Drive shafts for Volvo S60 T5 AWD

Looking for a high-quality Drive shafts for Volvo S60 T5 AWD? As driveline specialists, we supply precision-engineered components that ensure optimal power delivery for your...

Products for Drive shafts for Volvo S60 T5 AWD

4 products
1 - 4 of 4
Item no.:1139460
  • Position: Front left
  • Total length: 600 mm
  • Splines gearbox side: 31
  • Splines wheel side: 40
Item no.:1115246
  • Position: Front left
  • Total length: 539 mm
  • Splines gearbox side: 31
  • Splines wheel side: 40
Item no.:6182320
  • Position: Rear left, Rear right
  • Total length: 760 mm
  • Splines gearbox side: 23
  • Splines wheel side: 36
  • ABS teeth: 44
Item no.:218734
  • Position: Front right
  • Total length: 1,010 mm
  • Splines gearbox side: 28
  • Splines wheel side: 40

Drive shafts for Volvo S60 T5 AWD

Finding the correct drive shaft for a Volvo S60 T5 AWD demands precision and technical understanding. Because the four-wheel-drive T5 variant places heavy demands on power delivery, it is critical that the component is dimensioned to handle both the engine torque and the specific angles found in an AWD configuration. At CVJoint24, we specialise in precisely these drivetrain components. A Volvo S60 in this specification uses unique drive shafts compared to front-wheel-drive versions, particularly regarding the rear shafts and how the front shafts integrate with the angle gear. We supply parts that are technically matched to replace original equipment without complications.

By choosing a vehicle-specific solution, you ensure that the car's handling and safety systems, such as stability control and AWD responsiveness, remain at the exact standard intended by Volvo. Our range covers the specific requirements of this performance model, whether you need the left or right side, front or rear. We work exclusively with components built to withstand the high stresses that a turbocharged engine paired with all-wheel drive exerts on the drivetrain.

What does a drive shaft do on a Volvo S60 T5 AWD?

The drive shaft on a Volvo S60 T5 AWD has the crucial job of transferring rotational power from the gearbox and differentials out to the road wheels. In an all-wheel-drive car such as the S60 T5, this system is more complex than in a standard vehicle. Torque is distributed between the front and rear axles, meaning every individual driveshaft must operate in perfect harmony with the car's AWD coupling. A drive shaft consists of the shaft bar itself alongside inner and outer CV joints, which allow the wheels to move up and down with the suspension and steer at the front axle.

For the spirited T5 engine, renowned for its strong torque delivery, these components undergo substantial stress during hard acceleration. A properly functioning drive shaft minimises drivetrain losses and ensures power reaches the tarmac smoothly and without vibration. If a shaft is unbalanced or the joints are worn, it degrades not only ride comfort but also the service life of neighbouring parts like wheel bearings and differential seals. Maintaining driveshaft integrity is therefore vital for your vehicle's overall reliability.

Common signs of wear

There are several clear warning signs indicating that a drive shaft on your Volvo S60 T5 AWD is beginning to fail. One of the most typical symptoms is vibrations felt through the steering wheel or chassis under acceleration. This often stems from wear inside the inner constant velocity joint, creating play that travels throughout the drivetrain. If you hear clicking or knocking noises on full steering lock at low speeds instead, this is a classic symptom of a worn outer CV joint that requires prompt attention.

You should also regularly inspect the CV boots. If a boot tears, lubricating grease escapes and dirt enters, quickly destroying the CV joint from the inside. On an AWD car, you must also listen for noises coming from the centre or rear of the vehicle, as this can point to issues with the rear drive shafts or the propeller shaft. Ignoring these warning signs can lead to complete component failure, leaving you stranded with no drive—which can be dangerous and costly on motorways.

Choosing the right drive shaft

When purchasing a replacement drive shaft for your Volvo S60 T5 AWD, checking exact technical specifications is essential. Knowing the model and year alone is not always enough, as factors such as gearbox type and specific chassis number can alter shaft length and spline counts at each end. At CVJoint24, we simplify this process: simply select your car by make, model and engine to find the drive shafts that are technically compatible with your vehicle's exact setup.

Always check whether the shaft is supplied complete with joints and boots, which is typically the most cost-effective and dependable option when replacing parts. Another important detail for S60 owners is verifying whether the car has ABS rings fitted directly to the drive shaft or reads vehicle speed through magnetic wheel bearings, as this varies across production runs. By ordering from our shop, you ensure you get a component matching original specifications down to the finest detail, preventing wrong orders and unnecessary returns.

Related parts to check

Make sure to inspect these exact pages for the same car when working on your drive shaft:

When one drivetrain component shows signs of wear, related parts on the same car often warrant inspection too. By comparing these dedicated pages for the Volvo S60 T5 AWD, you can more easily determine whether a fault lies within the drive shaft itself or in an adjacent section of the drivetrain.

This is especially important on models where vibrations, play and unusual noises can easily transfer across different driveline components. Checking related categories reduces the risk of replacing one correct part while overlooking an adjacent component that contributes to the very same issue.

Inspecting these components while the drive shaft is already removed will save you both time and labour costs down the line. Garage labour is usually the largest expense, so renewing a split CV boot or a worn CV joint while the suspension is disassembled represents a sound long-term investment.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, supplying high-quality drivetrain components across the European Union from our central warehouse in Helsingborg, Sweden. We understand that exact fitment is paramount on sophisticated models like the Volvo S60 T5 AWD. That is why we provide a dedicated fitment guarantee, giving you complete confidence that the parts you order will fit your car perfectly. With deep product expertise and focused stock, we ensure fast, reliable delivery straight to your doorstep.

Our goal is to help you select the right part first time, avoiding costly workshop delays and returns. When buying from CVJoint24, you receive not just a spare part, but access to expert driveline know-how to keep your Volvo running with maximum reliability. We are committed to supplying high-grade parts at fair prices backed by specialist customer support. Because we specialise exclusively in drivetrain components, we regularly stock parts that general car parts retailers cannot supply.

Frequently Asked Questions about Drive Shafts for Volvo S60 T5 AWD

How do I know if the drive shaft fits my Volvo S60 T5 AWD?

The easiest and most reliable method is to select your car's make, model, and engine variant in our search filter. Because the T5 AWD has specific requirements for length and spline count, our catalogue filters out the exact drive shafts approved for your vehicle's specific specification.

Is there a difference between the front and rear drive shafts on the S60 AWD?

Yes, there is a substantial difference in length, design, and mounting fittings between the front and rear drive shafts. The front shafts must also accommodate steering angles, whereas the rear shafts have a more fixed geometry.

Can I replace just the CV joint instead of the entire drive shaft?

Yes, provided the shaft bar itself is undamaged, you can replace either the inner or outer CV joint separately. We supply both complete drive shafts and individual CV joints so you can choose the most cost-effective solution.

Why does my Volvo S60 T5 AWD vibrate during acceleration?

Vibration under load is very often caused by wear in the inner CV joint. When the joint wears out, radial play develops, creating an imbalance throughout the drivetrain during power delivery.

Are CV boots and grease included when I purchase a complete drive shaft?

Yes, our complete drive shafts arrive fully assembled with CV boots, grease, and all necessary fitting accessories so you can proceed with installation straight out of the box.

How quickly can I have my new drive shaft delivered?

We offer prompt dispatch on the vast majority of our stocked items. If you order in good time on a working day, your drive shaft is normally dispatched the same day for the fastest possible turnaround across the EU.