Hyundai Trajet

Spare parts and drivetrain components for the Hyundai Trajet.

Products for Hyundai Trajet

40 products
1 - 24 of 40
Item no.:346911
  • Position: Inner
  • Inner splines: 23
  • Seal diameter: 41 mm
  • Total length: 156 mm
  • Joint diameter: 81 mm
Item no.:152798
  • Position: Outer
  • Inner splines: 34
  • Splines wheel side: 27
  • ABS teeth: 47
Item no.:1196965
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 27
  • Total length: 660 mm
  • ABS teeth: 47
Item no.:0349550
  • Position: Front
  • ABS teeth: 47
  • Inner diameter: 85 mm
  • Outer diameter: 102 mm
  • Width: 10 mm
Item no.:0574726
  • Position: Outer
  • Inner splines: 25
  • Seal diameter: 60 mm
  • Outer splines: 27
  • ABS teeth: 47
Item no.:0637112
  • Outer diameter: 27 mm
  • Diameter: 90 mm
Item no.:117811
  • Splines gearbox side: 27
  • Splines wheel side: 27
  • Total length: 663 mm
  • Joint diameter: 92 mm
  • ABS teeth: 47
Item no.:2143832
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 27
  • Total length: 973 mm
  • ABS teeth: 47
Item no.:0361466
  • Position: Front
  • ABS teeth: 47
  • Inner diameter: 90 mm
  • Outer diameter: 101 mm
  • Width: 10 mm
Item no.:0588497
  • Position: Outer
  • Inner splines: 23
  • Splines wheel side: 27
  • Seal diameter: 60 mm
  • ABS teeth: 47
Item no.:0684564
  • Total length: 96 mm
Item no.:215382
  • Splines gearbox side: 27
  • Splines wheel side: 27
  • Total length: 975 mm
  • ABS teeth: 47
Item no.:0643953
Item no.:350852
  • Position: Front, Outer
  • Inner splines: 26
  • Seal diameter: 60 mm
  • Outer splines: 27
  • ABS teeth: 47
Item no.:349267
  • Position: Front, Inner
  • Inner splines: 25
  • Splines gearbox side: 27
  • Seal diameter: 41 mm
  • Outer diameter: 84 mm
Item no.:0630076
  • Total length: 114 mm
Item no.:341015
  • Position: Front, Inner
  • Inner splines: 25
  • Seal diameter: 41 mm
  • Total length: 155,3 mm
  • Joint diameter: 87 mm
Item no.:0645855
  • Total length: 138 mm
Item no.:0675505
  • Total length: 91 mm
Item no.:0984044
  • Inner diameter: 39 mm
  • Outer diameter: 61 mm
Item no.:0959058
  • Inner diameter: 39 mm
  • Outer diameter: 61 mm
Item no.:694706
  • Position: Rear
Item no.:140714
  • Position: Front left, Inner
  • Inner splines: 34
  • Splines gearbox side: 27
  • Seal diameter: 41 mm
  • Outer diameter: 91 mm
Showing 1–24 of 40 products

Drivetrain for Hyundai Trajet

The Hyundai Trajet is a versatile MPV that demands dependable drivetrain components to cope with both busy city driving and long family journeys under full load. The drivetrain is vital to the vehicle's movement, and for a model such as the Trajet it is crucial that every part can handle the weight and strain placed upon it. At CVJoint24 you will find a dedicated range covering the most essential requirements for this model, from complete drive shafts to specific CV joint repair kits. By prioritising quality and precise fitment, we ensure your vehicle remains safe on the road for many kilometres to come. We understand how important it is that every component works seamlessly together to prevent premature wear on surrounding parts.

How the Hyundai Trajet drivetrain is designed

The Hyundai Trajet uses a traditional front-wheel-drive layout with a transverse engine, standard for this type of spacious minibus. Power is transferred from the gearbox via two drive shafts of different lengths to the front wheels. Each drive shaft is fitted with an inner and an outer CV joint, allowing for suspension travel and steering angles whilst delivering a continuous flow of power. The outer joint is under substantial load as it must operate at acute angles at full lock during parking and tight town manoeuvres. Furthermore, many models feature an ABS system where an ABS ring for Hyundai Trajet is seated on the outer constant velocity joint to relay precise wheel-speed signals to the safety electronics. Understanding this arrangement helps pinpoint the exact source of a problem before expensive secondary damage occurs.

