Jeep Compass

Spare parts and drivetrain components for the Jeep Compass.

Products for Jeep Compass

56 products
1 - 24 of 56
Item no.:1129807
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 27
  • Total length: 630 mm
Item no.:210865
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 27
  • Total length: 972 mm
Item no.:143697
  • Position: Front left, Inner
  • Inner splines: 34
  • Splines gearbox side: 25
  • Total length: 168 mm
Item no.:246457
  • Position: Front right, Inner
  • Inner splines: 34
  • Splines gearbox side: 25
  • Total length: 536 mm
Item no.:110345
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 27
  • Total length: 619 mm
Item no.:214776
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 27
  • Total length: 954 mm
Item no.:2167584
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 958 mm
Item no.:0693633
  • Outer diameter: 22 mm
  • Diameter: 78 mm
Item no.:119244
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 619 mm
Item no.:0298789
  • Total length: 2,023 mm
  • Number of joints: 3
  • Outer diameter 1: 46 mm
  • Bolt circle diameter 1: 77,8 mm
  • Outer diameter 2: 42,7 mm
Item no.:410420
  • Position: Rear left
  • Splines gearbox side: 23
  • Splines wheel side: 25
  • Total length: 740 mm
Item no.:512111
  • Position: Rear right
  • Splines gearbox side: 23
  • Splines wheel side: 25
  • Total length: 821 mm
Item no.:2192425
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 28
  • Total length: 585 mm
Item no.:1157293
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 28
  • Total length: 625 mm
  • Joint diameter: 91 mm
Item no.:2160238
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 28
  • Total length: 615 mm
  • Joint diameter: 91 mm
Item no.:2181633
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 28
  • Total length: 978 mm
  • Joint diameter: 91 mm
Item no.:218184
  • Splines wheel side: 28
  • Inner splines: 28
  • Total length: 585 mm
Item no.:625503
  • Position: Rear
  • Total length: 1,612 mm
Item no.:115336
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 650 mm
Item no.:415171
  • Position: Rear left
  • Splines gearbox side: 23
  • Splines wheel side: 25
  • Total length: 742 mm
  • Diameter 1: 69 mm
Item no.:515067
  • Position: Rear right
  • Splines gearbox side: 23
  • Splines wheel side: 25
  • Total length: 822 mm
  • Diameter 1: 69 mm
Item no.:214930
  • Splines gearbox side: 28
  • Splines wheel side: 28
  • Total length: 675 mm
Item no.:7311147
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 960 mm
Item no.:359168
  • Position: Outer
  • Inner splines: 33
  • Seal diameter: 59,5 mm
  • Outer splines: 28
  • Thread size: M22X1,5
Showing 1–24 of 56 products

Drivetrain for Jeep Compass

The Jeep Compass is a compact SUV combining the agility of city driving with the brand's legendary off-road capability. Maintaining this versatility demands a drivetrain in first-class condition. The drivetrain is the system responsible for transferring power from the engine to the wheels, and on a Jeep Compass this involves a sophisticated interplay between the gearbox, drive shafts and, on four-wheel-drive variants, a propeller shaft. At CVJoint24, we specialise specifically in these critical components. With a dedicated range tailored to the Compass model, we supply solutions that match or exceed original-equipment standards for durability and precision.

Choosing the correct spare parts for your car's power transmission is not merely a question of performance, but also of safety. A failing drivetrain can cause sudden breakdowns, leaving the vehicle undriveable. By focusing on high-grade components, we ensure your Jeep Compass continues to deliver the dependable performance you expect, whether you drive a front-wheel-drive model or an all-wheel-drive variant.

How the Jeep Compass drivetrain is built

The drivetrain on a Jeep Compass is engineered to manage high torque and the mechanical stresses encountered across varied driving surfaces. Power originates at the engine and gearbox, where it is distributed to the driven wheels via the drive shafts. On four-wheel-drive specifications, a Jeep Compass propeller shaft runs underneath the vehicle to transfer drive to the rear axle. This layout requires every link in the chain—from CV joints to centre bearings—to operate together seamlessly.

The drive shafts feature constant velocity joints that allow the wheels to move with the suspension and turn during steering while transferring power smoothly. These joints are protected by flexible rubber CV boots that retain grease and seal out dirt. If a boot splits, these sensitive mechanical assemblies are quickly exposed to moisture, grit and road salt, resulting in accelerated wear. On the Compass, precise tolerances in these components are essential to prevent vibrations and cabin noise.

