Drive shafts for Volvo S60 2.4 Bifuel

Finding the right drive shaft for your Volvo S60 2.4 Bifuel is crucial for dependable performance and driving safety. As your Swedish driveline specialist, we supply an expertly selected...

Products for Drive shafts for Volvo S60 2.4 Bifuel

9 products
1 - 9 of 9
Item no.:1156372
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 540 mm
  • ABS teeth: 48
Item no.:2119273
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 990 mm
  • ABS teeth: 48
Item no.:2119702
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 977 mm
  • ABS teeth: 48
Item no.:1157559
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 525 mm
  • ABS teeth: 48
Item no.:7318013
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 990 mm
  • ABS teeth: 48
Item no.:1157976
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 36
  • Total length: 535 mm
Item no.:2189126
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 1,005 mm
  • ABS teeth: 48
Item no.:216941
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 987 mm
  • Thread size: M10x1.5
Item no.:119032
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 580 mm
  • Joint diameter: 87 mm

Drive shafts for Volvo S60 2.4 Bifuel

Welcome to our dedicated section for drive shafts for Volvo S60 2.4 Bifuel. This particular model places high demands on its drivetrain to transfer power smoothly from the engine to the wheels, whether you run on gas or petrol. The drive shaft is a vital link in your vehicle's running gear, built to handle both high torque and the daily stresses of the road. We stock a comprehensive selection of drive shafts tailored precisely to the technical specifications of your Volvo S60. With our wide range, we supply solutions that match original equipment quality and satisfy your car's exact requirements.

When you select a drive shaft from us, you can rest assured that each component is built to withstand harsh European winters and varied road conditions. We understand the importance of preserving your car's original handling characteristics, which is why we focus exclusively on high-precision, hard-wearing parts. Investing in the correct drive shaft extends the working life of your entire Volvo S60 2.4 Bifuel and guarantees a smooth, vibration-free ride.

What does the drive shaft do on a Volvo S60 2.4 Bifuel?

The drive shaft on a Volvo S60 2.4 Bifuel has the fundamental task of transmitting torque from the engine and gearbox directly to the front wheels. Because the S60 is a front-wheel-drive saloon, the drive shafts carry full responsibility for both propulsion and steering angle changes. Each shaft consists of a sturdy steel bar fitted with two joints: an inner joint that connects to the gearbox and an outer joint seated at the wheel hub. These constant velocity joints allow the shaft to rotate at a constant speed while the wheels travel up and down with the suspension and pivot as you steer.

On a Bifuel model, seamless and efficient power delivery is especially important. The driveshaft must cope effortlessly with the rapid torque transitions that occur during acceleration. Beyond transmitting power, the drive shaft acts as a stabilising element within the chassis geometry. A properly functioning shaft minimises mechanical energy losses and supports lower fuel consumption, aligning perfectly with the Bifuel philosophy of environmental care and efficiency. If a shaft bends or its joints wear out, your vehicle's overall balance and driving safety suffer.

Common signs of wear

Several distinct symptoms indicate that a drive shaft on your Volvo S60 2.4 Bifuel is worn or damaged. One of the most typical signs is a distinct clicking or knocking noise when turning on full lock, such as when parking or taking tight bends. This sound usually originates from the outer CV joint, where the internal ball bearings develop play because of wear or grease starvation. If you notice vibrations through the steering wheel or the cabin during acceleration, the inner CV joint is typically the cause.

Another clear warning sign is grease splattered over the inside of the wheel rim or around the wheel arch. This almost always points to a split CV boot. When the boot tears, essential lubricating grease escapes, allowing road grit, water and salt to penetrate the joint. This accelerates wear drastically and can cause sudden joint failure if neglected. We strongly advise inspecting the boots regularly to avoid having to replace the entire drive shaft prematurely.

Choosing the right drive shaft

Selecting the correct drive shaft for your Volvo S60 2.4 Bifuel requires attention to detail. Technical specifications can vary depending on the model year and whether your car has a manual or an automatic gearbox. It is crucial to verify the spline count on both the inner and outer ends of the shaft, as well as the overall shaft length. The presence and type of an ABS ring on the outer joint is equally critical, as it sends rotational signals to the braking system. Fitting a shaft without the correct ABS configuration will trigger warning lamps and disable your vehicle's safety systems.

