Fiat Panda

Spare parts and drivetrain components for the Fiat Panda.

Products for Fiat Panda

89 products
1 - 24 of 89
Item no.:149878
  • Position: Inner
  • Splines gearbox side: 22
  • Splines wheel side: 20
Item no.:1151642
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 595 mm
  • Joint diameter: 73 mm
Item no.:2158612
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 759 mm
  • Joint diameter: 76 mm
Item no.:7301486
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 822 mm
  • Joint diameter: 73 mm
Item no.:0234725
  • Total length: 1,729,5 mm
  • Number of joints: 3
  • Outer diameter 1: 86 mm
  • Bolt circle diameter 1: 74 mm
  • Outer diameter 2: 86 mm
Item no.:0511207
  • Position: Outer
  • Inner splines: 22
  • Seal diameter: 51 mm
  • Outer splines: 25
  • Thread size: M24X1,5
Item no.:0604115
  • Outer diameter: 22 mm
  • Diameter: 78 mm
Item no.:411970
  • Position: Rear left
  • Splines wheel side: 22
  • Total length: 613 mm
  • Diameter 1: 72 mm
  • Diameter 2: 127 mm
Item no.:515456
  • Position: Rear right
  • Splines wheel side: 22
  • Total length: 622 mm
  • Diameter 1: 72 mm
  • Diameter 2: 127 mm
Item no.:1102113
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 669 mm
Item no.:2110124
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 918 mm
  • Joint diameter: 79 mm
Item no.:111433
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 611 mm
  • Joint diameter: 76 mm
  • Joint diameter, gearbox side: 73 mm
Item no.:118325
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 522 mm
  • Joint diameter: 79 mm
  • Diameter 1: 79 mm
Item no.:116685
  • Splines wheel side: 20
  • Total length: 532 mm
  • Diameter 1: 80 mm
Item no.:2186820
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 828 mm
  • Joint diameter: 79 mm
Item no.:0817994
  • Inner diameter: 25 mm
Item no.:1193683
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 590 mm
  • Joint diameter: 79 mm
Item no.:2112029
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 823 mm
  • Joint diameter: 79 mm
Item no.:1102548
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 593 mm
  • Joint diameter: 79 mm
Item no.:0450503
  • Position: Front right, Inner
  • Inner splines: 23
  • Outer splines: 24
Item no.:140241
  • Position: Inner
  • Inner splines: 23
  • Splines gearbox side: 23
  • Total length: 180 mm
  • Outer splines: 23
Item no.:0516430
  • Position: Outer
  • Inner splines: 20
  • Splines wheel side: 20
  • Seal diameter: 43 mm
  • Outer diameter: 81 mm
Item no.:0579629
  • Position: Outer
  • Inner splines: 21
  • Seal diameter: 47 mm
  • Outer splines: 22
Showing 1–24 of 89 products

Drivetrain for Fiat Panda

The Fiat Panda is an iconic small car renowned for its practicality and versatility. To maintain the car's distinctive driving dynamics, a fully functioning drivetrain is essential. The drivetrain transfers power from the engine to the wheels, and in a compact car such as the Panda, these components endure substantial stress, especially in stop-start city driving. At CVJoint24, we understand the importance of every power-transmission component meeting the highest standards to ensure lasting durability and optimal performance.

Our range for the Fiat Panda is curated to meet the specific requirements of this model, whether you drive the classic front-wheel-drive version or the rugged 4x4. By focusing on specialist drivetrain expertise, we provide car parts that not only fit mechanically, but also match the vehicle's original specifications. This gives you complete peace of mind that the spare parts you install will operate seamlessly alongside your car's other systems for miles to come.

How the Fiat Panda drivetrain is built

The drivetrain on a Fiat Panda is engineered to be both efficient and compact. On front-wheel-drive models, the setup primarily comprises the gearbox, drive shafts and CV joints. The drive shafts transmit torque from the gearbox to the front wheels, while the CV joints allow the wheels to move with the suspension and steer while continuously delivering power. This design demands high precision to prevent vibrations and unnecessary wear on bearings and seals.

For the Fiat Panda 4x4, added complexity comes in the form of a propeller shaft and a rear differential. The prop shaft runs along the underside of the vehicle, sending power to the rear wheels whenever all-wheel drive is engaged. This system requires regular inspection of both universal joints and the centre bearing to avoid unwanted noise and imbalance. Understanding this layout is key to pinpointing which part needs replacing when issues arise, and we have the expertise to guide you to the right component for your specific Panda model.

