Lancia Ypsilon

Spare parts and drivetrain components for the Lancia Ypsilon.

Products for Lancia Ypsilon

57 products
1 - 24 of 57
Item no.:1123495
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 669 mm
Item no.:2102782
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 918 mm
  • Joint diameter: 79 mm
Item no.:111249
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 522 mm
  • Joint diameter: 79 mm
  • Diameter 1: 79 mm
Item no.:1116056
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 636 mm
  • Joint diameter: 79 mm
Item no.:0635958
  • Outer diameter: 22 mm
  • Diameter: 78 mm
Item no.:217010
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 865 mm
  • Joint diameter: 76 mm
Item no.:115777
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 635 mm
  • Joint diameter: 76 mm
Item no.:0512296
  • Position: Outer
  • Inner splines: 20
  • Seal diameter: 47 mm
  • Outer splines: 22
  • Thread size: M22X1,5
Item no.:359615
  • Position: Outer
  • Inner splines: 22
  • Seal diameter: 51 mm
  • Outer splines: 25
  • Thread size: M24X1,5
Item no.:2161947
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 759 mm
  • Joint diameter: 76 mm
  • Joint diameter, gearbox side: 73 mm
Item no.:1107436
  • Position: Front left
  • Splines wheel side: 22
  • Total length: 613 mm
  • Joint diameter: 73 mm
  • Tripod shaft diameter: 29 mm
Item no.:345621
  • Position: Front, Inner
  • Inner splines: 21
  • Splines gearbox side: 22
  • Seal diameter: 36 mm
  • Total length: 154,5 mm
Item no.:353851
  • Position: Front, Outer
  • Inner splines: 21
  • Seal diameter: 51 mm
  • Outer splines: 22
  • Thread size: M22X1,5
Item no.:1161996
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 621 mm
  • Joint diameter: 82 mm
Item no.:2166741
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 24
  • Total length: 910 mm
Item no.:0503122
  • Position: Front, Outer
  • Inner splines: 25
  • Seal diameter: 51 mm
  • Outer splines: 28
Item no.:0697419
  • Outer diameter: 21 mm
  • Diameter: 76 mm
Item no.:148694
  • Position: Inner
  • Inner splines: 23
  • Splines gearbox side: 23
  • Total length: 180 mm
  • Outer splines: 23
Item no.:245662
  • Position: Inner
  • Inner splines: 23
  • Total length: 480 mm
  • Splines wheel side: 24
Item no.:118072
  • Splines wheel side: 25
  • Total length: 480 mm
  • Thread size: M24x1.5
Item no.:218276
  • Splines wheel side: 25
  • Total length: 505 mm
  • Joint diameter: 83 mm
  • Flange diameter: 100 mm
Item no.:112133
  • Splines wheel side: 25
  • Total length: 485 mm
  • Joint diameter: 83 mm
  • Flange diameter: 100 mm
Item no.:1106860
  • Splines wheel side: 25
  • Total length: 515 mm
  • Seal ring diameter: 51 mm
Item no.:0545310
  • Position: Front, Outer
  • Inner splines: 23
  • Seal diameter: 51 mm
  • Outer splines: 25
  • Thread size: M24X1,5
Showing 1–24 of 57 products

Drivetrain for Lancia Ypsilon

The Lancia Ypsilon is a car that demands precision when it comes to spare parts, particularly within the power transmission. The drivetrain is the heart of the car's mechanical system and consists of several interacting components ensuring that engine power reaches the wheels efficiently and without loss. At CVJoint24, you will find a specialised range tailored specifically for this model. Our range covers the most critical needs to keep your car's drivetrain in top condition. We understand the importance of every part—from the smallest circlip to the complete shaft—meeting the highest quality standards to endure the stresses of both heavy city driving and long motorway journeys. By choosing the right components, you significantly extend the lifespan of your vehicle.

How the drivetrain is structured on the Lancia Ypsilon

The layout of the drivetrain on a Lancia Ypsilon follows a classic front-wheel-drive configuration, where the gearbox transfers torque via the drive shafts to the front wheels. Each side of the car has a drive shaft equipped with two joints: an inner joint mounted to the gearbox and an outer joint fitted to the wheel hub. The outer CV joint is particularly sophisticated, as it must transmit power while the wheel steers and moves vertically with the suspension. For a compact car such as the Lancia Ypsilon, this means components must be lightweight yet exceptionally durable to cope with the torque. Understanding this setup is key to identifying which part needs replacing when noises or vibrations occur, ensuring that power delivery remains smooth and stable under all driving conditions.

