Fiat Ulysse
Spare parts and drivetrain components for the Fiat Ulysse.
Products for Fiat Ulysse
- Position: Front left
- Total length: 640 mm
- Splines gearbox side: 24
- Splines wheel side: 27
- ABS teeth: 48
- Position: Outer
- Seal diameter: 59 mm
- Inner splines: 34
- Outer splines: 27
- Joint diameter: 89,8 mm
- Position: Front left
- Total length: 641 mm
- Splines gearbox side: 37
- Splines wheel side: 27
- ABS teeth: 48
- Position: Front right
- Total length: 970 mm
- Splines gearbox side: 37
- Splines wheel side: 27
- Position: Front left
- Total length: 656 mm
- Splines gearbox side: 26
- Splines wheel side: 27
- Position: Front right
- Total length: 865 mm
- Splines gearbox side: 26
- Splines wheel side: 27
- Position: Outer
- ABS teeth: 48
- Seal diameter: 59 mm
- Inner splines: 39
- Outer splines: 27
- Position: Front
- ABS teeth: 48
- Inner diameter: 90 mm
- Outer diameter: 99 mm
- Width: 10 mm
- Position: Front left
- Total length: 647 mm
- Splines gearbox side: 24
- Splines wheel side: 27
- Position: Front right
- Total length: 929 mm
- Splines gearbox side: 24
- Splines wheel side: 27
- Position: Front right
- Total length: 929 mm
- Splines gearbox side: 24
- Splines wheel side: 27
- ABS teeth: 48
- Position: Front left
- Total length: 631 mm
- Splines gearbox side: 37
- Splines wheel side: 27
- Position: Outer
- Seal diameter: 58 mm
- Inner splines: 28
- Total length: 143,5 mm
- Splines wheel side: 27
- Position: Front, Outer
- Inner splines: 39
- Outer diameter: 100 mm
- Splines wheel side: 27
- Position: Front, Outer
- Inner splines: 39
- Outer diameter: 100 mm
- Splines wheel side: 27
- Position: Outer
- Seal diameter: 59 mm
- Inner splines: 34
- Total length: 137 mm
- Splines wheel side: 27
- Total length: 642 mm
- Splines gearbox side: 37
- Splines wheel side: 27
- ABS teeth: 0
- Position: Front, Outer
- Inner splines: 34
- Outer diameter: 90 mm
- Splines wheel side: 27
- ABS teeth: 48
- Position: Front, Outer
- Inner splines: 34
- Outer diameter: 90 mm
- Splines wheel side: 27
- Total length: 648 mm
- Splines gearbox side: 24
- Splines wheel side: 27
- ABS teeth: 48
- Position: Front left
- Total length: 637 mm
- Splines gearbox side: 37
- Splines wheel side: 27
Drivetrain for Fiat Ulysse
The Fiat Ulysse is a spacious MPV that requires a dependable powertrain to cope with demanding urban driving as well as long journeys with heavy loads. The drivetrain is at the very heart of your vehicle's mobility, and here at CVJoint24 you will find a dedicated range tailored specifically to this model. With 21 unique items in our catalogue, we cover the most vital requirements for your car's ongoing maintenance. Looking after the drivetrain is essential for both road safety and driving comfort, especially in a vehicle often used for family transport where reliability is paramount. We supply components tested to meet the exact demands of this vehicle platform.
How the drivetrain is designed on the Fiat Ulysse
The Fiat Ulysse is built on a front-wheel-drive platform where power transfers from the engine through the gearbox directly to the front wheels. The system consists of several interacting components, in which a drive shaft for the Fiat Ulysse plays a central role in transferring torque. Each shaft is fitted with two joints: an inner joint at the gearbox and an outer CV joint for the Fiat Ulysse at the wheel hub. The outer joint is an advanced constant velocity joint that allows the wheels to steer while simultaneously delivering drive. In addition, an ABS ring for the Fiat Ulysse is frequently mounted on the outer joint to provide accurate wheel speed signals to the braking system and active safety aids.
