Drive shafts for Volvo C70 2.4 T

Looking for a new drive shaft for your Volvo C70 2.4 T? As driveline specialists, we supply a carefully chosen range of high-quality drive shafts tailored specifically to your car's...

Products for Drive shafts for Volvo C70 2.4 T

21 products
1 - 21 of 21
Item no.:1105044
  • Position: Front left
  • Total length: 505 mm
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • ABS teeth: 48
Item no.:2132084
  • Position: Front right
  • Total length: 955 mm
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • ABS teeth: 48
Item no.:1123828
  • Position: Front left
  • Total length: 526 mm
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • ABS teeth: 48
Item no.:1175528
  • Position: Front left
  • Total length: 580 mm
  • Splines gearbox side: 26
  • Splines wheel side: 26
Item no.:1180295
  • Position: Front left
  • Total length: 580 mm
  • Splines gearbox side: 26
  • Splines wheel side: 26
  • ABS teeth: 48
Item no.:2128535
  • Position: Front right
  • Total length: 1,025 mm
  • Splines gearbox side: 26
  • Splines wheel side: 26
Item no.:2102684
  • Position: Front right
  • Total length: 1,025 mm
  • Splines gearbox side: 26
  • Splines wheel side: 26
  • ABS teeth: 48
Item no.:216884
  • Position: Front right
  • Total length: 947 mm
  • Splines gearbox side: 26
  • Splines wheel side: 36
Item no.:0129060
  • Total length: 630 mm
  • Splines wheel side: 25
Item no.:213989
  • Position: Front right
Item no.:114302
  • Position: Front left
  • Total length: 520 mm
  • Splines gearbox side: 26
  • Splines wheel side: 36
Item no.:219656
  • Total length: 1,002 mm
  • Splines gearbox side: 26
  • Splines wheel side: 36
Item no.:113186
  • Total length: 582 mm
  • Splines gearbox side: 26
  • Splines wheel side: 36
Item no.:2142603
  • Position: Front right
  • Total length: 971 mm
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • ABS teeth: 48
Item no.:1152888
  • Position: Front left
  • Total length: 540 mm
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • ABS teeth: 48
Item no.:2130629
  • Position: Front right
  • Total length: 990 mm
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • ABS teeth: 48
Item no.:118959
  • Total length: 525 mm
  • Splines gearbox side: 26
  • Splines wheel side: 36
Item no.:212174
  • Position: Front right
Item no.:112827
  • Total length: 540 mm
  • Splines gearbox side: 26
  • Splines wheel side: 36
Item no.:219840
  • Total length: 992 mm
  • Splines gearbox side: 26
  • Splines wheel side: 36
Item no.:116494
  • Position: Front left
  • Total length: 522 mm
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • ABS teeth: 48

Drive shafts for Volvo C70 2.4 T

Owning a Volvo C70 2.4 T means appreciating a combination of Scandinavian design and a spirited turbo engine. For this power to reach the road efficiently and safely, a drive shaft in perfect condition is essential. The drive shaft is a critical component in your car's power delivery, and on a model such as the C70, which is often driven with a focus on comfort and performance, these parts are subjected to substantial stress. At CVJoint24, we understand the technical demands of this specific engine variant and supply drive shafts that meet or exceed original equipment specifications. Choosing the right part ensures your car retains its characteristic driving feel while preventing costly secondary damage to the gearbox or suspension. Our range is carefully selected to cover the needs of both coupé and convertible owners of this model.

What does the drive shaft do on a Volvo C70 2.4 T?

The drive shaft on your Volvo C70 2.4 T has the vital task of transferring torque from the gearbox directly to the front wheels. Because the 2.4 T engine produces steady torque from low revs, the driveshaft must be engineered to cope with these forces without flexing or failing. The assembly consists of a shaft bar fitted with two joints: an inner joint at the gearbox and an outer joint at the wheel hub. These joints allow the wheels to move up and down with the suspension and turn when steering, all while transferring power smoothly. On a front-wheel-drive car such as the C70, the drive shafts differ in length between the right and left sides, which is an important technical detail to keep in mind when replacing them. A well-functioning shaft minimises energy loss and guarantees that engine power translates into motion in a smooth, controlled manner.

