Drive shafts for Volvo V70 2.4 Turbo

Need a premium replacement drive shaft for your Volvo V70 2.4 Turbo? As Swedish driveline specialists, we supply a precision-engineered range tailored to this high-torque petrol model....

Products for Drive shafts for Volvo V70 2.4 Turbo

25 products
1 - 24 of 25
Item no.:1151672
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 26
  • Total length: 580 mm
Item no.:1116621
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 26
  • Total length: 580 mm
  • ABS teeth: 48
Item no.:1123453
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 540 mm
  • ABS teeth: 48
Item no.:2107408
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 26
  • Total length: 1,025 mm
  • Joint diameter: 90 mm
Item no.:2167763
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 26
  • Total length: 1,025 mm
  • ABS teeth: 48
Item no.:2121383
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 977 mm
  • ABS teeth: 48
Item no.:2151382
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 990 mm
  • ABS teeth: 48
Item no.:1189347
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 526 mm
  • ABS teeth: 48
Item no.:7318024
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 971 mm
  • ABS teeth: 48
Item no.:1116356
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 580 mm
  • Joint diameter: 87 mm
Item no.:110599
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 525 mm
  • ABS teeth: 48
Item no.:119295
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 505 mm
  • ABS teeth: 48
Item no.:0194717
  • Position: Front left
  • Splines wheel side: 25
  • Total length: 630 mm
  • Joint diameter: 86 mm
  • ABS teeth: 43
Item no.:7317932
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 26
  • Total length: 578 mm
  • Joint diameter: 98 mm
Item no.:2179049
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 26
  • Total length: 1,030 mm
  • Joint diameter: 98 mm
Item no.:1158666
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 26
  • Total length: 579 mm
  • ABS teeth: 48
Item no.:2188163
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 26
  • Total length: 1,030 mm
  • ABS teeth: 48
Item no.:1126157
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 26
  • Total length: 579 mm
  • ABS teeth: 48
Item no.:2191767
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 26
  • Total length: 1,052 mm
  • ABS teeth: 48
Item no.:2107816
  • Position: Front right
  • ABS teeth: 48
Item no.:1116785
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 26
  • Total length: 603 mm
  • ABS teeth: 48
Item no.:2151007
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 26
  • Total length: 1,054 mm
  • ABS teeth: 48
Item no.:1155833
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 36
  • Total length: 535 mm
Item no.:2177246
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 1,005 mm
  • ABS teeth: 48
Showing 1–24 of 25 products

Drive shafts for Volvo V70 2.4 Turbo

The Volvo V70 is one of Sweden's most iconic vehicle models, and the 2.4 Turbo variant pairs everyday practicality with a powerful driving experience. Maintaining this performance demands a drivetrain in first-class condition. The drive shaft is a critical link in this setup, responsible for transmitting the engine's power to the driven wheels across all conditions. At CVJoint24, we understand the exacting demands of the Volvo V70 2.4 Turbo, where the turbocharged engine's torque requires exceptional material strength and precision. We stock a comprehensive selection of drive shafts engineered to meet or exceed original equipment specifications, guaranteeing durability and optimum ride comfort for your car. Investing in a quality-assured drive shaft is essential to prevent unnecessary wear on both the gearbox and suspension.

What does the drive shaft do on a Volvo V70 2.4 Turbo?

The primary task of a drive shaft on a front-wheel-drive car such as the Volvo V70 2.4 Turbo is transferring rotational torque from the gearbox to the front wheels. Because the front wheels steer as well as propel the vehicle, the drive shaft must cope with sharp articulation angles while spinning at high speeds. On the 2.4 Turbo, this is especially vital because the engine delivers substantial low-end torque, placing the shaft's joints under severe load. A complete driveshaft consists of an axle bar with an inner and outer CV joint, protected by flexible rubber boots. These components work together to deliver smooth power transfer whether accelerating hard on the motorway or negotiating tight city turns. Without an operational drive shaft, engine power cannot reach the road, making it one of the car's most critical assemblies.

