Honda CR V

Spare parts and drivetrain components for Honda CR V.

Products for Honda CR V

117 products
1 - 24 of 117
Item no.:0244303
  • Number of centre bearings: 1
  • Number of joints: 3
  • Total length: 2,063 mm
Item no.:628391
  • Position: Rear
  • Diameter: 25 mm
  • Hole spacing c/c: 200 mm
  • Total length: 1,760 mm
  • Bearing thickness: 49 mm
Item no.:624008
  • Position: Rear
  • Diameter: 25 mm
  • Hole spacing c/c: 200 mm
  • Total length: 1,862 mm
  • Bearing thickness: 49 mm
Item no.:4129608
  • Position: Rear left
  • Total length: 768 mm
  • Splines gearbox side: 23
  • Splines wheel side: 28
Item no.:5130676
  • Position: Rear right
  • Total length: 819 mm
  • Splines gearbox side: 23
  • Splines wheel side: 28
Item no.:0593953
  • Position: Outer
  • Seal diameter: 64 mm
  • Inner splines: 32
  • Outer splines: 28
  • Joint diameter: 97 mm
Item no.:0409236
  • Position: Inner
Item no.:0271696
  • Number of centre bearings: 1
  • Number of joints: 3
  • Total length: 2,060 mm
Item no.:2186914
  • Position: Front right
  • Total length: 565 mm
  • Splines gearbox side: 29
  • Splines wheel side: 30
Item no.:647545
  • Position: Rear, Inner
  • Splines gearbox side: 25
  • Splines wheel side: 23
  • ABS teeth: 23
Item no.:0565611
  • Position: Outer
  • Seal diameter: 68 mm
  • Inner splines: 32
  • Outer splines: 30
Item no.:459861
  • Position: Rear, Outer
  • Seal diameter: 55 mm
  • Inner splines: 20
  • Diameter: 55 mm
  • Total length: 144 mm
Item no.:627791
  • Diameter: 20 mm
  • Total length: 52 mm
Item no.:543531
  • Position: Rear, Inner
  • Splines gearbox side: 20
  • Splines wheel side: 23
Item no.:627141
  • Position: Rear
  • Total length: 2,075 mm
Item no.:1174456
  • Position: Front left
  • Total length: 666 mm
  • Splines gearbox side: 27
  • Splines wheel side: 30
Item no.:1184658
  • Position: Front left
  • Total length: 564 mm
  • Splines gearbox side: 27
  • Splines wheel side: 30
Item no.:654141
  • Position: Rear, Outer
  • Seal diameter: 55 mm
  • Inner splines: 25
  • Diameter: 55 mm
  • Outer diameter: 64 mm
Item no.:0240162
  • Diameter: 25 mm
  • Hole spacing c/c: 160 mm
  • Bearing thickness: 48 mm
Item no.:1139775
  • Position: Front left
  • Total length: 666 mm
  • Splines gearbox side: 27
  • Splines wheel side: 28
Item no.:0552832
  • Position: Outer
  • Seal diameter: 63 mm
  • Inner splines: 32
  • Outer splines: 28
  • Joint diameter: 94 mm
Item no.:2100059
  • Position: Front right
  • Total length: 612 mm
  • Splines gearbox side: 25
  • Splines wheel side: 28
Item no.:315789
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 28
Showing 1–24 of 117 products

Drivetrain for Honda CR V

The Honda CR V is renowned for its reliability and versatility, but maintaining these qualities requires a drivetrain in peak condition. The drivetrain is the system that transfers engine power to the wheels, and in an SUV like the CR V, these components are often subjected to heavy loads, especially when towing or driving over rough ground. We provide a carefully selected range of spare parts tailored specifically to meet the demands of your Honda. Choosing the right components extends your car's service life and ensures a safe driving experience for driver and passengers alike. Our driveline expertise allows us to supply car parts of the highest quality with a precise fit for your vehicle.

How the Honda CR V drivetrain is engineered

The drivetrain layout of a Honda CR V varies depending on whether the car is front-wheel drive or fitted with Honda's all-wheel-drive system. The setup consists of several critical components, including the gearbox, drive shafts and, on four-wheel-drive models, a Honda CR V propeller shaft delivering torque to the rear wheels. Up front, drive shafts feature both inner and outer joints, allowing the front wheels to articulate with the suspension and steer while continuously transferring power. The rear axle on AWD models utilises similar assemblies to power the rear wheels whenever the system detects front-wheel slip. This intricate mechanical assembly demands that every component works in perfect unison to prevent premature wear on neighbouring parts.

