Drive shafts for Volkswagen T ROC

Welcome to CVJoint24, your dedicated driveline specialist when you need a new drive shaft for your Volkswagen T ROC. We understand the importance of exact fitment on this modern...

Choose version

Choose a version to refine the results and get closer to the right product.

Products for Drive shafts for Volkswagen T ROC

42 products
1 - 24 of 42
Item no.:2125401
  • Position: Front right
  • Total length: 817 mm
  • Splines gearbox side: 40
  • Splines wheel side: 36
Item no.:1173415
  • Position: Front left
  • Flange diameter: 108 mm
  • Total length: 523 mm
  • Splines wheel side: 36
Item no.:1143070
  • Position: Front left
  • Flange diameter: 108 mm
  • Total length: 488 mm
  • Splines wheel side: 36
Item no.:2128913
  • Position: Front right
  • Flange diameter: 119 mm
  • Total length: 575 mm
  • Splines wheel side: 36
Item no.:4131351
  • Position: Rear left
  • Flange diameter: 94 mm
  • Total length: 611 mm
  • Splines wheel side: 36
Item no.:5110140
  • Position: Rear right
  • Flange diameter: 94 mm
  • Total length: 650 mm
  • Splines wheel side: 36
Item no.:1182168
  • Position: Front left
  • Total length: 562 mm
  • Splines gearbox side: 37
  • Splines wheel side: 36
Item no.:2116408
  • Position: Front right
  • Flange diameter: 108 mm
  • Total length: 600 mm
  • Splines wheel side: 36
Item no.:2164319
  • Position: Front right
  • Flange diameter: 110 mm
  • Total length: 767 mm
  • Splines wheel side: 36
Item no.:1136340
  • Position: Front left
  • Flange diameter: 110 mm
  • Total length: 485 mm
  • Splines wheel side: 36
Item no.:2196757
  • Position: Front right
  • Total length: 783 mm
  • Splines gearbox side: 37
  • Splines wheel side: 36
Item no.:2129039
  • Position: Front right
  • Flange diameter: 108 mm
  • Total length: 780 mm
  • Splines wheel side: 36
Item no.:315710
  • Position: Front left
  • Flange diameter: 119 mm
  • Total length: 470 mm
  • Splines wheel side: 36
Item no.:219609
  • Position: Front right
  • Total length: 910 mm
  • Splines gearbox side: 37
  • Splines wheel side: 36
Item no.:113759
  • Position: Front left
  • Flange diameter: 100 mm
  • Total length: 524 mm
  • Splines wheel side: 36
Item no.:213268
  • Position: Front right
  • Flange diameter: 100 mm
  • Total length: 815 mm
  • Splines wheel side: 36
Item no.:215238
  • Position: Front right
  • Flange diameter: 119 mm
  • Total length: 760 mm
  • Splines wheel side: 36
Item no.:214347
  • Position: Front right
Item no.:1105883
  • Position: Front left
  • Flange diameter: 108 mm
  • Total length: 488 mm
  • Splines wheel side: 36
Item no.:2157797
  • Position: Front right
  • Flange diameter: 119 mm
  • Total length: 575 mm
  • Splines wheel side: 36
  • ABS teeth: 0
Item no.:4120067
  • Position: Rear left
  • Flange diameter: 94 mm
  • Total length: 611 mm
  • Splines wheel side: 36
Item no.:5142680
  • Position: Rear right
  • Flange diameter: 94 mm
  • Total length: 650 mm
  • Splines wheel side: 36
Item no.:1190112
  • Position: Front left
  • Total length: 560 mm
  • Splines gearbox side: 37
  • Splines wheel side: 36
Item no.:211168
  • Position: Front right
  • Flange diameter: 108 mm
  • Total length: 601 mm
  • Splines wheel side: 36
Showing 1–24 of 42 products

Drive shafts for Volkswagen T ROC

The Volkswagen T ROC has quickly become a favourite on European roads thanks to its blend of SUV qualities and agile styling. To maintain that dynamic driving experience, your drivetrain must remain in peak condition. A drive shaft for Volkswagen T ROC is a critical component subjected to severe stresses during every acceleration and turn. Because the T ROC is built on a modern architecture with sophisticated driver-assist systems, replacement components must meet rigorous technical standards. We provide an extensive range of complete drive shafts tailored specifically to the diverse drivetrain options available for this model.

Whether your car is fitted with a manual gearbox or the popular DSG transmission, there are precise requirements regarding drive shaft length, spline counts and mounting interfaces. By choosing a model-specific drive shaft for Volkswagen from our range, you ensure that power delivery remains efficient and free from unwanted vibrations. We focus on supplying parts that meet or exceed original equipment specifications, providing a dependable, long-term repair for your vehicle.

What does a drive shaft do on the Volkswagen T ROC?

The primary task of the drive shaft on a Volkswagen T ROC is to transfer torque from the gearbox to the wheels while accommodating suspension travel and steering angles. Front-wheel-drive models utilise two front drive shafts, whereas 4Motion all-wheel-drive versions also use rear driveshafts to power the rear wheels. Each drive shaft consists of an axle bar and two joints: an inner CV joint at the gearbox end and an outer CV joint at the wheel hub. These joints are sealed with rubber CV boots that keep out road dirt and retain essential lubricating grease.