Common signs of wear

There are several distinct warning signs that a drive shaft on your Volvo C70 2.4 T is beginning to fail. One of the most common symptoms is a clicking or knocking noise that is clearly audible on full steering lock at low speeds, typically indicating wear in the outer CV joint. If you instead experience vibrations through the car under hard acceleration, the inner joint is usually the culprit. Another telltale sign is grease splattered across the inside of the wheel rim or around the wheel arch, caused by a split CV boot. When the boot splits, lubricating grease escapes and dirt enters, rapidly destroying the precision-machined surfaces of the constant velocity joint. Ignoring these symptoms can ultimately cause the shaft to snap, resulting in total loss of drive and leaving you stranded, often at the worst possible moment.

How to choose the correct drive shaft

When it is time to buy a new drive shaft for your Volvo C70 2.4 T, precision is essential. Variations exist depending on whether your car is equipped with a manual or automatic gearbox, as well as its model year. It is crucial to verify the spline count—the number of teeth on the ends of the shaft—and the total length of the component. Certain models also feature integrated ABS rings that must correspond with the vehicle's sensor system to prevent warning lights on the dashboard. To make your selection simple and reliable, select your car's make, model and engine variant in our vehicle selector. This filters for the exact parts verified for your specific vehicle configuration. Matching the original part number or technical specifications ensures hassle-free installation and long service life from your new spare parts, saving you both time and money.

Related parts to inspect

We recommend also checking these exact pages for the same car when working on the drive shaft:

When one drivetrain component shows wear, adjacent parts on the same car often require inspection too. By comparing these exact pages for the Volvo C70 2.4 T, it becomes easier to determine whether the issue lies with the drive shaft itself or with a neighbouring part of the driveline.

This is especially true on models where vibrations, play and unusual noises can shift symptoms between multiple components in the drivetrain. A quick check of related categories reduces the risk of replacing the right type of part while overlooking an adjacent component that contributes to the same problem.

Inspecting these parts at the same time reduces the likelihood of future garage visits and ensures your Volvo remains dependable for many kilometres to come.

Why shop at CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, with our central warehouse located in Helsingborg, Sweden. We have built deep technical expertise around Volvo models, allowing us to supply a product range with exceptional accuracy. When you order from us, you receive high-quality car parts backed by our fitment guarantee—ensuring you get the correct part first time. With our dedication to dependable product quality and knowledgeable customer support, we are the natural choice for discerning motorists across the EU. We offer fast dispatched orders across Europe, helping you get your car back on the road without delay. By combining specialist knowledge with an easy-to-use catalogue and efficient service, we strive to be your trusted partner for all driveline components.

Frequently Asked Questions about Drive Shafts for Volvo C70 2.4 T

How do I know if my Volvo C70 2.4 T needs a new drive shaft?

The most common signs are clicking noises when cornering (outer joint) or vibrations through the chassis during acceleration (inner joint). Leaking grease from a damaged boot is also a clear indication.

Is there a difference between the right and left drive shaft on a C70 2.4 T?

Yes, on this front-wheel-drive model the drive shafts are different lengths. The offside (right) shaft is typically longer because the gearbox is positioned off-centre in the engine bay.

Are CV boots and grease included when I buy a complete drive shaft?

Yes, when you purchase a complete drive shaft from us, it comes fully assembled with inner and outer CV joints, boots, and the correct amount of grease, ready to fit.

Can I replace just the CV joint instead of the entire shaft?

Yes, if the shaft bar itself is undamaged, you can choose to replace just the worn CV joint. We supply both complete driveshafts and individual joints for the Volvo C70 2.4 T.

Why is it important to check the ABS ring during replacement?

Many drive shafts for the C70 have the ABS ring mounted on the outer joint. If the ring is cracked, corroded, or has the incorrect tooth count, the car's ABS and stability control systems will trigger an error light.

How does your fitment guarantee work?

When you select your car's make, model, and engine variant, we filter out the correct parts for your vehicle. In the unlikely event that a part does not fit, we will help you exchange it for the right one without any hassle.