Drive shafts for Volvo V70 2.0 Turbo

Looking for a replacement drive shaft for your Volvo V70 2.0 Turbo? As a dedicated Swedish driveline specialist, we supply a carefully chosen range engineered specifically for this...

Products for Drive shafts for Volvo V70 2.0 Turbo

16 products
1 - 16 of 16
Item no.:1122508
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 26
  • Total length: 580 mm
Item no.:1154076
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 26
  • Total length: 580 mm
  • ABS teeth: 48
Item no.:2139287
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 26
  • Total length: 1,025 mm
  • Joint diameter: 90 mm
Item no.:2186026
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 26
  • Total length: 1,025 mm
  • ABS teeth: 48
Item no.:1130960
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 526 mm
  • ABS teeth: 48
Item no.:2121332
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 971 mm
  • ABS teeth: 48
Item no.:0137504
  • Position: Front left
  • Splines wheel side: 25
  • Total length: 630 mm
  • Joint diameter: 86 mm
  • ABS teeth: 43
Item no.:116633
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 580 mm
  • Joint diameter: 87 mm
Item no.:117168
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 506 mm
  • ABS teeth: 48
Item no.:7317940
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 26
  • Total length: 578 mm
  • Joint diameter: 98 mm
Item no.:2180482
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 26
  • Total length: 1,030 mm
  • Joint diameter: 98 mm
Item no.:1155394
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 26
  • Total length: 579 mm
  • ABS teeth: 48
Item no.:2149539
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 26
  • Total length: 1,030 mm
  • ABS teeth: 48
Item no.:212083
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 1,005 mm
  • ABS teeth: 48
Item no.:1172235
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 36
  • Total length: 535 mm
Item no.:212278
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 987 mm
  • Thread size: M10x1.5

Drive shafts for Volvo V70 2.0 Turbo

The Volvo V70 2.0 Turbo is a powerful machine that places demanding requirements on its power transmission. The drive shaft is the critical link transferring torque from the engine and gearbox out to the road wheels. For a turbocharged engine, the stresses under acceleration are considerable, making material choice and manufacturing precision absolutely vital. With us, you will find drive shafts specifically tailored to handle the forces generated by the 2.0 Turbo engine. We understand that your Volvo is more than mere transport; it is an investment in safety and comfort. That is why we only offer components that meet or exceed original specifications. Choosing the right part from the outset reduces the risk of future breakdowns and ensures the car retains its driving characteristics for many thousands of kilometres to come.

What does a drive shaft do on the Volvo V70 2.0 Turbo?

On a front-wheel-drive Volvo V70 2.0 Turbo, the drive shaft has a complex task. It must not only transmit power, but also allow the wheels to move up and down with the suspension and turn with the steering. This is made possible by the inner and outer CV joints fitted at either end of the shaft. The inner joint accommodates the axial plunge movements that occur as the car travels over bumps, whilst the outer joint permits the large articulation angles required at full steering lock. For the 2.0 Turbo model, it is especially important that these components are dimensioned for the higher torque output compared to naturally aspirated engines. A properly functioning driveshaft guarantees smooth, vibration-free power delivery, which is fundamental to the premium feel for which the Volvo V70 is renowned.

Common signs of wear

Several clear warning signs indicate that a drive shaft on your Volvo V70 2.0 Turbo is nearing the end of its service life. One of the most common symptoms is a clicking or knocking noise heard when making sharp turns at low speed, which typically points to wear in the outer CV joint. If you instead experience vibrations through the steering wheel or the entire body shell under acceleration, the inner joint is frequently the culprit. It is also important to watch out for grease splattered on the inside of the wheel rim or around the wheel arch, which indicates a split CV boot. If the grease escapes and road dirt enters, the constant velocity joint deteriorates rapidly. Ignoring these signs can eventually lead to complete shaft failure, resulting in a total loss of drive.

How to choose the correct drive shaft

Identifying the exact drive shaft for your Volvo V70 2.0 Turbo can be tricky, as variations exist depending on gearbox type (manual or automatic) and model year. It is not unusual for shaft lengths or spline counts (the teeth at each end) to differ. To ensure you select the correct part straight away, we always recommend selecting your car by its exact make, model and engine variant. This filters out any parts not technically compatible with your specific configuration. Also check whether it is the left- or right-hand side that requires replacement, as these are rarely identical on the Volvo V70. Taking care during the selection process saves both time and money, avoiding the headache of a dismantled car and a replacement that does not fit.

Related parts to check

Be sure to check these dedicated pages for the same vehicle when working on the drive shaft:

When a drivetrain component exhibits wear, surrounding parts on the same car often warrant inspection too. By checking these exact pages for the Volvo V70 2.0 Turbo, it becomes easier to determine whether the issue lies with the drive shaft itself or with another adjacent part of the drivetrain.

This is particularly relevant on models where vibrations, play and unusual noises can transfer symptoms across several parts in the same driveline. A quick check of related categories reduces the risk of replacing the right type of component whilst overlooking an adjacent part affecting the very same fault.

Replacing a damaged ABS ring or a perished drive shaft boot whilst the shaft is removed provides cost-effective peace of mind against future problems.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, dispatching orders across the EU from our warehouse in Helsingborg, Sweden. We focus exclusively on power transmission, giving us profound technical expertise that general motor factors often lack. For your Volvo V70 2.0 Turbo, this means access to spare parts offering an accurate fit and premium quality. By selecting your exact model and engine configuration, you can order with absolute confidence. With our warehouse centrally located in Sweden, we ship quickly across Europe so your vehicle is off the road for no longer than necessary. Our mission is to deliver the market's best combination of specialist knowledge, comprehensive range and competitive pricing. Buying from us means choosing a partner who understands the importance of a dependable drivetrain and always prioritises your needs as a driver.

Frequently Asked Questions about Drive Shafts for Volvo V70 2.0 Turbo

How do I know if the drive shaft fits my Volvo V70 2.0 Turbo?

The most reliable way is to select your vehicle make, model and engine variant in our search filter. This will display only the drive shafts that are technically verified to fit your specific car.

What are the most common symptoms of a failing drive shaft?

The most common signs are clicking noises when cornering (outer CV joint) or vibrations through the car under acceleration (inner CV joint). Grease leaking from a split CV boot is also a clear warning sign.

Is there a difference between drive shafts for manual and automatic gearboxes?

Yes, on the Volvo V70 2.0 Turbo, the length and spline count often differ depending on the gearbox fitted to the car. Always check the specifications carefully.

Do I need to replace both drive shafts at the same time?

No, it is not necessary to replace both sides if only one is worn or damaged. However, it is sensible to inspect the CV boots on the opposite side whilst the car is raised.

What is included when I buy a complete drive shaft from you?

Our complete drive shafts are supplied with both inner and outer CV joints as well as CV boots pre-fitted, ready for direct installation on your Volvo.

Why is it important to check the ABS ring during replacement?

The ABS ring is often mounted on the outer CV joint. If it is cracked or corroded, it can trigger fault codes and prevent the ABS system from functioning correctly.