Inner CV joints for Audi A4 Avant 2.7 TDI

Looking for an inner CV joint for your Audi A4 Avant 2.7 TDI? This category covers parts for the estate model with front-wheel drive. Always verify fitment against your car's exact...

Products for Inner CV joints for Audi A4 Avant 2.7 TDI

6 products
1 - 6 of 6
Item no.:0484790
  • Position: Inner
  • Inner splines: 24
Item no.:0480277
  • Position: Inner
  • Inner splines: 34
  • Outer splines: 123
Item no.:346778
  • Position: Front, Inner
  • Total length: 84 mm
  • Splines wheel side: 24
Item no.:146983
  • Position: Front, Inner
  • Total length: 88 mm
  • Splines gearbox side: 34
  • ABS teeth: 34
Item no.:341784
  • Position: Front, Inner
  • Total length: 84 mm
  • Splines wheel side: 24
Item no.:145550
  • Position: Front, Inner
  • Total length: 88 mm
  • Splines gearbox side: 34
  • ABS teeth: 34

Inner CV joints for Audi A4 Avant 2.7 TDI

The inner CV joint is a fundamental part of the power transmission system on your Audi A4 Avant 2.7 TDI. This specific model, known for its powerful V6 diesel engine, generates substantial torque that places extremely high demands on every drivetrain component. Choosing an inner CV joint of the highest quality is therefore not just a matter of proper function, but of long-term durability and safety on the road. Here at CVJoint24, you will find carefully selected spare parts engineered to meet the exact tolerances of your car's chassis and drivetrain. By investing in a premium constant velocity joint, you ensure that engine power reaches the wheels without loss or disruptive vibrations, preserving the refined drive characteristic of an Audi A4 Avant 2.7 TDI.

What does the inner CV joint do on an Audi A4 Avant 2.7 TDI?

The primary function of the inner CV joint is to connect the gearbox to the drive shaft, while allowing the articulation required by the vehicle's suspension system. Unlike the outer CV joint, which sits at the wheel hub and must accommodate steep angles during steering, the inner CV joint mainly compensates for the changes in length that occur as the wheels move vertically over road imperfections. On an Audi A4 Avant 2.7 TDI, this is a demanding mechanical task, as the joint must maintain a smooth rotational speed even under heavy load. If the inner joint is worn or failing, it can cause imbalance throughout the entire drivetrain, which in turn leads to unnecessary wear on the gearbox output shafts and bearings.

Common signs of wear

Spotting wear on an inner CV joint early can save you from costly consequential damage. The most characteristic sign of a failing inner CV joint on your Audi A4 Avant 2.7 TDI is vibration occurring specifically under acceleration. These vibrations are typically felt through the entire body shell rather than just the steering wheel, distinguishing them from unbalanced tyres. Another common symptom is a rhythmic thumping noise that increases with road speed, especially noticeable when the engine is under load uphill or carrying heavy cargo. It is also vital to inspect the CV boot regularly. If the boot is split or has come loose, the lubricating grease is thrown out, while road grit and moisture enter the joint. This accelerates the breakdown of the hardened steel surfaces inside the joint, quickly leading to complete failure.

How to choose the correct inner CV joint

Selecting the correct inner CV joint for an Audi A4 Avant 2.7 TDI can be complex, as variations often exist depending on whether the car has a manual or automatic gearbox, as well as the exact production date. To ensure you receive a part with an exact fit, the most reliable method is to filter by your car's make, model and engine variant. When inspecting the parts, pay close attention to technical specifications such as the spline count on the stub shaft entering the gearbox and the outer diameter of the joint housing itself. At CVJoint24, we offer an accurate fitment guarantee, giving you complete peace of mind when ordering. By choosing a part that matches the original equipment specification exactly, you safeguard your car's factory performance and reliability.

Related parts to inspect

We recommend also checking these exact pages for the same car when working on the inner CV joint:

When a drivetrain component wears out, surrounding parts on the vehicle often require inspection as well. Comparing these exact pages for the Audi A4 Avant 2.7 TDI makes it easier to determine whether an issue lies with the inner CV joint itself or another related section of the driveline.

This is particularly relevant on models where vibrations, play and noises can transfer between multiple components in the drivetrain. A quick check of related categories reduces the risk of replacing the right type of part while overlooking an adjacent component that causes the same symptom.

By taking a proactive approach and replacing worn parts at the same time, you reduce the risk of future workshop visits and ensure the entire drivetrain operates in perfect harmony.

Why buy from CVJoint24?

CVJoint24 is more than just an online shop; we are the international shop of a Swedish driveline specialist, focusing deeply on driveshafts and power transmission components from our central warehouse in Helsingborg, Sweden. Our expertise spans decades, and we have built a product range that combines vast coverage with comprehensive technical knowledge. When you buy an inner CV joint for your Audi from us, you can rely on a component thoroughly tested to withstand harsh European roads and challenging winters. We provide added value through our fitment guarantee, technical advice and rapid dispatch across the EU to minimise your car's downtime. Our approach is straightforward: offering the best balance of price, quality and specialist know-how so you always receive the right part with complete confidence.

Frequently asked questions about inner CV joints for Audi A4 Avant 2.7 TDI

What are the most common signs of a failing inner CV joint on an Audi A4 Avant 2.7 TDI?

The most common symptoms are vibrations through the car's body during acceleration, especially at higher speeds, as well as clunking noises from the drivetrain.

Can I replace just the CV boot if the joint is still working?

Yes, if you detect damage to the CV boot early before dirt has entered or the grease has completely leaked out, you can save the CV joint by simply replacing the boot and repacking it with fresh grease.

How do I make sure I select the right inner CV joint for my Audi A4?

The most reliable way is to use our vehicle selector and choose your car's exact make, model and engine. This filters out the parts that fit your car's engine and gearbox specification perfectly.

Does the inner CV joint differ between manual and automatic gearboxes on the 2.7 TDI?

Yes, there can be differences in dimensions and spline counts depending on the gearbox type. Always verify the specifications against your vehicle's details.

Does the inner CV joint come with everything needed for the replacement?

Yes, our CV joint kits are normally supplied complete with the joint, CV boot, grease, clamps, and any mounting hardware required for installation.

How does a worn inner CV joint affect driving safety?

A severely worn joint can ultimately fail completely, leading to a total loss of drive. Over time, the vibrations can also cause premature wear to the gearbox bearings.