Inner CV joints for Audi A4 Avant 1.9 TDI Quattro

Here we have gathered inner CV joints for the Audi A4 Avant 1.9 TDI Quattro, equipped with all-wheel drive. To ensure you find the exact part for your drivetrain, this section only...

Products for Inner CV joints for Audi A4 Avant 1.9 TDI Quattro

7 products
1 - 7 of 7
Item no.:0429812
  • Position: Inner
  • Seal diameter: 130 mm
  • Inner splines: 34
Item no.:0496987
  • Position: Inner
  • Seal diameter: 100 mm
  • Inner splines: 33
  • Joint diameter: 100 mm
Item no.:0449917
  • Position: Inner
  • Seal diameter: 123 mm
  • Inner splines: 34
Item no.:0224965
  • Position: Inner
  • Inner splines: 25
  • Joint diameter: 100 mm
Item no.:0456394
  • Position: Inner
  • ABS teeth: 0
  • Inner splines: 28
  • Joint diameter: 108 mm
  • Outer diameter: 108 mm
Item no.:345086
  • Position: Inner
  • Inner splines: 26
  • Joint diameter: 119 mm
Item no.:349563
  • Position: Front, Inner
  • Inner splines: 34

Inner CV joints for Audi A4 Avant 1.9 TDI Quattro

When it comes to the Audi A4 Avant 1.9 TDI Quattro, the drivetrain is at the very heart of the car's performance. The inner CV joint plays a vital role in transferring torque from the gearbox to the drive shafts, particularly on an all-wheel-drive car where the load is distributed across all four wheels. Here at CVJoint24, you will find inner CV joints precisely tailored to the technical specifications of your Audi. We understand the importance of every transmission component working in complete harmony to preserve the car's handling and safety. Choosing the correct spare part is not merely a matter of function, but also of long-term durability for the entire vehicle.

Our range covers the specific demands created by a high-torque diesel engine combined with all-wheel drive. By focusing on quality-assured components, we can guarantee that power delivery occurs without unnecessary losses or vibrations. Every inner CV joint we supply is engineered to meet or exceed original equipment specifications, giving you complete confidence as a car owner that your repair will last over time.

What does an inner CV joint do on the Audi A4 Avant 1.9 TDI Quattro?

The inner CV joint is mounted closest to the gearbox or differential, and its primary task is to allow the drive shaft to move up and down in line with suspension travel while continuously rotating. Unlike the outer CV joint, which manages wide steering angles, the inner joint focuses on accommodating changes in driveshaft length. On an Audi A4 Avant 1.9 TDI Quattro, this is especially critical because the Quattro system requires stable, vibration-free power transmission to perform optimally across diverse road conditions.

Without a properly functioning inner constant velocity joint, power from the gearbox cannot be transferred smoothly to the wheels as the car travels over road imperfections. The joint acts as a vital link compensating for geometrical changes within the suspension during driving. For the 1.9 TDI engine, renowned for its strong low-end torque, these components endure significant stress under acceleration, making their condition fundamental to the driving experience.

Common signs of wear

Wear in an inner CV joint typically presents differently from wear in an outer joint. The most frequent symptom is vibration through the car body under acceleration, most noticeably felt at speeds between 70 and 100 km/h. If you notice your Audi shaking under load, only for the vibration to disappear as soon as you lift off the accelerator, this is a strong indication of a worn inner joint. It is generally caused by pitting in the joint's inner bearing tracks, which causes an imbalance under load.

Other symptoms include unusual noises under load or grease leaking from the CV boot. A split boot is often the underlying reason why the joint fails, as dirt and moisture penetrate while crucial lubricating grease is flung out. If caught early enough, a leaking boot can be resolved by cleaning the joint and fitting a replacement CV joint boot; however, once vibrations have begun, renewing the entire joint is usually the only permanent solution.

Choosing the correct inner CV joint

Selecting the right part for an Audi A4 Avant 1.9 TDI Quattro can be tricky, as variations exist depending on chassis number and gearbox type. It is essential to verify the spline count both internally and externally, along with the joint diameter. To make the process straightforward and reliable, we always recommend selecting your exact make, model and engine variant in our store selector. This filters down to the precise parts suited to your car's exact specification, allowing you to order with confidence and avoid incorrect parts.

When comparing different options, review the technical specifications to ensure they match your vehicle's original components. Because Quattro models feature a unique driveline setup front and rear, it is vital not to confuse these components with those for front-wheel-drive models. Our drivetrain expertise ensures the products we list for your Audi A4 Avant are fully compatible with four-wheel drive and the performance demands of the TDI engine.

Related parts to check

We recommend checking these exact pages for the same vehicle when working on the inner CV joint:

When a drivetrain component begins to show wear, adjacent parts on the vehicle often require inspection as well. Comparing these exact pages for the Audi A4 Avant 1.9 TDI Quattro makes it much easier to determine whether an issue lies purely with the inner CV joint or involves another nearby section of the driveline.

This is particularly relevant on models where vibrations, play and unwanted noises can transfer symptoms across several driveline components. Checking related categories reduces the risk of replacing one correct part while overlooking an adjacent component that contributes to the very same issue.

Replacing worn components at the same time saves both labour time and money over the long term. Maintaining a healthy drivetrain not only restores driving refinement, but also shields higher-cost components such as the gearbox and differential from unnecessary wear caused by persistent vibrations.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist shipping across the EU from our warehouse in Helsingborg, Sweden. We combine a comprehensive product range with dedicated technical expertise to offer the finest solutions for your Audi A4 Avant 1.9 TDI Quattro. With our accurate fitment and swift dispatch across Europe, we help keep your vehicle's garage downtime to an absolute minimum. We stock exclusively high-calibre car parts, which is essential to withstand the torque and strain of an all-wheel-drive turbo diesel.

With us, you always receive the right component alongside the specialist support required to keep your car performing at its best. We recognise that your Audi relies on precision engineering and that every component in the drivetrain must deliver optimal performance. By purchasing from a dedicated specialist, you benefit from focused product knowledge that general car parts stores often lack. Our exclusive focus on drivetrains ensures superior support, precise model fitment and components designed to endure demanding European road conditions.

Frequently Asked Questions about Inner CV Joints for Audi A4 Avant 1.9 TDI Quattro

How do I know whether it is the inner or outer CV joint that is faulty?

A worn inner CV joint usually causes vibrations through the whole car under acceleration, whereas an outer CV joint produces a distinct clicking noise when turning sharply at low speeds.

Can I replace just the inner CV joint on my Audi A4 Quattro?

Yes, on most Audi A4 Avant 1.9 TDI Quattro models the inner CV joint can be replaced separately, which is far more cost-effective than replacing the entire drive shaft.

Why does my Audi A4 Avant 1.9 TDI vibrate under acceleration?

This is often caused by wear in the raceways of the inner CV joint. Under acceleration, the load forces the joint into a position where this wear creates imbalance and noticeable vibration.

Are the boot and grease included when I buy an inner CV joint from you?

Yes, our inner CV joints are supplied as complete kits including the CV boot, specialised grease, clamps, and any mounting hardware required for a proper replacement.

Do all inner CV joints fit every A4 model?

No, there are significant differences depending on the engine, gearbox, and whether the car is equipped with Quattro. Always select your vehicle's make, model, and engine variant to ensure you get the right part.

What is the delivery time for an inner CV joint?

We dispatch in-stock parts promptly from our central warehouse, ensuring you can get your Audi A4 Avant 1.9 TDI Quattro back on the road without delay.