LDV Maxus

Spare parts and drivetrain components for the LDV Maxus.

Products for LDV Maxus

11 products
1 - 11 of 11
Item no.:2198060
  • Position: Front right
  • Splines gearbox side: 30
  • Splines wheel side: 30
  • Total length: 1,095 mm
  • ABS teeth: 48
Item no.:1112964
  • Position: Front left
  • Splines gearbox side: 30
  • Splines wheel side: 30
  • Total length: 720 mm
  • ABS teeth: 48
Item no.:0698710
Item no.:7314048
  • Position: Front right
  • Splines gearbox side: 30
  • Splines wheel side: 30
  • Total length: 1,095 mm
  • Joint diameter: 102 mm
Item no.:7315659
  • Position: Front left
  • Splines gearbox side: 30
  • Splines wheel side: 30
  • Total length: 719 mm
  • Joint diameter: 102 mm
Item no.:3519559
  • Position: Outer
  • Inner splines: 36
  • Splines wheel side: 30
  • Outer diameter: 102 mm
  • ABS teeth: 48
Item no.:3548526
  • Position: Outer
  • Inner splines: 36
  • Splines wheel side: 30
  • Outer diameter: 102 mm
Item no.:313171
  • Position: Front
  • Splines gearbox side: 30
  • Splines wheel side: 30
  • Total length: 719 mm
  • ABS teeth: 48

Drivetrain for LDV Maxus

The LDV Maxus is a commercial van that places high demands on its drivetrain to withstand the stresses of everyday commercial use. The drivetrain is the system that transfers power from the engine to the wheels, and for a vehicle that frequently carries heavy loads, every component in this system is critical. As a Swedish specialist in drivetrain components, we understand the specific needs of LDV owners. We offer a range selected specifically to meet the technical requirements of the Maxus model. Maintaining the drivetrain is not merely about avoiding breakdowns; it is also about preserving the vehicle's driving dynamics and ensuring that power transfer remains as efficient as possible. By choosing the right parts from a specialist, you can extend your van's service life considerably and avoid costly repairs caused by consequential damage.

How the drivetrain is built on the LDV Maxus

The drivetrain layout on an LDV Maxus is engineered to be both robust and practical. Power is generated by the engine and passes through the gearbox before being distributed to the drive shafts. Because the Maxus is typically front-wheel drive, the drive shafts serve a dual purpose: they must both propel the vehicle forwards and allow the front wheels to steer. This places extreme demands on the CV joints, which must be able to operate at sharp angles without losing the capacity to transfer torque. The system also includes components such as wheel bearings and CV boots that protect the delicate joints. For an LDV Maxus to function at its best, all these parts must work together with minimal friction. An incorrect angle or slight play in a joint can rapidly travel through the system and create an imbalance, which in turn causes wear to the gearbox output shafts and bearings.

Common faults and symptoms

It is important to pay attention to early warning signs of drivetrain problems on your LDV Maxus. One of the most typical symptoms is a rhythmic clicking or knocking noise heard when turning sharply at low speeds. This almost always indicates that an outer constant velocity joint is worn and needs replacing. Another frequent symptom is vibration felt through the steering wheel or the vehicle floor under acceleration. These vibrations can often be traced back to the inner CV joints or an imbalance in the driveshaft itself. You should also regularly inspect the CV boots; if these are split or have come loose, the grease lubricating the joint will be thrown out while dirt and water penetrate. This leads to accelerated wear that can quickly result in a complete breakdown, leaving your vehicle stranded.

Common parts to replace on the LDV Maxus

When it comes to maintaining or repairing the power transmission on this model, certain components are more vulnerable than others. The single most common part to replace is the drive shaft for the LDV Maxus, particularly on vehicles that have covered many kilometres in urban stop-and-start traffic. We also see high demand for replacement CV joints and complete boot kits. Because the LDV Maxus is a working vehicle, these components are exposed to more dirt and harsher conditions than on a regular passenger car, meaning rubber parts can perish and crack prematurely. By using high-precision components made from the correct materials, you ensure that the repair lasts. Replacing an entire drive shaft can often be more time-efficient and cost-effective in the long run than trying to rebuild an old assembly with individual parts, especially once labour costs are factored in.

How to find the right part for your LDV Maxus

Continue to the relevant subcategory for your LDV Maxus:

On a vehicle with several possible drivetrain faults, it pays to start directly in the correct category. By comparing the exact component sections for the LDV Maxus, it becomes easier to distinguish between faults in the drive shaft, CV joint or propeller shaft and to proceed to the page that best matches your symptoms and fitment.

Following this approach minimises the risk of ending up with incorrect parts once your van is up on the ramp in the garage. Our database is continuously updated to ensure that fitment details are as accurate as possible for your commercial vehicle.

Why shop at CVJoint24

Choosing CVJoint24 means dealing with a specialist focused on quality and drivetrain expertise. As a Swedish driveline specialist, we have built up a unique pool of technical knowledge across a wide variety of vehicles, including the LDV Maxus. We supply not only parts, but also the confidence that comes with knowing the component will fit and work as intended. Our deep category focus allows us to offer solutions where others fall short. By selecting your van's make, model and engine, you can find the right parts quickly, and our rapid order handling helps to keep vehicle downtime to a minimum. We know that an LDV Maxus is often an indispensable business tool, which is why we prioritise dependable delivery and parts built to cope with demanding conditions. Choose a driveline specialist – it pays off in the long run.

Frequently Asked Questions about Drivetrain for LDV Maxus – Power Transmission Spare Parts

How do I know which drive shaft fits my LDV Maxus?

The easiest way is to select your vehicle's make, model, and engine variant in our search filter. This ensures you only see drive shafts that are technically compatible with your specific van.

What are the most common signs of a worn CV joint on an LDV Maxus?

The most common symptoms are clicking noises when turning, vibrations under acceleration, or visible grease leaking from a split CV boot.

Can I replace just the CV boot on my LDV Maxus?

Yes, if you catch the damage early before dirt and moisture have damaged the joint itself, replacing the boot and repacking it with fresh grease is often sufficient.

Why is my LDV Maxus vibrating during acceleration?

Vibrations under acceleration are often caused by wear in the inner CV joints or an imbalance in the drive shaft, which is a common issue on commercial vehicles carrying heavy loads.

Do you sell complete drive shafts for the LDV Maxus?

Yes, we offer complete drive shafts that arrive fully assembled and ready for direct installation, which is often the most cost-effective solution for extensive wear.

Are your LDV Maxus parts OEM quality?

Our parts are carefully selected to meet or exceed original equipment specifications, guaranteeing long-lasting durability and a precise fit for your drivetrain.