On a modern vehicle like the T ROC, the drive shaft also interacts with key safety systems. Many variants feature integrated reluctor rings or magnetic encoders that feed data to the ABS and ESP electronics. If a drive shaft is damaged or incorrectly dimensioned, it can compromise how these active safety systems perform. For this reason, it is vital to treat the drive shaft not merely as a steel bar, but as an integral part of an intelligent drivetrain that demands precise engineering in every detail.

Common signs of wear

Several distinct symptoms indicate that a drive shaft on your Volkswagen T ROC may need replacing. One of the most typical signs is a distinct clicking or knocking noise when cornering on full lock at lower speeds, such as during parking manoeuvres. This almost always points to a worn outer CV joint. If you experience vibrations through the steering wheel or throughout the cabin under acceleration instead, the culprit is often an out-of-balance inner constant velocity joint or a bent shaft bar.

Another clear warning sign is grease splattered across the inside of the wheel rim or around the wheel arch. This is typically caused by a split CV boot. When a boot fails, dirt penetrates the joint while grease is flung out, accelerating wear and causing the joint to fail very quickly. Ignoring these warnings can lead to complete mechanical breakdown, leaving the vehicle stranded with no drive. By acting promptly on subtle changes in vehicle behaviour, you can resolve the issue before it causes secondary damage elsewhere in the drivetrain.

Choosing the correct drive shaft

Selecting the right drive shaft for a Volkswagen T ROC can initially seem tricky due to the extensive line-up of engine and gearbox combinations. Differences between shafts usually involve overall length, spline tooth counts at both ends, and whether the shaft is intended for the near side or off side. Driveshafts also differ substantially between front-wheel drive and 4Motion four-wheel drive configurations. To make selecting your part simple and reliable, we recommend filtering our catalogue by your vehicle's make, model and engine.

Filtering by your vehicle details narrows our selection of 42 items down to the precise parts engineered for your specific car. This eliminates the uncertainty of receiving a replacement that does not fit during installation. We invest substantial effort into keeping our fitment database accurate, which underpins our fitment guarantee. If you are unsure whether you require an entire drive shaft assembly or merely an individual CV joint, our customer support team of driveline specialists is on hand to assist you.

Related parts to check

We also recommend checking these exact pages for the same vehicle when working on the drive shaft:

When one drivetrain component develops wear, neighbouring parts on the same car often require attention as well. By cross-referencing these dedicated pages for the Volkswagen T ROC, it becomes much easier to determine whether the problem lies in the drive shaft itself or in an adjacent section of the driveline.

This is especially true on modern platforms where vibrations, play and unusual noises can easily transfer across different driveline components. Checking related categories helps ensure you do not replace one part while overlooking a neighbouring component that shares the same underlying defect.

Inspecting the entire assembly at the same time will save you both time and workshop labour over the vehicle's lifespan. A smooth, properly functioning drivetrain reduces stress on tyres and wheel bearings, keeping overall running costs lower.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, dispatching orders across Europe from our central warehouse in Helsingborg, Sweden. We focus on a targeted, highly specialised range of driveline components, providing depth of technical expertise that general car parts stores rarely match. When you order a drive shaft for your Volkswagen T ROC from us, you receive high-grade spare parts backed by the technical certainty needed for a straightforward, successful repair.

We dispatch our orders rapidly across the EU because we understand how important it is to get your vehicle back on the road without delay. With our accurate fitment guarantee and strict focus on premium OE-quality parts, we are the trusted partner for DIY mechanics and professional garages alike. Count on dependable parts backed by genuine driveline know-how.

Frequently Asked Questions about Drive Shafts for Volkswagen T-ROC

How do I know if I need to replace the entire drive shaft or just a CV joint?

If the shaft bar itself is straight and undamaged, replacing the worn joint is often sufficient. However, if the shaft has taken an impact, is heavily rusted at the mating surfaces, or both joints are worn, it is usually more cost-effective and safer to replace the complete drive shaft as an assembly.

Does the same drive shaft fit both front-wheel drive and 4Motion T-ROC models?

No, they often differ between models. 4Motion models have specific drive shafts both front and rear to handle the all-wheel drive system. Always select your car's exact make, model and engine in our vehicle selector to ensure you receive the correct version for your drivetrain.

What tools are needed to replace a drive shaft on a Volkswagen T-ROC?

You generally require a heavy-duty socket for the hub nut (often a 12-point bi-hex), tools to release the ball joint or control arm, and hex or XZN/spline bits to unbolt the inner joint from the gearbox flange. A torque wrench is also essential for correct tightening.

Why does my T-ROC vibrate during acceleration after replacing a drive shaft?

If vibrations occur after replacement, it may be because the shaft is not properly seated and centred, the contact faces were not cleaned, or in rare cases due to a manufacturing defect in balancing. Also check that all bolts have been torqued to the correct specification.

Is there a difference in drive shafts between manual and DSG gearboxes?

Yes, the length and mounting flanges very often differ between manual gearboxes and DSG automatics. It is therefore crucial to verify your gearbox type before ordering, which you can easily do by selecting your specific model and engine in our shop.

How long does it take to replace a drive shaft?

For an experienced mechanic, it typically takes between 1 to 2 hours per side, depending on how easily components come apart. For a DIY mechanic, it may take a little longer as it requires safely raising the car and having the correct tools to hand.

Are CV boots and grease included when I buy a complete drive shaft?

Yes, when you buy a complete drive shaft from us, it arrives fully assembled with inner and outer CV joints, CV boots, and the correct amount of grease. It is ready to fit straight onto the car upon delivery.