Land Rover Freelander 2

Spare parts and drivetrain components for Land Rover Freelander 2.

Products for Land Rover Freelander 2

48 products
1 - 24 of 48
Item no.:0525579
  • Position: Outer
  • Inner splines: 27
  • Seal diameter: 57 mm
  • Outer splines: 40
  • Thread size: M10X1,5
Item no.:0281044
  • Total length: 2,040 mm
  • Number of joints: 4
  • Number of centre bearings: 2
Item no.:316417
  • Total length: 22 mm
  • ABS teeth: 22
Item no.:0826368
  • Inner diameter: 30 mm
  • Bearing thickness: 15 mm
  • Hole spacing c/c: 82 mm
Item no.:0288444
  • Total length: 2,000 mm
  • Number of joints: 3
  • Outer diameter 1: 86 mm
  • Bolt circle diameter 1: 74 mm
  • Outer diameter 2: 86 mm
Item no.:1143235
  • Position: Front left
  • Splines gearbox side: 31
  • Splines wheel side: 40
  • Total length: 539 mm
  • Diameter 1: 100 mm
Item no.:2117645
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 40
  • Total length: 1,002 mm
  • Joint diameter: 100 mm
Item no.:6137674
  • Position: Rear
  • Splines gearbox side: 26
  • Splines wheel side: 28
  • Total length: 818 mm
  • Joint diameter: 73 mm
Item no.:0603810
  • Outer diameter: 19 mm
  • Diameter: 68 mm
Item no.:643954
  • Position: Rear, Inner
  • Inner splines: 29
  • Splines gearbox side: 26
  • Seal diameter: 35 mm
  • Outer diameter: 71 mm
Item no.:624086
  • Total length: 64 mm
  • Diameter: 24 mm
Item no.:1167948
  • Position: Front left
  • Splines gearbox side: 31
  • Splines wheel side: 40
  • Total length: 553 mm
  • Joint diameter: 100 mm
Item no.:2158250
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 40
  • Total length: 1,020 mm
  • Joint diameter: 100 mm
Item no.:0675543
  • Total length: 121 mm
Item no.:0601650
  • Total length: 103 mm
Item no.:640226
  • Position: Rear, Inner
  • Inner splines: 22
  • Splines gearbox side: 26
  • Seal diameter: 35 mm
  • Outer diameter: 75 mm
Item no.:0674435
  • Total length: 87 mm
Item no.:0696900
  • Total length: 115 mm
Item no.:0617856
  • Position: Front
  • Total length: 61 mm
Item no.:0967437
  • Inner diameter: 44 mm
  • Outer diameter: 67 mm
Item no.:659240
  • Position: Rear, Outer
  • Inner splines: 22
  • Splines wheel side: 28
  • Seal diameter: 57,7 mm
  • Thread size: M24X1,5
Showing 1–24 of 48 products

Drivetrain for Land Rover Freelander 2

The Land Rover Freelander 2 is renowned for its versatility and its ability to handle both city commuting and rougher off-road terrain. To preserve these qualities, the drivetrain must remain in top condition. The power transmission on a Freelander 2 is subjected to high loads, especially when towing or driving in demanding environments. Understanding how your car's drivetrain works and when maintenance is due is crucial to avoid costly repairs and unexpected breakdowns. We supply specific components tailored to this model's exact requirements for torque and durability.

By choosing the correct spare parts, you ensure that your vehicle's four-wheel-drive and stability systems function exactly as intended. A worn drivetrain can not only cause unpleasant noises but also negatively impact fuel economy and road safety. With us, you will find everything from complete shafts to individual joints, all selected to meet the rigorous standards expected of a Land Rover.

How the Land Rover Freelander 2 drivetrain is engineered

The drivetrain on the Land Rover Freelander 2 is an advanced setup combining a transversely mounted engine with an intelligent all-wheel-drive system. Power is distributed from the gearbox via a power transfer unit (PTU) to the front axle and further along through a propeller shaft to the rear axle. The system frequently uses a Haldex coupling to regulate power distribution between the front and rear wheels depending on surface grip. This requires all components, from drive shafts to joints, to operate in perfect balance.

The front suspension features two drive shafts handling both steering and drive, which makes the outer CV joints particularly prone to wear. The rear setup uses similar shafts transferring power to the rear wheels. The prop shaft is often split into multiple sections supported by centre bearings to minimise vibrations. Every single part in this system must interact seamlessly to maintain the comfort and all-terrain capability for which the Freelander 2 is famous.

