Drive shafts for Volvo V60 2.0 T

Looking for a model-specific drive shaft for your Volvo V60 2.0 T? As driveline specialists, we supply a carefully chosen range of drive shafts engineered to meet the demanding...

Products for Drive shafts for Volvo V60 2.0 T

14 products
1 - 14 of 14
Item no.:2176096
  • Position: Front right
  • Total length: 953 mm
  • Splines gearbox side: 26
  • Splines wheel side: 40
Item no.:2112092
  • Position: Front right
  • Total length: 952 mm
  • Splines gearbox side: 28
  • Splines wheel side: 40
Item no.:2150768
  • Position: Front right
  • Total length: 952 mm
  • Splines gearbox side: 26
  • Splines wheel side: 40
Item no.:1101840
  • Position: Front left
  • Total length: 604 mm
  • Splines gearbox side: 26
  • Splines wheel side: 40
Item no.:1139206
  • Position: Front left
  • Total length: 594 mm
  • Splines gearbox side: 28
  • Splines wheel side: 40
Item no.:214836
  • Position: Front right
  • Total length: 1,000 mm
  • Splines gearbox side: 26
  • Splines wheel side: 40
Item no.:110113
  • Position: Front left
  • Total length: 526 mm
  • Splines gearbox side: 31
  • Splines wheel side: 40
Item no.:216431
  • Position: Front right
  • Total length: 947 mm
  • Splines gearbox side: 26
  • Splines wheel side: 36
Item no.:217331
  • Position: Front right
  • Total length: 990 mm
  • Splines gearbox side: 28
  • Splines wheel side: 40
Item no.:116156
  • Position: Front left
  • Total length: 604 mm
  • Splines gearbox side: 26
  • Splines wheel side: 40
Item no.:2130808
  • Position: Front right
  • Total length: 952 mm
  • Splines gearbox side: 26
  • Splines wheel side: 40
Item no.:119793
  • Total length: 555 mm
  • Splines gearbox side: 26
  • Splines wheel side: 40
Item no.:111276
  • Total length: 582 mm
  • Splines gearbox side: 26
  • Splines wheel side: 36
Item no.:112363
  • Total length: 595 mm
  • Splines gearbox side: 28
  • Splines wheel side: 40

Drive shafts for Volvo V60 2.0 T

The Volvo V60 2.0 T is a car that combines performance with comfort, and maintaining these qualities requires a drivetrain in peak condition. The drive shaft is a vital link in this system, having to handle substantial forces every time you press the accelerator. On this page, you will find drive shafts engineered specifically to withstand the torque and loads generated by the turbocharged 2.0 T engine. With 14 matched products in our range, we cover most requirements for this specific model variant, whether you need the left-hand or right-hand side.

It is crucial not to compromise on quality when it comes to power transmission. An incorrect or worn driveshaft can cause secondary damage to both the gearbox and suspension, which can quickly become costly. We help you find the right component quickly and easily through our expertise. Every drive shaft in our catalogue is tested to meet the exact technical specifications required for the Volvo V60, ensuring a long service life and dependable operation in all driving conditions.

What does a drive shaft do on a Volvo V60 2.0 T?

The drive shaft on your Volvo V60 2.0 T transfers the engine's power from the gearbox to the driven wheels. Because the V60 is a modern car with a sophisticated suspension setup, the drive shaft must cope with both suspension travel and steering angles while rotating at high speeds. This is made possible by the inner and outer CV joints fitted at each end of the shaft. These joints allow the shaft to articulate without interrupting power delivery or generating vibrations.

For the 2.0 T variant, precision in these components is especially important. The turbocharged engine delivers power smoothly yet forcefully, placing high demands on the shaft's torsional stiffness and joint durability. Without a properly functioning drive shaft, the car simply cannot move, as no power reaches the road. The driveshaft also acts as an essential safety component; it is designed to withstand the extreme stresses of hard acceleration and sharp braking without twisting or failing.

Common signs of wear

There are several distinct warning signs indicating that a drive shaft on your Volvo V60 is failing. One of the most typical symptoms is a clicking or knocking noise when taking sharp turns at low speeds. This noise usually points to wear in the outer CV joint, where the bearings have developed play within their tracks. If you instead feel vibrations through the steering wheel or the car's chassis under acceleration, the inner CV joint may be worn or out of balance.