Common faults and symptoms
There are several distinct signs that drivetrain components are wearing out on your Fiat Ulysse. One of the most frequent symptoms is a clicking or knocking sound on full steering lock while driving, which typically points to a defective outer CV joint or loss of lubrication caused by a split CV boot. If you instead notice vibrations through the steering wheel or vehicle chassis during acceleration, this can indicate imbalance or internal wear within the drive shaft itself. Another common issue is an illuminated ABS warning light on the instrument cluster, often caused by a cracked or corroded ABS reluctor ring that fails to supply a clear signal to the sensor, compromising braking performance.
Common parts to replace on the Fiat Ulysse
Based on our data and customer demand for the Fiat Ulysse, three main categories are most relevant when carrying out drivetrain repairs. We currently offer an extensive range comprising 14 drive shafts, 5 outer CV joints and 2 ABS rings for this model. Selecting the correct category allows you to streamline your repair and restore your vehicle's original reliability.
- Drive shaft for Fiat Ulysse – Complete assemblies for a quick, dependable replacement of the entire power transmission shaft.
- Outer CV joint for Fiat Ulysse – The ideal solution when only the joint has worn out while the driveshaft itself remains intact.
- ABS ring for Fiat Ulysse – A cost-effective replacement when wheel-speed sensors flag fault codes due to physical ring damage.
How to find the right part for your Fiat Ulysse
Go directly to the right category for your Fiat Ulysse:
On a vehicle with several possible driveline issues, it makes sense to start in the correct section right away. By comparing the exact component areas for the Fiat Ulysse, it is straightforward to distinguish between faults in a drive shaft, CV joint or propeller shaft, taking you directly to the parts that match your symptoms and exact fitment.
Selecting the right spare part for a Fiat Ulysse can be challenging, as technical specifications often vary by engine option, gearbox type and precise model year. The most reliable way to find the correct component in our catalogue is to select your vehicle's make, model and engine variant. Choosing your car's details automatically filters down to the 21 products compatible with your specific model. We also recommend checking key dimensions, such as the tooth count on the ABS ring or the total length of the drive shaft, if your car has specific factory equipment. This attention to detail guarantees an accurate fit during installation and eliminates the hassle of incorrect assemblies or returns.
Why buy from CVJoint24
CVJoint24 is your Swedish driveline specialist, supplying dedicated drivetrain and power transmission components from our central warehouse in Helsingborg, Sweden, across the EU. We focus exclusively on this specialist area, offering in-depth expertise and product coverage that general car parts retailers rarely match. For Fiat Ulysse owners, this means we do not simply supply a part; we deliver the right part with assured fitment and lasting build quality. With our specialist background and focus on direct-fit components, you can trust our parts to handle tough European driving conditions all year round. We combine technical know-how with a clear catalogue to provide a smooth buying experience for all your replacement car parts.
Frequently Asked Questions about Drivetrain for Fiat Ulysse - Precision-Fit Spare Parts
How do I know if my Fiat Ulysse needs a new drive shaft?
The most common signs are vibrations through the car during acceleration or unusual noises coming from underneath. If the vibrations stop when you take your foot off the accelerator, this is a strong indication that the drive shaft is worn.
Why is there a clicking noise when I turn in my Fiat Ulysse?
A clicking noise when cornering is almost always caused by a worn outer CV joint. It is typically the result of a split CV boot that has allowed road dirt to enter and grease to leak out.
Can I replace just the ABS ring on my Fiat Ulysse?
Yes, if your vehicle uses a separate ABS ring mounted on the CV joint, you can replace just the ring. This is a much more cost-effective repair than replacing the complete CV joint if the fault lies solely with the ring.
How do I find the exact CV joint for my model year?
Select your vehicle's make, model and engine variant in our search filter. As the Fiat Ulysse can feature different spline counts and dimensions depending on the engine, this is the most reliable way to find the correct part.
Do your CV joint kits include everything needed for the replacement?
Yes, our outer CV joint kits are normally supplied complete with CV boot, grease, clamps and necessary fixings to ensure a professional installation.
Are the drive shafts for Fiat Ulysse balanced prior to delivery?
Yes, all complete drive shafts we supply are factory-balanced to eliminate vibrations and ensure smooth power delivery straight after fitting.