Inner CV joints for BMW 1 Serie

Find the right inner CV joint for your BMW 1-serie by filtering through our extensive range. To ensure you choose parts that match your vehicle's exact technical specifications, simply...

Choose version

Choose a version to refine the results and get closer to the right product.

Products for Inner CV joints for BMW 1 Serie

186 products
73 - 96 of 186
Item no.:0477076
  • Position: Rear, Inner
  • Inner splines: 24
  • Outer diameter: 92 mm
Item no.:647440
  • Position: Rear, Inner
  • Inner splines: 24
  • Total length: 24 mm
  • Thread size: M24X1,5
Item no.:645862
  • Position: Rear, Inner
  • Inner splines: 24
  • Seal diameter: 69,3 mm
  • Total length: 119 mm
  • Outer splines: 27
Item no.:645342
  • Position: Rear, Inner
  • Inner splines: 24
  • Joint diameter: 92 mm
  • Thread size: M24X1,5
Item no.:249806
  • Position: Front right, Inner
  • Inner splines: 24
  • Splines gearbox side: 27
  • Seal diameter: 29,97 mm
  • Total length: 474,5 mm
Item no.:645852
  • Position: Rear, Inner
  • Inner splines: 25
  • Seal diameter: 43,9 mm
  • Total length: 147 mm
  • Outer splines: 27
Item no.:646323
  • Position: Rear, Inner
  • Inner splines: 25
  • Splines gearbox side: 25
  • Seal diameter: 57,4 mm
  • Total length: 133 mm
Item no.:648215
  • Position: Rear, Inner
  • Inner splines: 25
  • Total length: 26 mm
Item no.:646588
  • Position: Rear, Inner
  • Inner splines: 25
  • Splines gearbox side: 27
  • Seal diameter: 69 mm
  • Total length: 126 mm
Item no.:0489222
  • Position: Rear, Inner
  • Inner splines: 25
  • Outer diameter: 100 mm
Item no.:0491320
  • Position: Rear, Inner
  • Inner splines: 28
  • Outer diameter: 108 mm
Item no.:649879
  • Position: Rear, Inner
  • Inner splines: 25
  • Seal diameter: 86 mm
  • Joint diameter: 99 mm
Item no.:648939
  • Position: Rear, Inner
  • Inner splines: 24
  • Splines gearbox side: 27
  • Total length: 142 mm
  • ABS teeth: 24
Item no.:643454
  • Position: Rear, Inner
  • Inner splines: 30
  • Splines gearbox side: 27
  • Total length: 175 mm
Item no.:641576
  • Position: Rear, Inner
  • Inner splines: 24
  • Total length: 24 mm
  • Thread size: M24X1,5
Item no.:0420247
  • Position: Front left, Inner
  • Inner splines: 24
  • Seal diameter: 44 mm
  • Total length: 184 mm
  • Joint diameter: 82 mm
Item no.:149730
  • Position: Front left, Inner
  • Inner splines: 24
  • Splines gearbox side: 27
  • Total length: 483 mm
Item no.:0488568
  • Position: Rear, Inner
  • Inner splines: 24
  • Outer diameter: 92 mm
Item no.:647832
  • Position: Rear, Inner
  • Inner splines: 24
  • Total length: 24 mm
  • Thread size: M24X1,5
Item no.:644010
  • Position: Rear, Inner
  • Inner splines: 24
  • Seal diameter: 69,3 mm
  • Total length: 119 mm
  • Outer splines: 27
Item no.:644660
  • Position: Rear, Inner
  • Inner splines: 24
  • Joint diameter: 92 mm
  • Thread size: M24X1,5
Item no.:248126
  • Position: Front right, Inner
  • Inner splines: 24
  • Splines gearbox side: 27
  • Seal diameter: 29,97 mm
  • Total length: 474,5 mm
Item no.:644431
  • Position: Rear, Inner
  • Inner splines: 25
  • Splines gearbox side: 25
  • Seal diameter: 57,4 mm
  • Total length: 133 mm
Item no.:642139
  • Position: Rear, Inner
  • Inner splines: 25
  • Total length: 26 mm
Showing 73–96 of 186 products

Inner CV joints for BMW 1 Serie

Maintaining the drivetrain on a BMW 1 Serie demands high-quality components to match the car's sporting character and engineering precision. The inner CV joint is a vital element of power transmission that is often overlooked in favour of the outer joint, yet its role is just as critical. We supply a specialist selection of inner CV joints tailored specifically for the different generations of the BMW 1 Serie. Whether you drive a rear-wheel-drive model or an xDrive all-wheel-drive variant, the correct fit is essential to prevent vibration and unnecessary wear on the gearbox. With our dedicated range in this category, we ensure you find the right part for your specific engine.

