Inner CV joints for Volkswagen Sharan

Find the correct inner CV joint for your Volkswagen Sharan, whether your MPV is front-wheel drive or four-wheel drive. Our range covers components for a wide selection of engines, from...

Choose version

Choose a version to refine the results and get closer to the right product.

Products for Inner CV joints for Volkswagen Sharan

90 products
49 - 72 of 90
Item no.:3439328
  • Position: Inner
  • Inner splines: 28
  • Outer diameter: 102 mm
  • Splines wheel side: 26
Item no.:241648
  • Position: Front right, Inner
  • Inner splines: 28
  • Splines gearbox side: 35
  • Seal diameter: 42 mm
  • Total length: 100 mm
Item no.:142242
  • Position: Front left, Inner
  • Inner splines: 28
  • Splines gearbox side: 26
  • Seal diameter: 40 mm
  • Total length: 160 mm
Item no.:0472710
  • Position: Front right, Inner
  • Total length: 129 mm
  • Outer splines: 26
Item no.:347380
  • Position: Inner
  • Inner splines: 34
  • Splines gearbox side: 35
Item no.:346780
  • Position: Inner
  • Inner splines: 34
  • Total length: 33 mm
  • Joint diameter: 112 mm
  • Outer splines: 34
Item no.:0425262
  • Position: Inner
  • Inner splines: 34
  • Seal diameter: 123 mm
  • Total length: 84 mm
  • Joint diameter: 104 mm
Item no.:343574
  • Position: Front, Inner
  • Inner splines: 28
  • Seal diameter: 108 mm
  • Total length: 32 mm
  • Joint diameter: 108 mm
Item no.:0426837
  • Position: Inner
  • Inner splines: 28
  • Seal diameter: 42 mm
  • Outer splines: 35
Item no.:0461141
  • Position: Front, Inner
  • Inner splines: 34
  • Outer diameter: 112 mm
Item no.:3443355
  • Position: Inner
  • Inner splines: 28
  • Outer diameter: 102 mm
Item no.:3452209
  • Position: Inner
  • Inner splines: 28
  • Outer diameter: 102 mm
  • Splines wheel side: 26
Item no.:242350
  • Position: Front right, Inner
  • Inner splines: 28
  • Splines gearbox side: 35
  • Seal diameter: 42 mm
  • Total length: 100 mm
Item no.:144512
  • Position: Front left, Inner
  • Inner splines: 28
  • Splines gearbox side: 26
  • Seal diameter: 40 mm
  • Total length: 160 mm
Item no.:0427304
  • Position: Front right, Inner
  • Total length: 129 mm
  • Outer splines: 26
Item no.:348065
  • Position: Inner
  • Inner splines: 34
  • Splines gearbox side: 35
Item no.:344856
  • Position: Inner
  • Inner splines: 34
  • Total length: 33 mm
  • Joint diameter: 112 mm
  • Outer splines: 34
Item no.:0440733
  • Position: Inner
  • Inner splines: 34
  • Seal diameter: 123 mm
  • Total length: 84 mm
  • Joint diameter: 104 mm
Item no.:343517
  • Position: Inner
  • Inner splines: 28
  • Seal diameter: 108 mm
  • Total length: 32 mm
  • Joint diameter: 108 mm
Item no.:0488569
  • Position: Inner
  • Inner splines: 28
  • Seal diameter: 42 mm
  • Outer splines: 35
Item no.:0476018
  • Position: Front, Inner
  • Inner splines: 34
  • Outer diameter: 112 mm
Item no.:3473879
  • Position: Inner
  • Inner splines: 28
  • Outer diameter: 102 mm
Item no.:3487421
  • Position: Inner
  • Inner splines: 28
  • Outer diameter: 102 mm
  • Splines wheel side: 26
Item no.:244539
  • Position: Front right, Inner
  • Inner splines: 28
  • Splines gearbox side: 35
  • Seal diameter: 42 mm
  • Total length: 100 mm
Showing 49–72 of 90 products

Inner CV joints for Volkswagen Sharan

The Volkswagen Sharan is a spacious, heavy vehicle, which places exceptionally high demands on its drivetrain and power transmission. The inner CV joint plays a central role in transferring power from the gearbox out to the drive shafts and on to the wheels. Here at CVJoint24 you will find an extensive range of inner CV joints, specifically matched to the various engine options and gearbox types across the Sharan range. Choosing the correct component is critical to prevent unnecessary wear on other parts of the system. As specialists in the Volkswagen Sharan, we understand the technical challenges of this platform, especially regarding inner joints that are often subjected to steep operating angles and heavy loads under acceleration when fully laden. Our range covers everything from early model years to the latest versions, ensuring you always find the right spare parts for your needs.

What does the inner CV joint do on a Volkswagen Sharan?

