Inner CV joints for Volvo V70 2.4 D5 AWD

Looking for a high-quality inner CV joint for your Volvo V70 2.4 D5 AWD? At CVJoint24, you will find the right driveline components for your all-wheel-drive Volvo. The inner CV joint is...

Products for Inner CV joints for Volvo V70 2.4 D5 AWD

7 products
1 - 7 of 7
Item no.:140121
  • Position: Front left, Inner
  • Seal diameter: 31 mm
  • Inner splines: 26
  • Diameter: 31 mm
  • Splines gearbox side: 26
Item no.:647046
  • Position: Rear, Inner
  • Diameter: 78 mm
  • Outer diameter: 78 mm
  • Splines gearbox side: 24
  • ABS teeth: 24
Item no.:648044
  • Position: Rear, Inner
  • Seal diameter: 35 mm
  • Inner splines: 29
  • Diameter: 35 mm
  • Splines gearbox side: 26
Item no.:140445
  • Position: Front left, Inner
  • Seal diameter: 36 mm
  • Inner splines: 27
  • Diameter: 36 mm
  • Splines gearbox side: 31
Item no.:149499
  • Position: Front left, Inner
  • Seal diameter: 31 mm
  • Inner splines: 26
  • Diameter: 31 mm
  • Splines gearbox side: 26
Item no.:345835
  • Position: Inner
  • Splines gearbox side: 19
  • ABS teeth: 19
Item no.:340662
  • Position: Inner
  • Splines gearbox side: 20
  • ABS teeth: 20

Inner CV joints for Volvo V70 2.4 D5 AWD

Maintaining the drivetrain on a Volvo V70 2.4 D5 AWD is essential for preserving the vehicle's performance and safety. The inner CV joint plays a central role in this system, particularly on all-wheel-drive models where loads can be substantial due to the high torque of the D5 engine. At CVJoint24, you will find inner CV joints engineered specifically to withstand these demands. We understand the importance of an exact fit, which is why our range is tailored to match the technical specifications of your specific Volvo. Choosing the right spare part reduces the risk of secondary damage to the gearbox and other transmission components, saving you money in the long run.

What does the inner CV joint do on a Volvo V70 2.4 D5 AWD?

The inner CV joint on a Volvo V70 2.4 D5 AWD is mounted closest to the gearbox or differential. Its primary job is to transmit power from the engine via the gearbox out to the drive shafts, whilst allowing the shaft to plunge axially. This movement is necessary because the distance between the wheel hub and the gearbox constantly changes as the suspension travels up and down during driving. Unlike the outer CV joint, which accommodates large steering angles, the inner constant velocity joint focuses on absorbing these axial movements using a tripod design or similar mechanism. For an AWD model, this is especially critical because power is distributed across all four wheels, requiring robust, smooth-running components to prevent energy loss and unnecessary wear on the differential.

Common signs of wear

When an inner CV joint begins to wear on a Volvo V70, it typically produces specific symptoms that differ from the clicking noises of a worn outer joint during cornering. The most common sign is vibration through the entire car during acceleration, particularly at speeds between 50 and 90 km/h or when carrying heavy loads. These vibrations occur when the joint can no longer centre the shaft correctly due to play or wear within the internal tracks. Another telltale sign is a dull clunk when lifting off the accelerator or changing gear, pointing to mechanical play in the joint. It is also vital to inspect the CV boot regularly; if it splits, grease escapes and road dirt enters, quickly destroying the internal mechanism and leading to complete failure if not resolved promptly.

How to choose the correct inner CV joint

Selecting the correct inner CV joint for your Volvo V70 2.4 D5 AWD requires care, as several technical variations exist. Differences often depend on the model year and whether the car is fitted with a manual or automatic gearbox. It is crucial to verify the spline count on both the side entering the gearbox and the side connecting to the drive shaft. The diameter of the oil seal surface and the overall length of the joint can also vary between versions. To make this process straightforward, simply select your car's make, model and engine variant in our store. This filters the parts engineered for your exact vehicle configuration, eliminating guesswork and ensuring you receive the correct replacement first time.

Related parts to check

Be sure to check these exact pages for the same vehicle when working on the inner CV joint:

When one drivetrain component shows signs of wear, neighbouring parts on the same car often require inspection as well. Comparing these exact pages for the Volvo V70 2.4 D5 AWD makes it easier to establish whether the fault lies in the inner CV joint or another nearby section of the drivetrain.

This is particularly relevant on models where vibrations, play and noises can transfer between multiple driveline parts. A quick check of related categories minimises the risk of replacing one correct part while overlooking an adjacent component that causes the same symptom.

By inspecting these related parts, you can prevent future issues and ensure your Volvo continues to run smoothly, quietly and free of vibrations for many kilometres to come.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist with its warehouse in Helsingborg, Sweden. We combine in-depth technical expertise with an extensive range of high-quality spare parts selected to withstand tough driving conditions. When shopping with us, you benefit not only from durable car parts but also from our dedicated knowledge of Volvo drivelines. We know that your Volvo V70 2.4 D5 AWD demands high-precision parts to preserve its all-wheel-drive capability. With reliable dispatch across the EU and customer support that understands drive shaft engineering inside out, we are the trusted choice for DIY mechanics and professional garages alike.

Frequently asked questions about inner CV joints for Volvo V70 2.4 D5 AWD

What are the most common symptoms of a failing inner CV joint on a Volvo V70 AWD?

The most common symptom is noticeable vibration through the car under acceleration, particularly at speeds between 50 and 90 km/h. Unlike outer CV joints, inner joints rarely produce clicking noises when cornering.

Can I replace just the inner CV joint, or do I need to replace the entire drive shaft?

On most Volvo V70 2.4 D5 AWD models, you can easily replace just the inner CV joint, provided the drive shaft itself is straight and undamaged.

How do I make sure the CV joint fits my specific Volvo V70 2.4 D5 AWD?

The most reliable way is to select your car's exact make, model and engine variant in our search tool. We verify compatibility against technical data to guarantee a correct fit.

Why is it important to replace a split inner CV boot immediately?

A split CV boot allows the grease to escape while dirt and moisture enter. Without lubrication, the metal inside the joint wears out very quickly, leading to costly repairs.

Are grease and fitting accessories included when I buy an inner CV joint from you?

Yes, our inner CV joints are supplied as complete kits including high-quality grease, a CV boot and the necessary clamps for proper fitting.

Does the inner CV joint differ between manual and automatic gearboxes on the V70 D5?

Yes, there can be differences in both length and spline count depending on the gearbox type. Always check the specifications or filter by your exact vehicle details to ensure compatibility.