Ford Probe

Welcome to your drivetrain specialist for the Ford Probe. As Swedish driveline experts, we supply a comprehensive range of premium car parts to keep your vehicle's power delivery working...

Products for Ford Probe

37 products
25 - 37 of 37
Item no.:0550306
  • Position: Front, Outer
  • Inner splines: 25
  • Seal diameter: 56 mm
  • Outer splines: 26
  • Thread size: M22X1,5
Item no.:0608530
  • Total length: 102 mm
Item no.:1191289
  • Position: Front left
  • Splines gearbox side: 28
  • Splines wheel side: 28
  • Total length: 633 mm
  • Joint diameter: 87 mm
Item no.:0570125
  • Position: Outer
  • Inner splines: 26
  • Seal diameter: 56 mm
  • Outer splines: 28
  • ABS teeth: 44
Item no.:0674263
  • Outer diameter: 25 mm
  • Diameter: 79 mm
Item no.:148229
  • Position: Inner
  • Inner splines: 26
  • Seal diameter: 35 mm
  • Splines wheel side: 28
  • Diameter: 35 mm
Item no.:355628
  • Position: Front, Outer
  • Inner splines: 23
  • Seal diameter: 56 mm
  • Outer splines: 26
  • Thread size: M22X1,5
Item no.:1179980
  • Position: Front left
  • ABS teeth: 44
Item no.:2171275
  • Position: Front right
  • ABS teeth: 44
Item no.:1143881
  • Position: Front left
  • Splines wheel side: 28
  • Total length: 627 mm
  • Joint diameter: 94 mm
  • ABS teeth: 44
Item no.:2183441
  • Position: Front right
  • Splines wheel side: 28
  • Joint diameter: 94 mm
  • ABS teeth: 44
Item no.:0609619
  • Outer diameter: 27 mm
  • Diameter: 90 mm
Item no.:359759
  • Position: Outer
  • Inner splines: 26
  • Seal diameter: 56 mm
  • Outer splines: 28
  • ABS teeth: 44
Showing 25–37 of 37 products

Drivetrain for Ford Probe

The Ford Probe is an iconic sports coupé that requires specific components to maintain its distinctive driving dynamics and performance. The drivetrain is the heart of the car's power delivery, and here at CVJoint24 you will find a carefully selected range tailored specifically to this model. With a broad range in our catalogue, we cover most needs for the Ford Probe, whether for routine maintenance or urgent repairs. Maintaining the drivetrain is vital for the safety and service life of your car, especially as these models are often driven more enthusiastically and place greater demands on component durability. We understand the technical nuances of the Ford Probe's design and supply parts that meet or exceed original equipment specifications to guarantee a trouble-free driving experience.

Our focus is on providing the right part for the right car. By specialising purely in drivetrains, we offer technical expertise that extends far deeper than generic car parts stores. For the Ford Probe, this means we keep track of everything from spline counts to shaft lengths, which is critical for eliminating vibrations and preventing future breakdowns. Every component in our range is chosen for its build quality and precise fitment, making us the natural choice for Ford owners across Europe.

How the drivetrain works on the Ford Probe

The Ford Probe is built on a front-wheel-drive platform where power is transferred from the gearbox directly to the front wheels via the drive shafts. The system consists of several critical components working together to deliver smooth, efficient power transmission. An inner CV joint for Ford Probe is mounted closest to the gearbox, where its primary job is to handle the axial plunge movements that occur as the car's suspension travels up and down. This inner joint is vital for eliminating vibrations under acceleration and keeping the drivetrain stable under varying engine loads.

Further out towards the wheels sits the outer CV joint, which allows the wheels to turn for steering while continuously transferring power. This entire mechanical assembly is shielded by CV boots that retain vital lubricating grease and prevent dirt, water, and road salt from penetrating the delicate bearings. Because the Ford Probe has a specific mechanical architecture, dimensional accuracy is absolutely crucial. An incorrect drive shaft dimension or a constant velocity joint with the wrong spline count can cause costly secondary damage. That is why our range is meticulously organised to match the exact specifications of your vehicle's driveline.

Common faults and symptoms

There are several clear warning signs when drivetrain components start to fail on your Ford Probe. One of the most typical symptoms is a rhythmic clicking or knocking noise when cornering on full lock, such as when parking or taking sharp turns. This almost always indicates that an outer CV joint for Ford Probe is worn out and requires replacement. If you instead experience vibrations through the steering wheel or car body under acceleration, it may point to an out-of-balance driveshaft or wear inside an inner CV joint.