Common faults and symptoms

There are clear warning signs when the drivetrain on your Lancia Ypsilon begins to show wear or damage. One of the most common symptoms is a clicking or knocking noise clearly heard on full steering lock under acceleration; this often indicates that an outer CV joint for the Lancia Ypsilon is worn or contaminated with dirt. If you instead experience vibrations through the body shell under acceleration, it may point to play in an inner joint or a bent drive shaft. It is also critical to inspect the CV boots regularly. A split boot quickly leads to grease loss and the ingress of road grit, which rapidly ruins the constant velocity joint and can cause total failure if not addressed promptly.

Common parts to replace on the Lancia Ypsilon

Within our range for this model, we see a clear pattern in the parts most frequently replaced to maintain driveability. We stock several variants of drive shaft for the Lancia Ypsilon, catering for different engine variants and specific model years. In addition to complete shafts, the specific outer CV joints we provide are very popular replacement parts for those looking to carry out a targeted repair. By replacing solely the worn joint when the shaft itself is undamaged, you save both resources and money. Here are the categories most relevant to your vehicle model:

  • Drive shaft Lancia Ypsilon
  • Outer CV joint Lancia Ypsilon

These parts are essential for maintaining your car's operational reliability and should always be prioritised whenever a fault is suspected.

How to find the right part for your Lancia Ypsilon

Proceed to the relevant section for your Lancia Ypsilon:

On a model with multiple possible drivetrain issues, it is wise to start directly in the correct category. By comparing the exact sections for the Lancia Ypsilon, it becomes easier to distinguish between faults in the drive shaft, CV joint or propeller shaft, allowing you to navigate to the page that best matches your symptoms and fitment.

Choosing the correct part for a car like the Lancia Ypsilon can sometimes be challenging due to technical differences between engine options and gearbox types. The most reliable way to ensure an accurate fit is to select your car's make, model and engine here on our website. Selecting your exact specification automatically filters out parts that are technically compatible with your vehicle. We also advise double-checking technical specifications such as the tooth count on the ABS ring or the overall length of the driveshaft if multiple options are shown. Our goal is for you to feel completely confident in your purchase and avoid unnecessary returns. If you are unsure, our expert team is on hand to guide you to the correct specialised drivetrain parts.

Why buy from CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist, with our central warehouse in Helsingborg, Sweden. We stand apart from general car parts retailers thanks to our deep niche expertise and uncompromising commitment to quality. When you purchase a drive shaft for the Lancia Ypsilon or an outer CV joint for the Lancia Ypsilon from us, you receive components carefully selected to withstand demanding European conditions. We combine technical expertise with fast dispatch across the EU and customer support that genuinely understands the mechanical demands of modern drivetrains. With our help, repairing your Lancia Ypsilon becomes simpler and more dependable, giving you total peace of mind on the road and a car that performs reliably for miles to come.

Frequently Asked Questions about Drivetrain Parts for Lancia Ypsilon

How do I know if my Lancia Ypsilon needs a new drive shaft?

The most common signs are vibrations through the steering wheel or floor under acceleration, as well as unusual noises. If the vibrations stop when you take your foot off the accelerator, it is a strong indication that a drive shaft is worn.

What causes a clicking noise when turning?

A clicking noise on full steering lock is almost always caused by a worn outer CV joint. This often develops after a CV boot has split, allowing dirt and moisture to enter the joint's bearings.

How many drive shafts for the Lancia Ypsilon do you stock?

We currently stock 5 different drive shafts specifically tailored to various Lancia Ypsilon versions to ensure a precise fit.

How do I find the correct parts for my vehicle?

Simply select your Lancia Ypsilon's exact model, year and engine variant in our vehicle selector to display only the parts that match your car.

Why is it important to replace a split CV boot immediately?

The CV boot protects the CV joint. If it splits, grease escapes and grit gets in, ruining the joint in very little time and leading to a much more costly repair.

Are your CV joints for the Lancia Ypsilon of original equipment quality?

Yes, we are driveline specialists and our parts are selected to match or exceed original equipment standards.