Drive shafts for Land Rover Freelander 2

Find the right drive shaft for your Land Rover Freelander 2, whether your SUV runs on petrol or diesel. Our range covers dedicated solutions for front-wheel-drive eD4 models as well as...

Products for Drive shafts for Land Rover Freelander 2

7 products
1 - 7 of 7
Item no.:316417
  • Total length: 22 mm
  • ABS teeth: 22
Item no.:1143235
  • Position: Front left
  • Splines gearbox side: 31
  • Splines wheel side: 40
  • Total length: 539 mm
  • Diameter 1: 100 mm
Item no.:2117645
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 40
  • Total length: 1,002 mm
  • Joint diameter: 100 mm
Item no.:6137674
  • Position: Rear
  • Splines gearbox side: 26
  • Splines wheel side: 28
  • Total length: 818 mm
  • Joint diameter: 73 mm
Item no.:1167948
  • Position: Front left
  • Splines gearbox side: 31
  • Splines wheel side: 40
  • Total length: 553 mm
  • Joint diameter: 100 mm
Item no.:2158250
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 40
  • Total length: 1,020 mm
  • Joint diameter: 100 mm
Item no.:314871
  • Total length: 22 mm
  • ABS teeth: 22

Drive shafts for Land Rover Freelander 2

The Land Rover Freelander 2 is a robust and versatile SUV requiring top-quality components to retain its renowned off-road capabilities and stable handling. The drive shaft is a vital link in the car's power transmission, and at CVJoint24 you will find a range tailored specifically to this model. We understand that precision is everything when it comes to the drivetrain, which is why we only supply parts meeting strict standards for durability and function. With our dedicated parts for the Freelander 2, we cover most requirements regardless of engine variant or drive system. Choosing the correct drive shaft is not merely about keeping the car rolling; it is about safety and avoiding unnecessary consequential damage to the gearbox and wheel bearings.

What does a drive shaft do on a Land Rover Freelander 2?

The primary role of the drive shaft on a Land Rover Freelander 2 is to transfer torque from the gearbox or differential directly to the wheels, driving the vehicle forward. As the Freelander 2 is frequently driven over varied terrain and under heavy loads, the drive shafts endure significant mechanical stress. They must cope with suspension travel and steering angles while delivering continuous power without loss. A drive shaft consists of the shaft bar itself along with inner and outer CV joints protected by rubber CV boots. On four-wheel-drive models, these shafts work in unison with the vehicle's advanced drivetrain to distribute power optimally between the front and rear axles, making their condition critical to overall performance.

Common signs of wear

Several distinct warning signs indicate that a drive shaft on your Land Rover Freelander 2 is wearing out or damaged. One of the most common symptoms is vibration felt through the steering wheel or bodywork during acceleration. This is often caused by imbalance or wear in the inner constant velocity joint. Another classic symptom is a clicking or knocking noise when cornering sharply at low speeds, typically pointing to a worn outer CV joint. If you notice grease splattered across the inside of the wheel rim, a CV boot has split, which quickly allows dirt to enter and ruin the joint's internal moving components.

How to choose the correct drive shaft

Selecting the correct spare part for a Land Rover Freelander 2 can sometimes prove tricky due to technical variations across model years, engine options, and whether the vehicle is front-wheel drive or four-wheel drive. The most reliable way to guarantee the correct fit is to filter by your vehicle's make, model, and engine variant. This identifies the driveshafts technically compatible with your car's exact specifications, including the correct spline count and length. Always check whether the left or right side needs replacing, as both sides are rarely identical. Choosing a complete drive shaft from a driveline specialist also saves time and money during installation compared to repairing a worn assembly.

Related parts to inspect

Feel free to check these exact pages for the same vehicle when working on the drive shaft:

When one drivetrain component shows wear, adjacent parts on the same car often warrant inspection too. Comparing these exact pages for the Land Rover Freelander 2 makes it simpler to determine whether the issue stems from the drive shaft itself or another neighbouring part of the transmission.

This is particularly relevant on models where vibrations, play, and noises can shift symptoms across several components within the same drivetrain. A quick check of related categories reduces the risk of replacing the right type of part while missing a connected component that causes the same underlying fault.

By proactively replacing worn parts, you extend the service life of the entire driveline and prevent costly breakdowns along the way.

Why shop with CVJoint24?

CVJoint24 is your Swedish driveline specialist for power transmission components. We focus on a specialised, deep inventory to deliver expert knowledge that general car parts stores often lack. Accurate fitment and knowledgeable technical support are our highest priorities, giving you total peace of mind with your purchase. When buying a drive shaft for your Land Rover Freelander 2 from us, you receive a product tested and approved for rigorous European conditions. Our database is continually updated to match the latest vehicle data, combining specialist expertise with fast dispatch to get your car back on the road without delay.

Frequently Asked Questions about Drive Shafts for Land Rover Freelander 2

How do I know which drive shaft fits my Land Rover Freelander 2?

The easiest and most reliable way is to select your vehicle make, model and engine variant in our search filter. This filters our range to display only the drive shafts tailored specifically to your engine and model year.

What are the most common symptoms of a faulty drive shaft?

The most common signs are vibrations during acceleration, clicking noises when turning sharply, and grease leaking from torn CV boots.

Is there a difference between drive shafts for manual and automatic gearboxes?

Yes, there are often differences in both length and fittings between manual and automatic gearboxes on the Freelander 2. Always check the product specifications carefully before ordering.

Can I replace just the CV joint instead of the entire drive shaft?

Yes, provided the shaft itself is undamaged and straight, you can simply replace the worn CV joint. We supply both complete drive shafts and individual constant velocity joints.

Why does my car vibrate under acceleration even though the tyres are balanced?

If vibrations occur specifically under acceleration, it is often a sign of wear in the drive shaft's inner CV joint, causing an imbalance in power delivery through the drivetrain.