Common faults and symptoms

There are several clear warning signs that the drivetrain in your Fiat Panda is wearing out. One of the most frequent symptoms is a clicking or knocking noise on full steering lock under acceleration. This typically points to a worn outer CV joint. If you instead experience vibrations throughout the car when accelerating, it may indicate that an inner constant velocity joint or the drive shaft itself is out of balance or damaged. On 4x4 models, vibrations can also stem from an unbalanced propeller shaft.

Another critical area is the CV boots protecting the joints. If a boot splits, lubricating grease escapes whilst road dirt and moisture penetrate, rapidly destroying the joint. It is therefore vital to inspect these rubber components regularly. If you spot grease splattered on the inside of the wheel rim or beneath the car, immediate action is required. By catching these symptoms early, you can often resolve the issue with a straightforward repair before the entire component fails and causes a breakdown.

Common parts to replace on the Fiat Panda

Depending on your driving style and road conditions, various drivetrain components wear at different rates. For the Fiat Panda, we see high demand for complete drive shafts, as this is often the most cost-effective solution for significant wear. We stock an extensive selection covering most model years and engine options. Here are the categories most relevant to your car:

  • Drive shafts for Fiat Panda – We carry several variants covering both right-hand and left-hand sides as well as different gearbox configurations.
  • Outer CV joints for Fiat Panda – 5 high-quality options to cure clicking noises when turning.
  • Inner CV joints for Fiat Panda – 1 dedicated model to eliminate vibrations under acceleration.
  • Propeller shafts for Fiat Panda – 3 robust options for Panda 4x4 owners needing to restore all-wheel-drive performance.

By selecting the right category, you can swiftly find the parts required for your repair. Each product is meticulously selected to meet our rigorous standards for durability and function.

How to find the right part for your Fiat Panda

Explore the relevant subcategory for your Fiat Panda:

On a model with various potential drivetrain issues, starting directly in the correct subcategory makes all the difference. By comparing the exact component sections for the Fiat Panda, it becomes much easier to distinguish between faults in the drive shaft, CV joint or propeller shaft and proceed to the page that best matches your symptoms and fitment.

Locating the correct spare part for a Fiat Panda can sometimes be tricky, as specifications vary according to engine variant, model year and whether the vehicle is fitted with ABS. The most reliable method to identify the correct component is to filter by your car's make, model and engine in our vehicle selector. This automatically presents only the parts that are technically compatible with your vehicle, eliminating the risk of ordering incorrect components.

Alongside vehicle details, it is wise to verify technical measurements such as the number of teeth on the ABS ring or overall driveshaft length if you are in any doubt. We provide comprehensive technical specifications for every product to assist your selection. If you remain unsure which inner CV joint or propeller shaft your Fiat Panda requires, our customer support team is always on hand with specialist drivetrain advice.

Why shop with CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist, dispatching orders across the EU from our central warehouse in Helsingborg, Sweden. We set ourselves apart from general motor factors through our dedicated focus on power transmission, giving you access to expertise and a product range few competitors can match. When you order from us, you receive a product hand-picked by specialists to ensure exact fitment and reliable function on your Fiat Panda. We know the technical nuances of every component.

Our extensive category depth means we frequently hold parts in stock that others struggle to source, particularly specialised items such as a propeller shaft for the Fiat Panda. Backed by fast European delivery and genuine passion for driveline engineering, we are the trusted choice for both DIY mechanics and professional garages. We are committed to delivering the best value by combining quality parts with the technical insight needed to keep your car driving safely and smoothly.

Frequently Asked Questions about Drivetrain Parts for Fiat Panda – Guaranteed Fit Spare Parts

How do I know if my Fiat Panda needs a new drive shaft?

The most common signs are vibrations under acceleration or unusual noises while driving. If you notice the car shaking excessively, particularly at higher speeds, you should inspect the condition of the drive shafts.

Do your CV joints fit both front-wheel drive and 4x4 models?

Many parts are specific to each drive system. We always recommend selecting your car's make, model and engine to ensure the part is an exact match for your Panda 4x4 or front-wheel-drive model.

What causes the clicking noise when I turn in my Panda?

This is a classic symptom of a worn outer CV joint. As the internal balls and tracks wear down, excess play develops, producing a distinct clicking sound under load when cornering.

Why does my Fiat Panda 4x4 vibrate during acceleration?

On 4x4 models, vibrations can stem from an imbalance or worn universal joints in the propeller shaft, but a faulty inner constant velocity joint can also be the cause. Check both systems to identify the issue.

Is it difficult to replace a CV boot yourself?

It requires proper tools and some mechanical experience, as the CV joint often needs to be removed from the shaft. However, it is an essential maintenance task to prolong the lifespan of your CV joints.

Do your CV joint kits include everything needed for the replacement?

Yes, our complete kits usually include the CV joint, CV boot, grease, clamps and, where required, a new centre bolt or hub nut to ensure a correct and secure installation.