Common faults and symptoms

There are several clear warnings that drivetrain components on your Jeep Compass are wearing out. One of the most typical symptoms is a clicking or knocking sound on full steering lock under acceleration. This normally indicates that the outer CV joint on a Jeep Compass drive shaft is failing. If you experience shuddering or vibrations throughout the car under acceleration, the inner CV joint located closer to the gearbox may be worn or out of balance.

On four-wheel-drive models, pay close attention to vibrations originating from the centre or rear of the vehicle. This often points to an out-of-balance prop shaft or worn universal joints. Another frequent issue is grease leaking from damaged drive shaft boots; finding grease splattered inside the wheel rim or beneath the vehicle calls for prompt inspection. Overlooking these signs frequently leads to costlier repairs, as a split CV boot will quickly ruin the entire joint.

Common parts to replace on the Jeep Compass

Within the drivetrain range for the Jeep Compass, drive shafts and prop shafts require the most frequent attention over time. Our catalogue is tailored to cover the essential requirements for this model. We see high demand for complete drive shafts, as replacing the entire assembly is often safer and more cost-effective than changing an individual joint. The most relevant product categories for your car are:

  • Drive shafts for Jeep Compass
  • Propeller shafts for Jeep Compass

Drive shafts endure substantial stress on SUV models such as the Compass, working through wider operating angles and heavier loads than on conventional passenger cars. The propeller shaft is equally critical, especially in harsh European winters where moisture and road salt attack universal joints and centre bearings. Fitting vehicle-specific replacement parts from a dedicated specialist keeps your transmission reliable for many kilometres to come.

How to find the correct part for your Jeep Compass

Browse directly to the relevant subcategory for your Jeep Compass:

With multiple drivetrain components in play, starting in the right section saves time. Comparing the specific categories for the Jeep Compass helps you distinguish whether the issue lies with a drive shaft, CV joint or propeller shaft, directing you to the exact page matching your symptoms and fitment.

Identifying the exact component for your Jeep Compass can sometimes be complex, as technical specifications vary depending on engine size, transmission type (manual or automatic) and whether the car is front-wheel drive or four-wheel drive. The most reliable way to ensure a correct fit is to filter by your vehicle's make, model and engine variant on our website. This narrows down the catalogue to only those products engineered for your specific car.

When choosing components for your drivetrain, remember to verify whether there are differences between the left and right sides, as driveshafts often vary in length. It is also wise to inspect related components such as wheel bearings and ABS rings while the drivetrain is dismantled. If you are ever unsure about your Compass's exact specifications, our technical support team is on hand to help you get the right part first time.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, dispatching orders across the EU from our central warehouse in Helsingborg, Sweden. Unlike general car parts retailers, we offer deep niche expertise focused entirely on power transmission. When you purchase parts for your Jeep Compass from us, you receive components chosen specifically for durability, build quality and precise fitment. We understand the technical details of Jeep drivetrains and know what is needed for components to last.

Our mission is to supply the right part at the right price, backed by sound technical advice. Thanks to our specialist focus on drivelines, we deliver customer support and product knowledge that general suppliers simply cannot match. With straightforward vehicle selection by make, model and engine, rapid EU-wide dispatch and first-class parts, we are the trusted choice for Jeep drivers who expect dependable performance. Choose a specialist that truly knows your car's drivetrain.

Frequently Asked Questions about Drivetrain for Jeep Compass

How do I know if my Jeep Compass needs a new drive shaft?

The most common signs are clicking noises when turning sharply or vibrations during acceleration. If you notice grease leaking from a split CV boot, there is a high risk that the drive shaft will need replacing soon.

Do all drive shafts fit all Jeep Compass models?

No, drive shafts vary depending on the engine, gearbox and whether the vehicle is 2WD or 4WD. Always select your car's make, model and engine to find the exact replacement part.

What is the difference between a drive shaft and a propeller shaft on a Jeep Compass?

The drive shafts are located at the wheels and transmit power directly to them. The propeller shaft is fitted to four-wheel-drive models and runs along the centre of the vehicle to transfer power from the gearbox to the rear axle.

Can I replace just the CV joint instead of the complete drive shaft?

Yes, in many cases this is possible, but on the Jeep Compass it is often more time-efficient and reliable to replace the complete drive shaft, especially if the original shaft has covered high mileage or has been exposed to dirt.

Why should I buy drivetrain parts from CVJoint24?

We are Swedish specialists in driveline components. This means we offer deeper expertise, thorough fitment checks and a more dedicated range than general car-parts retailers.

How often should I check the drivetrain on my Jeep?

We recommend a visual inspection of the CV boots and joints at every service or tyre change. Catching a damaged boot early can save you the cost of a complete drive shaft replacement.