such as during parking manoeuvres. This usually points to a worn outer CV joint, frequently caused by a split CV boot letting in grit and moisture. If the noise occurs instead under straight-line acceleration, a worn inner joint is often the culprit.

Vibrations felt through the steering wheel or car body while driving, particularly at higher speeds, are another serious warning sign. These vibrations can signal a bent shaft or excessive play in an inner joint. If you spot grease splattered on the inside of the road wheel or inside the wheel arch, a torn boot is almost certainly the cause. Ignoring these warnings risks outright mechanical failure, which can leave you stranded without drive at the roadside.

How to choose the correct drive shaft

Selecting the correct drive shaft for your Volkswagen Polo 1.0 TSI requires attention to detail, as parts vary depending on gearbox type (manual or DSG automatic) and model year. Key differences include overall length, spline count on the joint stubs, and the specific ABS setup. To make sure you order the exact match for your vehicle, simply select your car's make, model and engine variant in our store catalogue.

When comparing options, check whether the replacement shaft comes fully assembled with CV joints and boots, which is often the most cost-effective solution for workshop repairs. A complete driveshaft saves significant fitting time and ensures every component is brand new and balanced together. Be sure to verify whether you need the left-hand or right-hand side, as the two sides are almost never identical on front-wheel-drive models like the Polo.

Related parts to check

Make sure to inspect these related pages for the same vehicle when working on the drive shaft:

When one drivetrain component shows signs of wear, nearby parts on the same car often require attention too. Comparing these exact pages for the Volkswagen Polo 1.0 TSI makes it easier to determine whether an issue lies with the drive shaft itself or with another connected part of the driveline.

This is especially important on models where vibrations, play and strange noises can easily travel between adjacent components in the drivetrain. A quick check of related categories helps ensure you replace the correct item without overlooking a neighbouring part that causes the same symptoms.

Carrying out a comprehensive inspection of the front suspension and drivetrain whenever a drive shaft is replaced prolongs the lifespan of the entire assembly and keeps your Volkswagen Polo 1.0 TSI driving quietly and smoothly.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist shipping across the EU from our warehouse in Helsingborg, Sweden. We combine in-depth technical expertise with a high-calibre parts catalogue, making us the trusted choice for both DIY mechanics and professional garages. When you order from us, you benefit from our precise fitment standards, giving you complete confidence that the parts chosen for your vehicle's make, model and engine will fit correctly first time.

We know that when a drive shaft fails, you need a replacement without delay. We dispatch quickly from our extensive inventory across Europe. With our focus on premium quality, clear technical specifications and expert customer support dedicated to driveline systems, we provide a smooth shopping experience. You can always rely on us for the right part at the right price to get your Volkswagen Polo 1.0 TSI back on the road in prime condition.

Frequently asked questions about drive shafts for Volkswagen Polo 1.0 TSI

How do I know if my Volkswagen Polo 1.0 TSI needs a new drive shaft?

The most common signs are clicking noises when turning, vibrations under acceleration, or visible grease leaks from damaged CV boots. If the vibrations increase with speed, it often indicates imbalance or play in the drive shaft.

Can I replace just the CV joint instead of the entire shaft?

Yes, if the shaft bar itself is undamaged, you can often replace just the outer or inner CV joint. However, in cases of severe wear or if the shaft has bent, a complete drive shaft is usually the most durable and cost-effective solution.

Does the same drive shaft fit both manual and DSG gearboxes?

No, drive shafts usually differ between manual and automatic (DSG) gearboxes on the Volkswagen Polo 1.0 TSI. It is therefore crucial to check your gearbox type or select your specific model details before ordering.

What happens if I drive with a faulty drive shaft?

Driving with a defective drive shaft can lead to a complete loss of drive, leaving the car stranded. In the worst case, a broken joint can seize or snap, causing secondary damage to the suspension and gearbox.

How do I find the right part for my car?

Select your make, model, and engine variant using our search selector at the top of the page. Our system will filter the 15 products that are technically matched to your specific Volkswagen Polo 1.0 TSI, ensuring the correct fitment.

Is there a difference between the right and left drive shaft on a Polo 1.0 TSI?

Yes, on most front-wheel-drive cars like the Polo, the drive shafts are different lengths due to the position of the gearbox. Always check the product description to confirm whether the part is intended for the left-hand or right-hand side.