What does the inner CV joint do on a BMW 1 Serie?

The inner constant velocity joint is mounted closest to the gearbox or differential and transmits engine torque directly to the drive shaft. Unlike the outer CV joint, which must accommodate steering angles, the inner joint handles the axial movement that occurs as the suspension travels up and down. On a BMW 1 Serie, this is crucial for maintaining composed roadholding and direct power delivery. If the joint is not working optimally, drive delivery becomes uneven, noticeably compromising how the car accelerates under load. It acts as an articulating plunge joint, allowing the drive shaft to alter in length over road undulations without losing connection to the transmission.

Common signs of wear

Wear in an inner CV joint typically presents differently from an outer joint. The most frequent symptom is body vibration under acceleration, often noticeable between 50 and 90 km/h. Unlike wheel imbalance, which tends to shake the steering wheel, inner joint vibrations are felt through the cabin floor or the seat. Another telltale sign is a dull thud or clunk when applying or lifting off the throttle. If the CV boot splits, grease escapes and road dirt enters, quickly leading to premature failure on your BMW 1 Serie. Ignoring these warning signs can result in secondary damage to both the gearbox output seals and the wheel bearings.

Choosing the right inner CV joint

Selecting the correct replacement for a BMW 1 Serie can be tricky because specifications vary depending on engine output, gearbox type, and whether the car features four-wheel drive. You should always verify the spline counts on both the gearbox side and the driveshaft side, as well as the outer diameter of the joint housing. To make the process straightforward, simply select your car's make, model, and engine variant in our catalogue. This filters out incompatible options and presents the exact components designed for your car. Fitting the right inner CV joint from the start saves workshop time and guarantees long service life. Always check whether your model requires a specific retaining bolt or circlip, both of which are supplied in our complete kits.

Related parts to check

We recommend inspecting these matching categories for your vehicle while working on the inner CV joint:

When one drivetrain component shows signs of wear, neighbouring parts on the same vehicle should be inspected as well. Comparing these exact pages for the BMW 1 Serie makes it easier to determine whether the issue originates in the inner CV joint itself or another related section of the driveline.

This is especially true on models where vibrations, play, and driveline knock can mask other faults across the assembly. A quick check of related categories reduces the risk of replacing one correct part while overlooking another worn component that produces the same symptoms.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist with its central warehouse in Helsingborg, Sweden, shipping quality components across the EU. We understand the importance of technical accuracy and offer unmatched category depth for BMW 1 Serie power transmission. By focusing on specialist driveline parts rather than a broad, generic catalogue, we provide high product relevance backed by expert support. Our database lets you filter reliably by make, model, and engine, minimising the risk of incorrect orders. When you choose CVJoint24, you receive OE-matching components delivered by a team that knows drivetrains inside and out, fully prepared for European roads and conditions.

Frequently asked questions about inner CV joints for BMW 1 Series

How do I know if the inner CV joint on my BMW 1 Series is faulty?

The most common sign is vibration through the car during acceleration, particularly at speeds between 50 and 90 km/h. Unlike outer CV joints that click while cornering, worn inner constant velocity joints cause juddering or shaking through the car body.

Can I replace just the inner CV joint, or do I need to replace the entire drive shaft?

You can easily replace just the inner CV joint if the rest of the drive shaft is in good condition. We supply complete kits with joint, CV boot and grease to make the replacement straightforward.

Does the same inner CV joint fit all BMW 1 Series models?

No, it varies depending on engine size, gearbox type and whether the car has xDrive. Always select your car's make, model and engine to find the exact match for your vehicle.

Why does my BMW 1 Series vibrate under acceleration?

Vibrations under acceleration are a classic symptom of a worn inner CV joint. When play develops within the joint, it can no longer centre the drive shaft properly under load, creating an imbalance.

Are the CV boot and grease included when I buy an inner CV joint from you?

Yes, our inner CV joints are supplied as complete repair kits, including the joint, model-specific CV boot, premium-grade grease and all necessary mounting hardware.