The inner CV joint on a Volkswagen Sharan is mounted directly to the gearbox or via a flange connection. Unlike the outer constant velocity joint, which mainly accommodates steering angles at the front wheels, the inner joint's main task is to allow the drive shaft to plunge in and out as the suspension moves up and down. This movement is called axial plunge and is essential for maintaining smooth power delivery on any road surface. This is particularly vital on a vehicle such as the Sharan, which frequently carries heavy loads of passengers and luggage, causing substantial changes in ride height. If the inner joint fails to operate smoothly, it can subject the entire driveshaft to stress, which in the worst cases can damage the gearbox output seals or bearings. Tripod joints are commonly used internally on the Sharan, engineered to deliver smooth, vibration-free power transmission even under high load.

Common signs of wear

One of the most typical signs that an inner CV joint is failing on your Volkswagen Sharan is vibration that appears specifically during acceleration. Unlike wheel imbalance, which is typically noticeable at specific speeds regardless of load, a worn inner joint tends to vibrate most when the engine is putting down torque. You may also notice a clunking noise or chassis shudder at motorway speeds that disappears as soon as you lift off the accelerator. It is also vital to inspect the CV boot regularly; if it has split, grease escapes and road dirt enters, rapidly destroying the precision-machined bearing surfaces inside the joint. Because the Sharan is a heavy vehicle, wear can accelerate quickly once damage sets in. If you experience these symptoms, you should also inspect your outer joint to verify that the overall drive shaft assembly is sound and that no secondary damage has occurred.

How to choose the correct inner CV joint

Identifying the correct inner CV joint can be tricky, as the Volkswagen Sharan has been produced with numerous engine and gearbox combinations over the years, including manual boxes, DSG, Tiptronic, and 4Motion all-wheel drive. What distinguishes the joints is often the spline tooth count both internally and externally, as well as the joint's overall diameter and fitting method. To ensure an exact fit, we always recommend filtering by your car's make, model and engine. This narrows down the parts technically compatible with your specific vehicle and drivetrain. Also check whether your vehicle is fitted with a prop shaft, as is the case on four-wheel-drive models, since this can affect which rear drive shafts and joints are fitted. Sharan owners often need to confirm whether the joint is a bolt-on type or inserts into the gearbox with a circlip, which our technical data helps clarify.

Related parts to check

You may also wish to check these exact pages for the same vehicle when working on the inner CV joint:

When one drivetrain component shows signs of wear, nearby parts on the vehicle often require inspection as well. Comparing these exact pages for the Volkswagen Sharan makes it easier to determine whether the fault lies strictly with the inner CV joint or with an adjacent part of the drivetrain.

This is especially true on models where vibrations, play and noises can transmit symptoms across multiple driveline parts. A quick check of related categories reduces the risk of replacing the right type of part while overlooking an adjacent component that contributes to the problem.

By inspecting these components at the same time, you ensure a long-lasting repair and maintain dependable driving safety for your MPV, saving both time and money in the long run.

Why shop with CVJoint24

CVJoint24 is your dedicated partner for vehicle drivetrains and power transmission. As a Swedish driveline specialist, we focus solely on these components, giving us dedicated expertise and a depth of catalogue that general car parts stores often lack. We understand the necessity of precise fitment, especially on complex vehicles like the Volkswagen Sharan where minor specification differences matter. By selecting your car's make, model and engine in our store, you minimise the risk of ordering the wrong item and get the right part first time. Our mission is to supply high-quality car parts that meet or exceed original equipment standards, giving you complete confidence on the road wherever you travel. With a wide range of dedicated inner CV joints in stock for the Sharan platform, we provide reliable availability, expert technical support and specialist service for drivers across Europe.

Frequently asked questions about inner CV joints for Volkswagen Sharan

How do I know whether it is the inner or outer CV joint that is failing on my Sharan?

Inner CV joints usually cause vibrations throughout the entire car under acceleration, whereas outer joints produce a distinct clicking noise when turning on full lock while driving.

Can I replace just the inner CV joint, or do I have to replace the complete drive shaft?

You can readily replace just the inner joint as long as the splines on the drive shaft itself are undamaged, which is often a far more cost-effective solution than replacing the entire shaft.

Does the same inner CV joint fit both manual and automatic Volkswagen Sharan models?

No, there are often differences in gearbox mounting and dimensions between manual and automatic transmissions (such as DSG). Always select your specific vehicle model and engine to ensure you receive the correct part.

What happens if I continue driving with a worn inner CV joint?

The vibrations can damage the gearbox output bearings and oil seals. In the worst case, the joint can suffer total failure, causing the vehicle to lose drive completely and leave you stranded.

Are the CV boot and grease included when I buy an inner CV joint from you?

Yes, all our inner CV joint kits are supplied complete with a tailored CV boot, specialised grease, clamps, and any circlips or bolts required for installation.

Is it common for inner CV joints to wear out on the Volkswagen Sharan?

Because the Sharan is a heavy vehicle frequently used to carry substantial loads, the inner constant velocity joints are subjected to high stress, making them a relatively common wear item over time.