Another common point of failure identified during routine servicing or annual inspections is split or leaking CV boots for Ford Probe. If a boot tears, grease is rapidly thrown out by centrifugal force; once the joint runs dry, wear accelerates dramatically. Furthermore, a fractured ABS ring for Ford Probe can trigger the ABS warning light on the dashboard or cause abnormal brake pedal pulsing during low-speed braking. Catching these symptoms early often saves substantial money, as replacing a damaged boot or an individual constant velocity joint prevents having to replace the entire driveshaft later.

Common parts to replace on the Ford Probe

Based on our extensive records and customer demand, certain parts are subjected to higher wear than others on the Ford Probe. We stock multiple variants of drive shafts for Ford Probe, reflecting the technical variations across different engine sizes and model years. Replacing a complete drive shaft is frequently the most time-efficient method of overhauling the drivetrain, as you receive new inner and outer joints alongside factory-fitted CV boots in one single unit, eliminating the risk of future failures.

In addition to complete drive shafts, outer CV joints and CV boot kits remain in steady demand. We also see frequent orders for ABS rings, which on the Ford Probe often suffer from corrosion that causes them to crack or lose teeth, disrupting the sensor signal. By offering an extensive selection of both complete shaft units and specific repair kits, we help you find the most cost-effective solution for your vehicle. Our inventory is optimised to cover the most frequent repair requirements, ensuring your Ford Probe stays dependable on the road.

How to find the right part for your Ford Probe

Navigate directly to the relevant subcategory for your Ford Probe:

When dealing with a vehicle that has multiple potential driveline issues, it pays to start in the correct category straight away. Comparing the dedicated component groups for your Ford Probe makes it easier to isolate problems between the drive shaft, CV joints or prop shaft, taking you directly to the parts that match your symptoms and exact fitment.

Selecting the appropriate section will instantly display all matching parts available. We always recommend cross-referencing the technical measurements in the product description with your existing component to be completely certain of fitment, especially if your car has had past mechanical modifications.

Why buy from CVJoint24

As a Swedish driveline specialist shipping across the EU, we offer deep product knowledge and a dedicated range that general motor factors cannot match. Because we focus exclusively on power transmission components, we ensure higher quality standards and greater precision in our vehicle fitments. When you purchase from cvjoint24.com, you receive high-grade spare parts backed by our comprehensive fitment guarantee, ensuring peace of mind when selecting your car by make, model and engine.

We recognise the importance of getting your car back on the road without delay. That is why we despatch orders promptly from our Swedish central warehouse to minimise downtime. Our business is built on helping you select the right replacement part first time at competitive prices. With extensive stock tailored to the Ford Probe and technical customer support ready to help, we are your reliable partner for all drivetrain maintenance. Choose an expert – choose CVJoint24 for your next repair.

Frequently asked questions about Ford Probe drivetrain parts

How do I know if my Ford Probe needs a new drive shaft?

The most common symptoms are heavy vibrations under acceleration or persistent drivetrain noises that remain even after replacing individual joints. If you notice that the drive shaft is bent or has excessive play in the joints, it is time for a replacement.

Do your CV joints fit both the 2.0 and 2.5-litre engines?

Yes, we supply parts for both engine options. However, it is vital to select your exact model and engine variant when browsing, as drive shafts and CV joints often differ in dimensions and spline counts between engine types.

Why is there a clicking noise when I turn in my Ford Probe?

A clicking sound while cornering is usually caused by a worn outer CV joint. As the internal bearings wear, play develops, producing this clicking noise under load. We recommend replacing the outer CV joint promptly to prevent complete failure.

Can I replace just the CV boot if it is split?

Yes, if you catch the damage early before dirt and moisture have damaged the joint, you can replace just the CV boot. We supply boot kits containing the boot, grease, and clamps for a complete repair.

What is included when I purchase a CV joint kit from you?

Our CV joint kits come complete and ready to install. They typically include the CV joint itself, a vehicle-specific CV boot, high-quality grease, circlips, and the required boot clamps.

How does your fitment guarantee work for the Ford Probe?

When you select your car's make, model, and engine variant and choose a part marked as compatible, we guarantee that the part is technically correct for your car. In the unlikely event that it does not fit, we will help you find the right part at no extra cost.