Common signs of wear

Several distinct symptoms indicate that a drive shaft on your Volvo V70 is becoming worn or damaged. One of the most frequent signs is a rhythmic clicking or knocking noise clearly audible when cornering, which usually points to a worn outer constant velocity joint. If you experience vibrations through the steering wheel or body shell during acceleration instead, play has often developed in the inner CV joint. Another telltale warning sign is grease splattered over the inside of the wheel rim or wheel arch lining; this is almost invariably caused by a split CV boot. When a boot tears, dirt and road moisture penetrate the joint while essential lubricating grease escapes, quickly causing complete joint failure. Ignoring these warning signs can ultimately snap the drive shaft, leaving your vehicle stranded.

How to choose the correct drive shaft

Selecting the right drive shaft for a Volvo V70 2.4 Turbo requires precision, as specifications vary significantly across model years and gearbox types. There are substantial differences between shafts designed for manual transmissions and automatic gearboxes, affecting overall shaft length as well as the spline count on each end. Furthermore, the left-hand and right-hand shafts differ in length due to the offset positioning of the gearbox in the engine bay. To ensure an exact fit, we recommend selecting your vehicle by make, model and engine variant in our catalogue. This filters out incorrect items and displays parts tailored to your specific vehicle configuration. Also check whether your car is equipped with ABS, as replacement shafts often include a pre-fitted ABS ring that must match your vehicle's wheel speed sensors to avoid fault codes.

Related parts to inspect

Take a moment to check these exact pages for the same vehicle when working on the drive shaft:

When one drivetrain component exhibits wear, adjoining parts on the same car frequently require inspection too. By comparing these exact pages for the Volvo V70 2.4 Turbo, it is simpler to determine whether a fault lies purely in the drive shaft or in an adjacent section of the power delivery system.

This is particularly relevant on models where vibrations, mechanical play and unusual noises can translate across several connected driveline components. Checking related categories minimises the risk of replacing one correct part while overlooking an adjacent component that contributes to the very same issue.

By inspecting these components alongside the shaft, you ensure that the entire driveline operates seamlessly and that your Volvo remains dependable for thousands of kilometres ahead.

Why shop with CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist, dedicated specifically to drivetrain and power transmission components. We focus exclusively on this field, giving us deep technical expertise and an extensive inventory few general motor factors can match. When you order a drive shaft for your Volvo V70 2.4 Turbo from us, you receive a precision-engineered car part backed by our accurate fitment guarantee. We dispatch stock directly from our Swedish warehouse to customers across Europe, helping both garages and DIY mechanics complete driveline repairs without needless delay. Our commitment is always to provide high-quality spare parts at fair prices, combined with knowledgeable technical support you can rely on.

Frequently asked questions about drive shafts for Volvo V70 2.4 Turbo

How do I know if my Volvo V70 2.4 Turbo needs a new drive shaft?

The most common signs are clicking noises when turning (outer CV joint) or vibrations during acceleration (inner CV joint). If you spot grease leaking from a damaged CV boot, the shaft should be inspected immediately.

Is there a difference between drive shafts for manual and automatic gearboxes?

Yes, there are often major differences in both length and splines between manual and automatic gearboxes on the Volvo V70 2.4 Turbo. Always select your exact make, model and engine variant to find the correct version.

Can I replace just the CV joint instead of the entire drive shaft?

Yes, if the shaft bar itself is undamaged, you can replace just the inner or outer CV joint. This is often a more cost-effective option if only one joint is worn.

Does the same drive shaft fit both the right and left sides?

No, on the Volvo V70 2.4 Turbo, the drive shafts are usually different lengths on the right and left sides due to the asymmetrical placement of the gearbox.

Is an ABS ring included when I buy a complete drive shaft?

Most complete drive shafts for the Volvo V70 are supplied with a pre-fitted ABS ring, but it is important to check the specification for the specific item you choose.

What does the fitment guarantee at CVJoint24 mean?

It means that if you specify your car's exact make, model and engine details and we confirm the part, we guarantee that it fits your car. This gives you complete peace of mind when making your purchase.