Drive shafts for Fiat Panda

Find the right drive shaft for your Fiat Panda by selecting your car's make, model and engine. Our range covers components for front-wheel-drive hatchback models as well as...

Products for Drive shafts for Fiat Panda

53 products
1 - 24 of 53
Item no.:1151642
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 595 mm
  • Joint diameter: 73 mm
Item no.:2158612
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 759 mm
  • Joint diameter: 76 mm
Item no.:7301486
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 822 mm
  • Joint diameter: 73 mm
Item no.:411970
  • Position: Rear left
  • Splines wheel side: 22
  • Total length: 613 mm
  • Diameter 1: 72 mm
  • Diameter 2: 127 mm
Item no.:515456
  • Position: Rear right
  • Splines wheel side: 22
  • Total length: 622 mm
  • Diameter 1: 72 mm
  • Diameter 2: 127 mm
Item no.:1102113
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 669 mm
Item no.:2110124
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 918 mm
  • Joint diameter: 79 mm
Item no.:111433
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 611 mm
  • Joint diameter: 76 mm
  • Joint diameter, gearbox side: 73 mm
Item no.:118325
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 522 mm
  • Joint diameter: 79 mm
  • Diameter 1: 79 mm
Item no.:116685
  • Splines wheel side: 20
  • Total length: 532 mm
  • Diameter 1: 80 mm
Item no.:2186820
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 828 mm
  • Joint diameter: 79 mm
Item no.:1193683
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 590 mm
  • Joint diameter: 79 mm
Item no.:2112029
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 823 mm
  • Joint diameter: 79 mm
Item no.:1102548
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 593 mm
  • Joint diameter: 79 mm
Item no.:0157940
  • Splines wheel side: 20
  • Total length: 820 mm
  • Joint diameter: 80 mm
  • Diameter 1: 80 mm
Item no.:1172361
  • Position: Front left
  • Thread size: M22x1.5
Item no.:2162818
  • Position: Front right
  • Thread size: M22x1.5
Item no.:1122860
  • Position: Front left
  • Splines gearbox side: 32
  • Splines wheel side: 25
  • Total length: 525 mm
  • Thread size: M22x1.5
Item no.:2175521
  • Position: Front right
  • Splines gearbox side: 32
  • Splines wheel side: 25
  • Total length: 758 mm
  • Thread size: M22x1.5
Item no.:1173852
  • Position: Front left
  • Splines wheel side: 20
  • Total length: 535 mm
  • Joint diameter: 80 mm
  • Tripod shaft diameter: 29 mm
Item no.:2179515
  • Position: Front right
  • Splines wheel side: 20
  • Total length: 820 mm
  • Joint diameter: 80 mm
  • Tripod shaft diameter: 29 mm
Item no.:2189232
  • Position: Front right
  • Splines wheel side: 20
  • Total length: 820 mm
  • Diameter 1: 80 mm
Item no.:1147111
  • Position: Front left
  • Splines wheel side: 20
  • Total length: 535 mm
  • Diameter 1: 80 mm
Item no.:112498
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 570 mm
  • Joint diameter: 84 mm
Showing 1–24 of 53 products

Drive shafts for Fiat Panda

The Fiat Panda is an iconic small car renowned for its agility and reliability in both city traffic and rougher environments. To maintain these valued qualities, a properly functioning drivetrain is essential to withstand daily wear and tear. A drive shaft for Fiat Panda is subjected to significant mechanical forces, particularly during frequent stop-start driving or when tackling uneven terrain in the 4x4 models. We stock numerous items tailored specifically to this model, ensuring coverage for most variants from early generations to modern iterations. Choosing the right component is crucial to prevent unnecessary wear on adjoining parts such as the gearbox and wheel bearings, as well as preserving road safety.

What does a drive shaft do on a Fiat Panda?

The main task of a drive shaft on a Fiat Panda is to transfer engine torque from the gearbox directly to the driven wheels, enabling movement. As the Panda is front-wheel drive (or all-wheel drive in 4x4 specification), the shaft must accommodate both suspension travel and significant steering angles without losing power transfer. This is made possible by the CV joints fitted at each end of the shaft. Without an intact shaft, power cannot reach the road, leaving the car immobilised. It is a critical link in the vehicle's power transmission that requires precision engineering and installation to handle high rotational speeds and the angle changes experienced during driving.