To make choosing simple and accurate, select your vehicle's make, model and engine in our store. Filtering by your exact vehicle details presents only the components engineered to fit your specific car. This prevents ordering errors and ensures an exact fit straight out of the box. Keep in mind that replacing drive shafts in pairs is often sensible if both sides have covered identical mileage, as wear tends to occur evenly across both sides.

Related parts to inspect

We recommend checking these exact pages for the same vehicle when working on your drive shaft:

When one drivetrain component shows signs of wear, nearby parts on the vehicle often require inspection as well. Comparing these exact pages for the Volvo S60 2.4 Bifuel makes it easy to confirm whether an issue lies with the drive shaft itself or another related part of the driveline.

This is especially important on models where vibrations, play and mechanical noises can travel between several drivetrain components. A quick look at related categories reduces the risk of replacing one correct part while overlooking an adjacent component that causes the same symptoms.

When servicing the drive shaft on your Volvo S60, it is the ideal time to inspect adjacent drivetrain assemblies. Often, drive shaft play can induce secondary wear, or other parts may simply be worn after many kilometres on the road. Pay close attention to the wheel bearings, as a worn shaft creates vibrations that accelerate bearing failure. It is also wise to ensure the ABS sensor is clean and undamaged, situated right beside the outer shaft assembly.

Here are the key related categories for your Volvo S60 2.4 Bifuel:

  • Volvo S60 2.4 Bifuel – Main category for your vehicle's drivetrain
  • Outer CV joints for Volvo S60 2.4 Bifuel – If only the outer joint is damaged
  • Inner CV joints for Volvo S60 2.4 Bifuel – For curing vibrations during acceleration
  • ABS rings for Volvo S60 2.4 Bifuel – For resolving ABS fault codes
Inspecting these components simultaneously saves both workshop time and labour costs. A complete, fully sound drivetrain is essential to maintaining the renowned comfort and safety of your Volvo.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist with its central warehouse in Helsingborg, Sweden. We have developed deep technical expertise and an extensive inventory to deliver the right components even for specific vehicle versions like the Volvo S60 2.4 Bifuel. Our commitment centres on superior product quality paired with dependable customer support and technical knowledge. By choosing your car's make, model and engine, you can order with absolute confidence that your parts will fit accurately.

We dispatch quickly across the European Union to keep your car's time off the road to an absolute minimum. We understand that a vehicle out of action disrupts your routine, so we streamline our logistics for prompt delivery. Choosing CVJoint24 means you do not merely receive a spare part; you partner with driveline specialists committed to your car's performance. The right part, supplied directly by driveline professionals – that is our commitment to you.

Frequently asked questions about drive shafts for Volvo S60 2.4 Bifuel

How do I know that the drive shaft fits my Volvo S60 2.4 Bifuel?

The easiest and most reliable way is to select your car's make, model and engine variant in our search filter. This filters our range so you only see the drive shafts that are technically verified for your specific car.

Is there a difference between the drive shaft for manual and automatic gearboxes?

Yes, there can be differences in both length and spline count depending on which gearbox your Volvo S60 2.4 Bifuel is fitted with. Always check the specifications or select your vehicle details to get the correct version.

Why does my car vibrate under acceleration but not at a constant speed?

This is a classic symptom of a worn inner CV joint. When you accelerate, the joint is put under the greatest load, and any play will cause vibrations that transmit right through the car.

Are CV joints and boots included when I buy a complete drive shaft?

Yes, when you buy a complete drive shaft from us, it is delivered fully assembled with both the inner and outer CV joint, as well as CV boots and grease. It is a convenient solution for a quick replacement.

Do I have to replace both drive shafts at the same time?

It is not strictly necessary, but often recommended. If one driveshaft has worn out, the other has usually covered the same distance under identical conditions and will likely need replacing before long.

What happens if the ABS ring on the new drive shaft has the wrong number of teeth?

If the number of teeth on the ABS ring does not match the car's sensor, the ABS system will trigger a fault warning and stop working. It is therefore crucial to choose a shaft with the exact right specification.