Lancia Lybra

Spare parts and drivetrain components for the Lancia Lybra.

Products for Lancia Lybra

42 products
1 - 24 of 42
Item no.:348308
  • Position: Front, Inner
  • Inner splines: 25
  • Total length: 32 mm
Item no.:343640
  • Position: Inner
  • Inner splines: 25
  • Total length: 32 mm
  • Joint diameter: 100 mm
  • Flange diameter: 100 mm
Item no.:141951
  • Position: Front left, Inner
  • Inner splines: 26
  • Splines gearbox side: 25
  • Seal diameter: 32 mm
  • Total length: 186 mm
Item no.:112868
  • Position: Front left
  • Splines gearbox side: 34
  • Splines wheel side: 25
  • Total length: 510 mm
  • Joint diameter: 98 mm
Item no.:0533128
  • Position: Front, Outer
  • Inner splines: 26
  • Seal diameter: 59 mm
  • Outer splines: 25
  • Thread size: M24X1,5
Item no.:113064
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 25
  • Total length: 572 mm
  • Joint diameter: 92 mm
Item no.:215501
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 25
  • Total length: 980 mm
  • Joint diameter: 92 mm
Item no.:215098
  • Position: Front right
  • Splines wheel side: 25
  • Total length: 525 mm
  • Joint diameter: 98 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:2148125
  • Position: Front right
  • Splines wheel side: 25
  • Total length: 964 mm
  • Joint diameter: 91 mm
  • Joint diameter, gearbox side: 86 mm
Item no.:0623977
  • Total length: 113 mm
Item no.:353364
  • Position: Outer
  • Inner splines: 25
  • Seal diameter: 52 mm
  • Outer splines: 25
  • Thread size: M24X1,5
Item no.:0620692
  • Total length: 113 mm
Item no.:7299831
  • Position: Outer
  • Inner splines: 25
  • Seal diameter: 52 mm
  • Outer splines: 25
  • ABS teeth: 44
Item no.:3525205
  • Position: Outer
  • Inner splines: 22
  • Seal diameter: 51 mm
  • Outer splines: 25
  • Thread size: M24X1,5
Item no.:215623
  • Position: Front right
  • Splines wheel side: 25
  • Total length: 945 mm
  • Joint diameter: 84 mm
  • Tripod shaft diameter: 32 mm
Item no.:1145026
  • Position: Front left
  • Splines gearbox side: 34
  • Splines wheel side: 25
  • Total length: 520 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:1144540
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 25
  • Total length: 592 mm
  • Joint diameter: 89 mm
Item no.:2147812
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 25
  • Total length: 950 mm
  • Joint diameter: 89 mm
Item no.:1159652
  • Position: Front left
  • Splines wheel side: 25
  • Joint diameter: 89 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:2101976
  • Position: Front right
  • Splines wheel side: 25
  • Joint diameter: 89 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:1109655
  • Position: Front left
  • Splines wheel side: 25
  • Total length: 502 mm
  • Flange diameter: 108 mm
Item no.:2167634
  • Position: Front right
  • Splines wheel side: 25
  • Total length: 521 mm
  • Flange diameter: 108 mm
Item no.:2174641
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 25
  • Total length: 934 mm
  • Joint diameter: 91 mm
Item no.:0574069
  • Position: Outer
  • Inner splines: 28
  • Seal diameter: 59 mm
  • Outer splines: 25
  • Thread size: M24 x 1,5
Showing 1–24 of 42 products

Drivetrain for Lancia Lybra

The drivetrain in a Lancia Lybra is a critical element of the car's performance and comfort. Renowned for its elegant styling and refined driving dynamics, the Lybra demands components that uphold high standards. At CVJoint24, we have assembled specific items for this model to meet the most common repair and maintenance needs. By focusing on quality-assured parts, we ensure that power transfer from the gearbox to the wheels takes place without unwanted vibrations or noises. Maintaining the drivetrain is not only a matter of driving enjoyment, but also of safety and preventing costly secondary damage to the gearbox and suspension. Every component in our range is chosen to meet the demands placed on a modern drivetrain.

How the drivetrain is engineered on the Lancia Lybra

The Lancia Lybra uses a traditional front-wheel-drive configuration where the drive shafts play the primary role in transferring torque. The system comprises an inner CV joint connecting to the gearbox and an outer CV joint situated at the wheel hub. These are linked by a robust drive shaft. Rubber CV boots protect the moving parts and retain essential lubrication. On the Lybra, precision tolerances in these components are vital, as even minor discrepancies can quickly cause imbalance. Because this model shares certain technical solutions with other group platforms yet features unique chassis specifications, it is essential to choose parts precisely engineered for the Lybra's specific wheelbase and track width. A smoothly operating drivetrain is key to the refined ride that characterises the model.