Common signs of wear

There are several distinct symptoms indicating that a drive shaft on your Fiat Panda is worn and due for replacement. One of the most common signs is vibration felt through the steering wheel or bodywork, especially under acceleration or at higher speeds. For Fiat Panda owners, it is also common to hear a rhythmic clicking noise on full steering lock, which often indicates that the outer joint is failing. If a visual inspection reveals grease splattered on the inside of the wheel rim or around the wheel arch, it is usually caused by a split CV boot. When the boot tears, dirt and moisture penetrate the joint while lubricating grease escapes, rapidly resulting in total failure that risks leaving you stranded.

How to choose the correct drive shaft

Finding the correct part for your vehicle can feel daunting due to the many technical variations, but our selection process makes it straightforward and reliable. The most important step is selecting your car by make, model and engine. The Fiat Panda comes in numerous specifications where details such as engine size (for example, the 1.2 petrol or 1.3 Multijet), gearbox type and whether the car has four-wheel drive affect the exact shaft dimensions. Parameters such as total driveshaft length and spline tooth counts at each end must match precisely for the component to fit properly. Always check whether the right-hand or left-hand side needs replacing, as they are rarely identical on this model. Our vehicle selector is optimised to give you an accurate match directly.

Related parts to inspect

Be sure to check these dedicated pages for the same vehicle when working on the drive shaft:

When a driveline component shows signs of wear, neighbouring parts on the vehicle often require inspection as well. Comparing these exact pages for the Fiat Panda makes it easier to determine whether the issue lies with the drive shaft itself or another adjacent section of the drivetrain.

This is especially important on models where vibrations, play and unusual noises can transfer symptoms across several parts within the same drivetrain. A quick check of related categories reduces the risk of replacing the correct component type while overlooking an adjoining part causing the same fault.

By thoroughly inspecting these related parts, you ensure the entire power transmission works optimally while minimising the risk of consequential damage to the rest of the car's running gear.

Why buy from CVJoint24?

As a Swedish driveline specialist shipping across Europe, we at CVJoint24 offer unmatched technical expertise and an extensive inventory few can rival. We understand the specific technical nuances of the Fiat Panda and focus exclusively on supplying car parts of the highest quality and exact fitment. By selecting your exact make, model and engine, you minimise the risk of ordering the wrong part, saving you both time and frustration during repairs. Our dedicated passion for drivetrains and power transmission enables us to provide technical support and specialised products far superior to general motor factors. Choosing us means you receive not just a spare part, but the peace of mind that comes from dealing with a specialist dedicated to keeping your car running smoothly.

Frequently asked questions about drive shafts for Fiat Panda – High quality & perfect fit

How do I know if my Fiat Panda needs a new drive shaft?

The most common signs are vibrations under acceleration, clicking noises when turning, or visible grease leaks from split CV boots around the wheels.

Can I replace just the CV joint instead of the complete drive shaft?

Yes, if the shaft bar itself is undamaged, you can often replace just the inner or outer CV joint, which can be a more cost-effective option.

Is there a difference between drive shafts for Fiat Panda 4x4 and front-wheel-drive models?

Yes, there is a significant difference. The 4x4 models often have different lengths and specifications on their drive shafts compared to the standard front-wheel-drive versions.

Why is the spline count important when buying a drive shaft?

Splines are the teeth at the ends of the shaft. If the tooth count does not match the car's wheel hub or gearbox exactly, the shaft cannot be fitted.

How long does it take to replace a drive shaft on a Fiat Panda?

For an experienced mechanic, it usually takes between 1 and 2 hours per side, depending on the car's condition and whether any bolts are seized.

Are CV boots and grease included when I buy a complete drive shaft?

Yes, when you buy a complete drive shaft from us, it is delivered fully assembled with new CV boots, joints, and the correct amount of lubricating grease.