Another critical indicator is a split or loose CV boot. The boot protects the joint by retaining lubricating grease and sealing out dirt and water. If the grease escapes, the constant velocity joint deteriorates rapidly due to friction and corrosion. Ignoring these warning signs can result in complete failure where the shaft snaps or binds, which can be dangerous at higher speeds. Regular inspection of the drive shaft boots is therefore inexpensive insurance against major breakdowns.

How to choose the correct drive shaft

Selecting the correct drive shaft for your Volvo V60 2.0 T may seem daunting, as variations exist depending on the gearbox type and production year. The shafts differ primarily in overall length, the number of splines (teeth) on each end, and whether the shaft is equipped with a specific ABS ring. Even a discrepancy of a few millimetres can prevent proper fitment or introduce vibrations after installation. It is therefore vital to match your car's exact specifications.

To avoid ordering the wrong part, simply select your car's correct make, model and engine variant in our catalogue. This filters out the components guaranteed to fit your vehicle. Always double-check whether you need to replace the left-hand or right-hand side, as they are rarely identical on the Volvo V60. Choosing a complete drive shaft rather than replacing an individual joint often saves valuable workshop time, providing you with a complete assembly featuring fresh boots and joints at both ends.

Related components to check

Be sure to inspect these exact pages for the same vehicle when working on the drive shaft:

When one drivetrain component shows signs of wear, nearby parts on the same car often require attention as well. By checking these corresponding pages for the Volvo V60 2.0 T, it is easier to determine whether the fault lies strictly with the drive shaft or with another adjacent part of the drivetrain.

This is particularly relevant on models where vibrations, play and unusual noises can transfer symptoms across multiple parts in the driveline. A quick check of related categories reduces the risk of replacing the correct component type while overlooking a neighbouring part that causes the same symptom.

By inspecting the entire assembly and its mountings, you ensure a durable repair and avoid repeating the job shortly afterwards. We also recommend checking the wheel bearings and ball joints while the shaft is removed, as they are easily accessible at this stage.

Why shop with CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, with our central warehouse located in Helsingborg, Sweden. We understand how essential it is to get the correct part for your Volvo V60 2.0 T the first time, which is why we provide an accurate fitment guarantee. Our range features exceptional depth backed by high technical knowledge, allowing us to supply parts that meet or exceed original equipment standards. With stock held in Sweden, we ship efficiently across the EU to keep turnaround times short.

When you choose us, you receive high-quality spare parts alongside the reassurance of buying from true drivetrain experts. We make finding the right part straightforward using our detailed technical catalogue and clear product descriptions. By getting your parts delivered promptly, you can minimise vehicle downtime in the garage. With CVJoint24, you will always find the right car parts at the right price, combined with the specialist know-how needed to keep your Volvo driving safely.

Frequently Asked Questions about Drive Shafts for Volvo V60 2.0 T

Do all drive shafts fit the Volvo V60 2.0 T?

No, there are variations depending on the gearbox and model year. Always filter by your car's make, model, year and engine variant to find the exact drive shaft for your vehicle.

How do I know whether the right or left drive shaft is damaged?

Vibrations or noises typically come from the side under the most load. Turning left puts more load on the right shaft, and vice versa. A visual inspection of the CV boots can also reveal grease leaks on the defective side.

Can I replace just the CV joint instead of the entire drive shaft?

Yes, if the shaft bar itself is undamaged, you can replace just the inner or outer CV joint. This is often a more cost-effective option if only one part is worn.

What are the most common symptoms of a worn drive shaft on a V60?

The most common signs are clicking noises on full steering lock, vibrations under acceleration, and grease splattered on the inside of the wheel rim from a split CV boot.

Do I need special tools to replace the drive shaft on my Volvo?

You generally need suitable sockets for the hub bolt or nut, along with standard tools to release the control arms or suspension strut. A torque wrench is essential to tighten the hub bolt to Volvo's specified torque.

Are boots and grease included when I buy a new drive shaft?

Yes, when you purchase a complete drive shaft from us, it comes fully assembled with new CV boots, joints, and the correct amount of grease, ready for direct installation.