Inner CV joints for Hyundai Santa FE

Searching for a high-quality inner CV joint for your Hyundai Santa FE? At CVJoint24, your Swedish driveline specialist, you will find a comprehensive range tailored to your exact model....

Products for Inner CV joints for Hyundai Santa FE

44 products
25 - 44 of 44
Item no.:144412
  • Position: Inner
  • Inner splines: 33
  • Seal diameter: 33 mm
  • Total length: 170 mm
  • Joint diameter: 87 mm
Item no.:244036
  • Position: Front right, Inner
  • Inner splines: 33
  • Seal diameter: 42 mm
  • Total length: 132 mm
  • Joint diameter: 87 mm
Item no.:249680
  • Position: Inner
  • Inner splines: 35
  • Seal diameter: 42 mm
  • Total length: 132 mm
  • Joint diameter: 90 mm
Item no.:147368
  • Position: Front left, Inner
  • Inner splines: 35
  • Outer splines: 31
  • Splines wheel side: 31
Item no.:140404
  • Position: Inner
  • Inner splines: 35
  • Splines gearbox side: 31
  • Seal diameter: 36 mm
  • Outer diameter: 90 mm
Item no.:140673
  • Position: Inner
  • Inner splines: 33
  • Seal diameter: 33 mm
  • Total length: 170 mm
  • Joint diameter: 87 mm
Item no.:247302
  • Position: Front right, Inner
  • Inner splines: 33
  • Seal diameter: 42 mm
  • Total length: 132 mm
  • Joint diameter: 87 mm
Item no.:249807
  • Position: Inner
  • Inner splines: 35
  • Seal diameter: 42 mm
  • Total length: 132 mm
  • Joint diameter: 90 mm
Item no.:141312
  • Position: Front left, Inner
  • Inner splines: 35
  • Outer splines: 31
  • Splines wheel side: 31
Item no.:147564
  • Position: Inner
  • Inner splines: 35
  • Splines gearbox side: 31
  • Seal diameter: 36 mm
  • Outer diameter: 90 mm
Item no.:142773
  • Position: Inner
  • Inner splines: 33
  • Seal diameter: 33 mm
  • Total length: 170 mm
  • Joint diameter: 87 mm
Item no.:248924
  • Position: Front right, Inner
  • Inner splines: 33
  • Seal diameter: 42 mm
  • Total length: 132 mm
  • Joint diameter: 87 mm
Item no.:241192
  • Position: Inner
  • Inner splines: 35
  • Seal diameter: 42 mm
  • Total length: 132 mm
  • Joint diameter: 90 mm
Item no.:146735
  • Position: Front left, Inner
  • Inner splines: 35
  • Outer splines: 31
  • Splines wheel side: 31
Item no.:143024
  • Position: Inner
  • Inner splines: 35
  • Splines gearbox side: 31
  • Seal diameter: 36 mm
  • Outer diameter: 90 mm
Item no.:147729
  • Position: Inner
  • Inner splines: 33
  • Seal diameter: 33 mm
  • Total length: 170 mm
  • Joint diameter: 87 mm
Item no.:243140
  • Position: Front right, Inner
  • Inner splines: 33
  • Seal diameter: 42 mm
  • Total length: 132 mm
  • Joint diameter: 87 mm
Item no.:249709
  • Position: Inner
  • Inner splines: 35
  • Seal diameter: 42 mm
  • Total length: 132 mm
  • Joint diameter: 90 mm
Item no.:144679
  • Position: Inner
  • Inner splines: 33
  • Seal diameter: 33 mm
  • Total length: 170 mm
  • Joint diameter: 87 mm
Item no.:245791
  • Position: Inner
  • Inner splines: 35
  • Seal diameter: 42 mm
  • Total length: 132 mm
  • Joint diameter: 90 mm
Showing 25–44 of 44 products

Inner CV joints for Hyundai Santa FE

The Hyundai Santa FE is a robust SUV that requires top-quality components to maintain its performance and safety on the road. The inner CV joint is a critical part of your vehicle's drivetrain, and here at CVJoint24 you will find a carefully selected range tailored specifically to this model. With an extensive selection, we cover most Santa FE generations and engine options. Choosing the correct inner CV joint is not just about keeping the car rolling; it is about eliminating vibrations and ensuring the gearbox is not subjected to unnecessary strain.

As drivetrain specialists, we understand the specific demands placed on an all-wheel-drive or front-wheel-drive Hyundai. By focusing on precise fitment and superior material quality, we help you prolong the service life of your car's drivetrain. Whether you carry out the repair yourself or take your car to a garage, the right spare part is the foundation for a successful job. Our parts are manufactured to meet or exceed original equipment specifications, which is particularly vital for a heavier vehicle like the Santa FE that often encounters demanding driving conditions.

What does the inner CV joint do on a Hyundai Santa FE?

The inner CV joint on a Hyundai Santa FE is fitted closest to the gearbox or differential. Its primary role is to transfer torque from the engine to the drive shafts whilst accommodating up-and-down suspension movement. Unlike the outer CV joint, which must cope with large steering angles, the inner constant velocity joint focuses primarily on handling plunge or axial movement—the change in drive shaft length as the wheels travel vertically over uneven surfaces. This is an exacting technical task that requires precision engineering.