Common faults and symptoms

There are several clear warnings that drivetrain components on your Hyundai Trajet are worn or failing. One of the most typical signs is a distinct clicking or knocking noise when turning sharply, which usually points to a failing outer CV joint on your Hyundai Trajet. This is frequently triggered by a split CV boot that has let in road dirt and moisture, quickly destroying the joint's grease. Vibrations through the steering wheel or bodywork under acceleration often indicate imbalance or wear in the drive shaft itself or in the inner joint closest to the gearbox. If the ABS warning light illuminates unexpectedly, it is often down to a cracked or corroded ABS ring—a common issue on vehicles driven through harsh European winters where road salt accelerates rust.

Common parts to replace on the Hyundai Trajet

Based on our experience, three main product categories are routinely required to keep this model running reliably. To help you navigate our catalogue easily and find the correct part, we have organised our range into clear subcategories tailored to the Trajet:

  • Drive shafts for Hyundai Trajet: We stock several specific versions to suit various engine sizes and gearbox options.
  • Outer CV joints for Hyundai Trajet: 3 high-quality options supplied as complete kits including CV boot and grease.
  • ABS rings for Hyundai Trajet: 2 distinct specifications to guarantee precise compatibility with your braking system.

These components are vital for safe handling and roadworthiness. Replacing a complete driveshaft is often quicker and more cost-effective than rebuilding worn joints, especially if the original shaft shows heavy corrosion or dynamic imbalance affecting ride comfort.

How to find the right part for your Hyundai Trajet

Navigate directly to the relevant category for the Hyundai Trajet:

With several possible drivetrain issues on an MPV of this age, starting in the right section makes diagnosis simpler. Comparing the relevant subcategories for the Hyundai Trajet makes it straightforward to distinguish between faults in a drive shaft, CV joint or propeller shaft, taking you directly to the parts that match your symptoms and specifications.

Selecting the correct spare part for a Hyundai Trajet requires care, as technical specifications vary between engine choices—such as the 2.0 petrol, 2.7 V6 or 2.0 CRDi diesel—and between manual or automatic gearboxes. The most reliable way to identify suitable parts is by selecting your car's make, model and engine in our vehicle selector. This filters for components technically verified for your specific car. It is still wise practice to check the spline count on your old unit, both into the wheel hub and onto the shaft, as slight variations can occur within the same model year. Comparing our detailed measurements and product drawings with your original part minimises the risk of ordering mistakes and ensures a smooth repair.

Why shop with CVJoint24

As a Swedish driveline specialist shipping across the EU, we provide technical expertise and focus that generic car-parts stores simply cannot match. We know the mechanical nuances of the Hyundai Trajet drivetrain and stock only components that meet our rigorous standards. Our deep category focus means we can supply solutions and exact components where general suppliers fall short. With our straightforward vehicle search, fast dispatch from our warehouse in Helsingborg, Sweden, and knowledgeable technical support, we are the trusted choice for DIY mechanics and professional garages seeking durable components. We build our reputation on accurate fitment and lasting reliability for your car's All car makes, giving you complete confidence on every journey.

Frequently Asked Questions about Drivetrain Parts for Hyundai Trajet - High-Quality Spare Parts

How do I know if my Hyundai Trajet needs a new drive shaft?

The most common signs are heavy vibrations throughout the vehicle under acceleration or a persistent knocking noise from the front suspension. If you notice that a CV boot is split and grease has leaked out, there is a high risk that the shaft or CV joint has already suffered damage.

Why is the ABS warning light on in my Hyundai Trajet?

On the Hyundai Trajet, a cracked, corroded or heavily soiled ABS ring is a very common cause. The ring is mounted on the outer CV joint; if it cracks or breaks, the sensor cannot read wheel speed correctly, triggering the warning light.

Do all outer CV joints fit every Hyundai Trajet model?

No, there are variations depending on the engine variant and whether or not the vehicle is equipped with ABS. It is crucial to verify the spline tooth count and the number of teeth on the ABS ring before fitting.

Can I replace just the ABS ring, or do I need to replace the entire CV joint?

In many cases, you can replace just the ABS ring if the CV joint itself is otherwise in sound mechanical condition. We supply individual ABS rings for Hyundai Trajet to provide a more cost-effective repair solution.

What is the difference between the inner and outer CV joint on this model?

The outer CV joint sits at the wheel hub and accommodates steering angles, whilst the inner CV joint is fitted at the gearbox and primarily manages vertical suspension travel. Wear symptoms differ: a worn outer joint typically clicks when cornering, whereas a worn inner joint causes vibrations during acceleration.