Common faults and symptoms

There are several clear signs that a drivetrain component on your Honda CR V is beginning to fail. One of the most typical symptoms is a clicking noise during sharp cornering, which usually points to a worn Honda CR V outer CV joint or a split CV boot. If you instead experience vibrations through the vehicle under acceleration, this often indicates an issue with an inner CV joint. On four-wheel-drive versions, drivetrain vibration or unusual noises from beneath the car can suggest that the prop shaft or its centre bearing requires attention. Ignoring these symptoms can lead to more severe damage to the gearbox and suspension, resulting in costlier repairs down the road.

Common parts to replace on the Honda CR V

Based on our sales data and customer demand, certain components are replaced far more frequently than others on the Honda CR V. We currently stock an extensive range including 14 drive shafts, 6 outer CV joints and 3 inner constant velocity joints dedicated to this model. In addition, we keep 5 different propeller shafts and ABS rings on hand to cover most needs. Here are the most relevant categories for your vehicle:

  • Drive shaft for Honda CR V – complete shafts for a straightforward, direct replacement.
  • Outer CV joint for Honda CR V – to eliminate clicking noises when turning.
  • Inner CV joint for Honda CR V – to cure shudder and vibration under acceleration.
  • Propeller shaft for Honda CR V – for four-wheel-drive variants suffering from driveline imbalance.
  • ABS ring for Honda CR V – when the ABS light illuminates due to corrosion or hairline cracks.

Securing the correct replacement parts promptly is essential for minimising garage downtime and preserving your car's dependable road manners.

How to find the right part for your Honda CR V

Navigate directly to the appropriate section for your Honda CR V:

With a vehicle exhibiting multiple potential drivetrain faults, starting in the precise product category saves time. By comparing the exact sections for the Honda CR V, it becomes much simpler to distinguish between drive shaft, CV joint or propeller shaft issues and proceed to the page that matches your symptoms and fitment.

Identifying the exact component for your Honda CR V can sometimes be challenging, as technical specifications often vary across generations and engine options. The most reliable way to find the correct fit is by selecting your car's exact make, model and engine in our vehicle selector. This filters out unsuitable items and displays parts verified for your car. It is nonetheless always sensible to verify technical details, such as spline counts on CV joints or overall driveshaft length, whenever several options are listed for the same model year. Our database is engineered for optimum accuracy, minimising the risk of incorrect orders and saving valuable workshop time.

Why choose CVJoint24

CVJoint24 is the international webshop of a Swedish driveline specialist, backed by profound technical knowledge of vehicle power transmission. We recognise the vital importance of exact dimensions and dependable quality in the drivetrain. Unlike general automotive parts retailers, we concentrate exclusively on driveline components, enabling us to provide an unmatched combination of comprehensive stock and specialist technical advice. When you order from us, you receive parts manufactured to meet or exceed original equipment standards. With our clear vehicle model selector and dedicated customer support, we are the natural choice for Honda CR V owners across Europe seeking reliable driveline parts.

Frequently Asked Questions about Drivetrain Parts for Honda CR-V

How do I know if my Honda CR-V needs a new drive shaft?

Common signs include severe vibrations while driving or knocking noises from the front suspension. If the CV boot is split and grease has leaked out over a long period, there is a high risk that the complete drive shaft will need replacing.

Do all CV joints fit every model year of the Honda CR-V?

No, specifications vary between different generations and engine variants. It is essential to check the spline count and dimensions. Select your car's make, model and engine in our search tool to find the correct part.

What causes vibrations in a four-wheel-drive Honda CR-V?

Vibrations are often caused by wear in the universal joints or centre bearing of the propeller shaft. Worn inner CV joints can also cause similar symptoms under acceleration.

Why is the ABS warning light on in my Honda CR-V?

A common cause is a cracked or corroded ABS ring. This disrupts the sensor's signal and triggers a system fault. We supply replacement ABS rings that resolve the problem without needing to replace the entire CV joint.

Is it difficult to replace a CV joint yourself on a Honda CR-V?

It requires the right tools and a certain level of mechanical experience. Because the drivetrain is a safety-critical assembly, we recommend following the workshop manual carefully or entrusting the job to a professional garage.

How often should I check the drivetrain CV boots?

We recommend a visual inspection at every service or wheel change. An intact CV boot protects the constant velocity joint from dirt and moisture, significantly extending its service life.