Common faults and symptoms

Several clear signs indicate that the drivetrain in your Lancia Lybra is wearing out. One of the most typical symptoms is a clicking or knocking sound on full steering lock, which usually points to a worn outer CV joint. If you instead experience vibrations through the steering wheel or car body under acceleration, this can signal an imbalanced or worn inner CV joint or driveshaft. Another warning sign is grease splattered inside the wheel rim or on the ground beneath the parked car, indicating a split CV boot. Ignoring these warning signs allows road dirt and grit to penetrate the joint, rapidly destroying the precision-ground bearing surfaces and potentially causing a total breakdown on the road.

Common parts to replace on the Lancia Lybra

For the Lancia Lybra, we have identified the most critical components that frequently require attention to maintain reliability. Our range is clearly categorised so you can find what you need without delay:

  • Drive shafts for Lancia Lybra – Complete shafts for a straightforward replacement.
  • Outer CV joints for Lancia Lybra – The most common wear item at the wheel hub.
  • Inner CV joints for Lancia Lybra – To resolve shudder and vibrations during acceleration.
  • CV boots for Lancia Lybra – Protective boots that prolong the life of your constant velocity joints.

By selecting the appropriate category, you can easily navigate to the components tailored to your Lybra's specific engine and model year. We always recommend inspecting the condition of the CV boots during every service to prevent premature failure of more expensive drivetrain parts.

How to find the right part for your Lancia Lybra

Proceed to the correct section for your Lancia Lybra:

On a car with various potential driveline issues, it pays to start directly in the right category. By comparing the specific subcategories for the Lancia Lybra, it becomes straightforward to distinguish between faults in a drive shaft, CV joint or propeller shaft, taking you directly to the page that best addresses your symptoms and fitment needs.

Sourcing the correct spare parts for an Italian car like the Lancia Lybra can sometimes seem tricky due to subtle technical revisions across production years. The most reliable way to ensure an exact fit is to select your car's make, model and engine variant in our search filter. This isolates the parts that are technically compatible with your vehicle. It is nevertheless wise to count the splines (teeth) on your old part whenever possible, as variations occur depending on gearbox type (manual or automatic) and engine size. We provide detailed specifications on every product page to help you verify dimensions and minimise the risk of ordering incorrect car parts, saving both time and expense during repairs. Our catalogue is continually updated to give you accurate matches every time.

Why shop with CVJoint24

CVJoint24 is your dedicated specialist for Lancia Lybra drivetrain components. As the international arm of a Swedish driveline specialist shipping from our central warehouse in Helsingborg, Sweden, we have the technical knowledge required to supply the right parts at competitive prices. We understand the importance of reliable delivery and exact fitment, especially for models where replacement parts can be difficult to source from general motor factors. Our dedicated focus on drivelines allows us to maintain exceptional quality standards and superior stock availability. When you order from us, you receive high-grade spare parts backed by genuine expertise in automotive power transmission. We combine specialist know-how with convenient online shopping to deliver the finest customer experience across the EU.

Frequently Asked Questions about Drivetrain for Lancia Lybra

How do I know if my Lancia Lybra needs a new drive shaft?

The most common signs are vibrations under acceleration or unusual noises while driving. If the vibrations stop as soon as you lift off the accelerator, it is often the inner CV joint or the shaft itself that is worn.

Do all CV joints fit all Lancia Lybra models?

No, there are variations depending on the engine (for example 1.9 JTD vs 2.4 JTD) and gearbox. Always select your vehicle make, model and engine to find the right part.

What is the difference between an inner and an outer CV joint?

The outer CV joint is located by the wheel and accommodates steering movements, whilst the inner joint sits by the gearbox and handles suspension travel. Worn outer joints typically produce a clicking noise when cornering.

Can I replace just the CV boot if it is split?

Yes, if you catch the damage early before dirt and moisture have ruined the joint, you can replace just the CV boot. We stock dedicated CV boot kits for the Lancia Lybra.

How many splines does a Lancia Lybra CV joint have?

The spline count varies between different engine variants. It is important to count the splines on both the inner and outer sides of your old joint to be completely sure of the correct fitment.

Why should I choose CVJoint24 for my Lancia?

We are dedicated driveline specialists offering a broader range and deeper technical expertise than general car parts retailers, ensuring you get the exact right part for your Lybra.