In a heavier car like the Santa FE, these components endure substantial forces, especially during hard acceleration or when carrying heavy loads. The inner joint is typically a tripod joint design, which delivers smooth, supple power delivery. If this component begins to fail, the entire vehicle's driving dynamics are impaired. Understanding its role makes it clear why early warning signs of wear should never be ignored, as a defective inner joint can lead to consequential damage to both the gearbox and suspension over time.

Common signs of wear

The symptoms of a failing inner CV joint differ markedly from the classic clicking sound of an outer joint on full steering lock. On a Hyundai Santa FE, the most common indicator of wear in the inner joint is vibration occurring specifically under acceleration. These vibrations are often felt throughout the entire bodyshell and can be mistaken for unbalanced tyres; however, they distinguish themselves by disappearing the moment you lift off the accelerator. This happens because the joint can no longer centre the shaft correctly under load.

Another symptom is a dull clunking or thumping noise when shifting between drive and reverse, or when transitioning from engine braking to acceleration. It is also essential to inspect the CV boot; if it is split, grease escapes and road dirt enters, quickly destroying the internal bearing surfaces. Because the Santa FE is regularly used for long motorway journeys and light off-road driving, noticing these vibrations early is critical. Ignoring the signs can eventually lead to the driveshaft pulling out or excessive vibration ruining the gearbox output seals.

How to choose the correct inner CV joint

Identifying the exact inner CV joint for your Hyundai Santa FE can be tricky, as specifications vary depending on the model year, engine type, and whether the vehicle is equipped with all-wheel drive (AWD) or front-wheel drive (2WD). The key differences between joint variants lie primarily in the number of splines (teeth) on both the internal and external sections, as well as the diameter of the seal surface. Fitting the wrong part can lead to installation issues or persistent fluid leaks.

To help you select the right part first time, our shop allows you to easily filter by your car's make, model and engine. We nevertheless recommend checking the spline count on your old unit if you are in any doubt, particularly where multiple technical variants exist for the same model year. Our database is exceptionally precise and covers most Santa FE variants across European roads. Choosing a model-specific part from a specialist guarantees a hassle-free fit without the need for modifications.

Related parts to check

Be sure to check these related pages for the same vehicle when working on the inner CV joint:

When a drivetrain component develops wear, nearby parts on the vehicle often warrant inspection too. By comparing these dedicated pages for the Hyundai Santa FE, it becomes much easier to determine whether an issue lies with the inner CV joint itself or another adjoining section of the transmission.

This is particularly relevant for models where vibrations, play and unwanted noises can transfer symptoms across several driveline components. A quick look over related categories reduces the risk of replacing one correct part while overlooking an adjacent component that contributes to the very same problem.

Carrying out a thorough inspection of your vehicle's driveline ensures dependable driving for many kilometres to come. Replacing an inexpensive CV boot in good time can save hundreds of pounds in major repairs later on. We are here to help you source every part you need for a comprehensive drivetrain overhaul.

Why shop with CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, backed by in-depth technical expertise and a dedicated parts range few can rival. When you buy an inner CV joint for your Hyundai Santa FE from us, you receive not just a quality spare part, but the confidence of our accurate fitment guarantee. We know how frustrating it is to have your car dismantled only to find a part does not fit—which is why we continually refine our vehicle application data.

With prompt dispatch across the EU from our central warehouse in Helsingborg, Sweden, we keep your vehicle's downtime in the garage to a minimum. Our commitment to quality means we only supply car parts we trust ourselves, offering you a durable solution at a competitive price. Choose a specialist that understands your vehicle's drivetrain inside out, guiding you from vehicle selection right through to delivery. We take pride in being the reliable choice for drivers who demand the very best for their Hyundai.

Frequently asked questions about inner CV joints for Hyundai Santa FE

How do I know if the inner CV joint is worn on my Santa FE?

The most common sign is shuddering or vibrations through the car body under acceleration that disappear when you ease off the throttle. Unlike outer CV joints, they rarely produce clicking noises when cornering.

Can I replace just the inner CV joint, or must I replace the entire shaft?

You can easily replace just the inner CV joint, provided the rest of the drive shaft is straight and undamaged. We supply individual inner joints that come complete with grease and a CV boot.

Do all inner CV joints fit every Santa FE model?

No, specifications such as spline count and diameter vary depending on the engine variant and model year. Always use our vehicle selector to choose your make, model and engine to find the correct part.

Why is my Hyundai Santa FE vibrating during acceleration?

Vibrations during acceleration are frequently caused by worn tripod bearings or pitted housing tracks inside the inner CV joint, creating imbalance as power is transferred to the wheels.

Are grease and a CV boot included when I buy an inner CV joint?

Yes, our inner CV joints are supplied as complete kits containing the joint itself, a vehicle-specific CV boot, premium grease, and all necessary mounting hardware.

How long does delivery take for a CV joint?

We aim to dispatch all in-stock items swiftly from our warehouse. If you order in good time, your inner CV joint is normally dispatched the same working day for prompt delivery across Europe.