Inner CV joints for Toyota Yaris Vitz
Find the right inner CV joint for your Toyota Yaris Vitz. By selecting your exact make, model and engine, you ensure you receive a component technically matched to your petrol...
Products for Inner CV joints for Toyota Yaris Vitz
- Position: Inner
- Seal diameter: 34 mm
- Inner splines: 20
- Outer splines: 23
- Position: Front, Inner
- Inner splines: 20
- Inner diameter: 19 mm
- Total length: 91 mm
- Splines gearbox side: 23
Inner CV joints for Toyota Yaris Vitz
Maintaining the drivetrain on your Toyota Yaris Vitz is crucial for both driving safety and comfort. The inner CV joint plays a central role in this system by transferring power from the gearbox to the drive shaft, while simultaneously accommodating the movement that occurs as the car's suspension works. For a compact car such as the Yaris Vitz, which is frequently used in stop-start city traffic, these components are exposed to continuous stress. Choosing a high-quality replacement part is therefore a worthwhile investment in the vehicle's longevity.
At CVJoint24, we understand the importance of an exact fit. Because the Toyota Yaris Vitz can vary in specification depending on engine choice and gearbox type, it is vital not to guess when choosing the right part. Our range is carefully selected to meet the exact technical specifications for your specific car model, minimising the risk of vibrations and future breakdowns. By focusing on quality, we ensure your vehicle maintains its dependable performance for many kilometres to come.
What does an inner CV joint do on a Toyota Yaris Vitz?
The inner CV joint, often referred to as a tripod joint or plunge joint, is mounted closest to the gearbox. Its primary job is to transfer torque from the engine to the drive shafts regardless of the angle the shaft forms relative to the gearbox. Unlike the outer CV joint, which primarily accommodates steering angles, the inner constant velocity joint must be able to plunge axially (move in and out). This is necessary because the distance between the gearbox and the wheel hub changes whenever the car drives over bumps or when the suspension compresses.
On a Toyota Yaris Vitz, this system is optimised to deliver smooth, vibration-free travel. If the inner joint fails to operate properly, the driving dynamics of the entire car suffer. The inner joint runs in a bath of specialised grease and is protected by a rubber CV boot. If the boot tears, dirt gets in and grease leaks out, rapidly causing the internal rollers or bearings to wear out. That is why it is essential to act as soon as you suspect a problem in this part of the drivetrain.
Common signs of wear
The symptoms of a failing inner CV joint often differ from the signs of a faulty outer joint. While an outer CV joint typically produces a clicking noise at full steering lock, a worn inner joint usually manifests as vibrations. These vibrations are commonly felt through the car body or the seat, rather than in the steering wheel, and occur primarily under acceleration or when the engine is under heavy load on inclines.
Another common sign is that the vibrations vanish as soon as you lift off the accelerator and let the car coast freely. This happens because the mechanical load on the joint's internal components is relieved. If you notice your Toyota Yaris Vitz shaking during acceleration, you should inspect the inner CV joints and their CV boots immediately. A boot leak caught early can sometimes be sorted out with a thorough clean and fresh grease, but if vibrations have already started, it typically indicates that the joint itself has suffered permanent damage and requires replacement.
How to choose the right inner CV joint
Finding the correct inner CV joint for your Toyota Yaris Vitz requires precision. Several factors can vary between different versions of the model, such as the spline count on the shaft, the joint diameter, and the way it mounts into the gearbox. Even if two joints appear identical in photos, small differences in millimetre dimensions mean they may not fit or could even damage the gearbox during installation.
The most reliable way to identify the right part is to select your car's make, model and engine in our vehicle selector. Choosing your exact model filters out all components except those technically verified for your specific car. We also recommend checking whether it might be more economical to replace the complete drive shaft, which can often save on labour costs compared to changing solely the inner joint. Always check that the new joint comes supplied with the correct grease, CV boot and fitting hardware for a complete installation.
Related parts to inspect
Feel free to check these specific pages for the same vehicle when working on your inner CV joint:
When one drivetrain component shows signs of wear, it is common for neighbouring parts on the same car to require attention too. By checking these exact pages for the Toyota Yaris Vitz, it is easier to determine whether the issue lies specifically with the inner CV joint or with an adjoining section of the drivetrain.
This is particularly relevant on models where vibrations, play and noises can make symptoms appear to originate from multiple parts across the drivetrain. A quick check of related categories reduces the risk of replacing the right type of part while overlooking an adjacent component that contributes to the same fault.
By conducting a comprehensive inspection of your Toyota Yaris Vitz, you ensure the drivetrain remains efficient, quiet and reliable.
Why buy from CVJoint24?
CVJoint24 is the international shop of a Swedish driveline specialist. By dedicating ourselves to this specific area, we provide deeper technical expertise and a more precise range than general car parts retailers. When you buy an inner CV joint for your Toyota Yaris Vitz from us, you can be confident that you receive a component meeting strict standards for quality and fitment.
Our strength lies in helping customers find the right part straight away. With accurate filtering by make, model and engine, backed by extensive stock in our warehouse in Helsingborg, Sweden, we minimise the risk of incorrect orders and long waits. We dispatch reliably across the EU to ensure your car stays roadworthy, whether you are a DIY mechanic or running a professional garage. Choose a specialist who understands your vehicle's drivetrain inside out – choose CVJoint24 for your spare parts needs.
Frequently asked questions about inner CV joints for Toyota Yaris Vitz
What are the most common symptoms of a failing inner CV joint on a Toyota Yaris Vitz?
The most common symptom is vibration through the car body during acceleration. Unlike outer CV joints, you rarely hear clicking sounds when cornering; the issue usually shows up as shaking under engine load.
Can I replace just the inner CV joint, or do I need to replace the entire drive shaft?
You can often replace just the inner CV joint if the rest of the drive shaft is in good condition. However, if the shaft is rusted or the outer joint is also worn, replacing the complete drive shaft on your Toyota Yaris Vitz can be more cost-effective.
How do I make sure I choose the right inner CV joint for my car?
The most reliable way is to select your car's make, model, and engine variant in our search filter. This filters out parts specifically tailored to your vehicle's engine, gearbox, and model year.
Why does my Toyota Yaris Vitz only vibrate when accelerating?
This is a classic sign of a worn inner CV joint. When you accelerate, load is placed on the joint's internal components, and any play or damage creates vibrations that spread throughout the car.
Are the CV boot and grease included when I buy an inner CV joint from you?
Yes, our inner CV joints are supplied as complete kits with a CV boot, specialised grease, and the necessary fitting hardware to ensure a correct installation on your Toyota Yaris Vitz.