Inner CV joints for Volvo S60 2.4 D

Searching for a high-quality inner CV joint for your Volvo S60 2.4 D? At CVJoint24, you will find premium drivetrain parts engineered to restore your car's smooth performance and ride...

Products for Inner CV joints for Volvo S60 2.4 D

4 products
1 - 4 of 4
Item no.:146588
  • Position: Front left, Inner
  • Seal diameter: 31 mm
  • Inner splines: 26
  • Diameter: 31 mm
  • Splines gearbox side: 26
Item no.:649630
  • Position: Rear, Inner
  • Seal diameter: 35 mm
  • Inner splines: 29
  • Diameter: 35 mm
  • Splines gearbox side: 26
Item no.:149742
  • Position: Front left, Inner
  • Seal diameter: 36 mm
  • Inner splines: 27
  • Diameter: 36 mm
  • Splines gearbox side: 31
Item no.:147400
  • Position: Front left, Inner
  • Seal diameter: 31 mm
  • Inner splines: 26
  • Diameter: 31 mm
  • Splines gearbox side: 26

Inner CV joints for Volvo S60 2.4 D

The Volvo S60 2.4 D is a car renowned for its robust diesel engine and superb long-distance touring comfort. However, its punchy 2.4-litre engine produces substantial torque, placing immense strain on the drivetrain, especially on the inner CV joint. This vital component ensures engine power reaches the wheels smoothly without power loss or unsettling vibrations. When an inner constant velocity joint begins to wear, it compromises not only ride refinement, but also safety and the operational lifespan of neighbouring parts such as the gearbox and engine mounts. At CVJoint24, we stock an extensive range of Inner CV joints for Volvo S60 specifically engineered to endure the rigorous demands of your Volvo S60 2.4 D. Choosing a premium component from our selection ensures your car retains its factory driving feel and long-term dependability across many kilometres.

What does the inner CV joint do on a Volvo S60 2.4 D?

The inner CV joint on a Volvo S60 2.4 D serves a dedicated purpose within the vehicle's power transmission system. While the outer CV joint facilitates steering, the primary task of the inner joint is to accommodate longitudinal suspension travel along the drive shaft. As the suspension works over uneven surfaces, the distance between the gearbox and the wheel hub is constantly changing. The inner joint, typically a tripod design, allows the driveshaft to plunge in and out smoothly whilst transmitting full driving torque. On a diesel model like the 2.4 D, where peak torque is delivered at low engine speeds, precision engineering is paramount. A properly functioning inner joint reduces friction and heat build-up, preventing harsh vibrations from echoing through the chassis and spoiling passenger comfort.

Common signs of wear

Diagnosing a faulty inner CV joint often requires a keener eye than spotting a failing outer joint. The classic symptom of a worn inner constant velocity joint on a Volvo S60 2.4 D is a distinct shudder or vibration during acceleration, most noticeably between 50 and 90 km/h. These vibrations are usually felt throughout the car body rather than in the steering wheel. If the shaking vanishes the moment you ease off the accelerator, the inner joint is almost certainly the culprit. Another tell-tale symptom is a rhythmic thudding or clicking sound at low speeds. It is also wise to inspect the CV boots regularly; if a boot splits, centrifugal force quickly flings out the grease, leaving the joint dry and unprotected. Without lubrication, rapid metal-to-metal wear leads to severe overheating and complete driveline failure if neglected.

How to select the right inner CV joint

When sourcing a replacement inner CV joint for your Volvo S60 2.4 D, matching the precise technical specification is vital. Throughout production runs, Volvo utilised various drive shaft designs, meaning spline counts and housing dimensions can vary between model revisions. For instance, automatic and manual S60 models often employ distinct inner joints. To ensure you purchase the correct part first time, simply filter by your vehicle's exact make, model and engine variant in our store selector. This pairs your car's exact specifications with fully compatible options. Don't forget to check if you need fresh fitting accessories, such as circlips or hub bolts, as replacing these during installation guarantees a secure and durable repair.

Related components to check

Be sure to inspect these related pages for the same vehicle when working on the inner CV joints:

Whenever a drivetrain component wears out, surrounding parts often show similar signs of fatigue. Comparing these specific pages for the Volvo S60 2.4 D will help you determine whether an issue lies purely within the inner CV joint or stems from another part of the driveline system.

This is especially important on models where vibrations, play and unwanted noises can be transferred between interconnected components. A quick inspection across related categories ensures you do not replace only one worn part while overlooking another that is contributing to the same underlying problem.

By inspecting these components alongside your replacement, you safeguard your Volvo S60 2.4 D for the road ahead and avoid repeating the same labour twice.

Why shop at CVJoint24?

Why turn to CVJoint24 for your Volvo S60 2.4 D? As Swedish driveline specialists, we possess focused technical expertise that general car-part suppliers simply cannot match. Because we concentrate entirely on drivetrain components, we offer a more comprehensive inventory and dependable technical guidance. We know you rely on your car daily, which is why our streamlined warehouse operations ensure fast dispatch throughout the EU. Our fitment guarantee means you can order with absolute confidence, knowing our parts are built to meet or exceed original equipment standards. With competitive prices and premium engineering, CVJoint24 is your trusted partner for a reliable driveline repair.

Frequently asked questions about inner CV joints for Volvo S60 2.4 D

What are the most common symptoms of a failing inner CV joint on a Volvo S60 2.4 D?

The most common signs are vibrations through the car body under acceleration, typically between 50 and 90 km/h, as well as clunking noises when applying throttle.

Can I replace just the inner CV joint, or do I need to replace the entire drive shaft?

On the Volvo S60 2.4 D, it is often possible to replace only the inner joint. However, if the shaft is damaged or workshop labour costs are high, a complete drive shaft can be more cost-effective.

How do I know which inner CV joint fits my S60 2.4 D?

The most reliable method is to select your car's model year and gearbox type in our vehicle selector, as specifications vary depending on the transmission and production year.

Why does my car only vibrate during acceleration?

This is a classic symptom of a worn inner CV joint. When put under load during acceleration, it can no longer properly centre the rotational force, creating an imbalance.

Are a boot and grease included when I buy an inner CV joint?

Yes, at CVJoint24 our inner CV joints are supplied as complete kits including the CV boot, specialist grease, and all necessary fitting accessories.

How long does an inner CV joint last on a Volvo S60?

Service life varies greatly depending on driving style and maintenance, but provided the CV boot remains intact, they can last for well over 200,000 kilometres.