Common faults and symptoms

Several clear warning signs indicate that drivetrain components on your Land Rover Freelander 2 are wearing out. One of the most typical symptoms is a clicking or knocking sound on full steering lock, which usually points to a failing outer CV joint. If you instead experience vibrations throughout the car during acceleration, it may indicate that an inner CV joint or a drive shaft is bent, unbalanced or worn. Vibrations occurring at specific cruising speeds can often be traced back to issues with the propeller shaft or its centre bearing.

Another frequent issue is split CV boots. When a boot tears, lubricating grease escapes and road dirt penetrates, quickly ruining the constant velocity joint. It is therefore vital to inspect the rubber gaiters regularly. If you notice the car hesitating or jerking as power is distributed between the axles, it may also indicate developing issues within the mechanical transmission components.

Common parts to replace on the Land Rover Freelander 2

Depending on driving habits and mileage, certain components need replacing more frequently on a Freelander 2. We stock an extensive range covering the most common requirements for this model. To make navigation simple, we have categorised our parts as follows:

  • Drive shafts for Land Rover Freelander 2 – We stock multiple variants to suit different engine options and axle positions.
  • Outer CV joints for Land Rover Freelander 2 – A critical component for both steering and power delivery.
  • Propeller shafts for Land Rover Freelander 2 – We offer dedicated units balanced to ensure smooth, vibration-free driving.

Replacing a complete drive shaft is often more cost-effective than attempting to rebuild individual joints, especially if multiple sections show wear. Our prop shafts are precision-balanced and ready to install, saving valuable workshop time and guaranteeing professional results.

How to find the right part for your Land Rover Freelander 2

Navigate directly to the relevant subcategory for your Land Rover Freelander 2:

On a vehicle with several interdependent drivetrain components, it pays to start in the correct category straight away. Comparing the dedicated sections for the Land Rover Freelander 2 makes it easy to distinguish between drive shaft, CV joint or propeller shaft issues, allowing you to choose the parts that best match your symptoms and specifications.

Identifying the exact replacement part for a Land Rover Freelander 2 can sometimes be challenging, as specifications vary according to model year, engine variant and gearbox type. The most reliable way to ensure proper fitment is to select your vehicle's make, model and engine in our shop selector. This filters out all incompatible parts and presents only components technically verified for your specific car, saving valuable time and eliminating wrong purchases.

In addition to checking your vehicle specifications, it is wise to verify physical dimensions on the original part, such as the spline count on the CV joint or the overall length of the driveshaft. Land Rover introduced various technical updates throughout production; combining our catalogue data with a visual check gives you complete confidence that the part will fit. If you ever have doubts, our specialists are ready to guide you to the correct component in our catalogue.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, operating with an uncompromising focus on drivetrain and transmission components. We understand the technical nuances of the Land Rover Freelander 2 and only stock parts engineered to the highest standards. Our strength lies in specialised depth: rather than acting as a generic motor factor, we are genuine experts in drivelines. This gives you access to specialised technical support rarely found at general parts retailers.

We combine high product accuracy with an easy-to-use platform centred entirely around correct fitment. With accurate filtering by make, model and engine alongside reliable technical specifications, you can order with absolute peace of mind. Choosing us gives you a dedicated partner committed to keeping your car running smoothly, whether on the motorway or tackling challenging off-road tracks.

Frequently Asked Questions about Drivetrain for Land Rover Freelander 2

What are the most common signs that a drive shaft needs replacing on my Freelander 2?

The most common signs are vibrations under acceleration, knocking noises when applying throttle, or visible damage and grease leaks from the drive shaft boots.

Does the same propeller shaft fit all Land Rover Freelander 2 models?

No, the propeller shaft can vary depending on whether the car has a manual or automatic gearbox, as well as which engine is fitted. Always select your vehicle make, model and engine to find the correct version.

Why is there a clicking noise from the front end when turning my Land Rover?

This is usually caused by a worn outer CV joint. As the bearings inside the joint wear down, play develops, creating that characteristic clicking sound under load through turns.

Can I replace just the CV joint, or do I need to replace the entire drive shaft?

On the Freelander 2, you can often replace the outer CV joint separately. However, if the inner joint is also worn or the shaft itself is corroded, replacing the complete drive shaft is usually the better and more cost-effective option.

How often should I inspect the drivetrain boots?

We recommend inspecting the boots at every routine service or at least once a year. A split CV boot quickly ruins the entire joint due to ingress of road dirt and moisture.

Are your propeller shafts pre-balanced?

Yes, all our propeller shafts are delivered fully balanced from the factory to eliminate vibrations and ensure quiet, smooth running throughout the drivetrain.