Mercedes B Class

Spare parts and drivetrain components for Mercedes B Class.

Products for Mercedes B Class

89 products
1 - 24 of 89
Item no.:1101681
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 532 mm
  • Joint diameter: 88 mm
Item no.:2196611
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 496 mm
  • Joint diameter: 88 mm
Item no.:7305257
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 996 mm
  • Thread size: M16x1.5
Item no.:0523853
  • Position: Outer
  • Inner splines: 27
  • Seal diameter: 65 mm
  • Outer splines: 30
  • Thread size: M16X1,5
Item no.:0483349
  • Position: Front left, Inner
  • Inner splines: 27
  • Seal diameter: 38 mm
  • Outer splines: 27
Item no.:0421544
  • Position: Front right, Inner
  • Inner splines: 27
  • Seal diameter: 42,5 mm
  • Outer splines: 27
Item no.:242559
  • Position: Front right, Inner
  • Inner splines: 27
  • Total length: 110 mm
Item no.:247467
  • Position: Front right, Inner
  • Inner splines: 28
  • Splines gearbox side: 27
  • Total length: 100 mm
Item no.:142253
  • Position: Front left, Inner
  • Inner splines: 28
  • Splines gearbox side: 27
  • Total length: 140 mm
Item no.:1165307
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 25
  • Total length: 615 mm
  • Joint diameter: 88 mm
Item no.:2132409
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 25
  • Total length: 950 mm
  • Joint diameter: 77 mm
Item no.:0499907
  • Position: Front right, Inner
  • Inner splines: 25
  • Seal diameter: 38 mm
  • Outer splines: 27
Item no.:0490853
  • Position: Front left, Inner
  • Inner splines: 25
  • Seal diameter: 38 mm
  • Total length: 164 mm
  • Outer splines: 27
Item no.:247470
  • Position: Inner
  • Inner splines: 28
  • Splines gearbox side: 27
  • Total length: 131 mm
  • Outer splines: 27
Item no.:144070
  • Position: Inner
  • Inner splines: 28
  • Splines gearbox side: 27
  • Total length: 170 mm
Item no.:247558
  • Position: Inner
  • Splines gearbox side: 22
  • Splines wheel side: 27
  • Total length: 541 mm
  • ABS teeth: 27
Item no.:141380
  • Position: Inner
  • Splines gearbox side: 27
  • Splines wheel side: 27
  • Total length: 148 mm
  • ABS teeth: 27
Item no.:1105703
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 595 mm
  • Joint diameter: 76 mm
Item no.:2187630
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 977 mm
  • Joint diameter: 76 mm
Item no.:349534
  • Position: Inner
  • Inner splines: 27
  • Seal diameter: 36 mm
  • Total length: 155 mm
  • Joint diameter: 75 mm
Item no.:253996
  • Position: Front, Outer
  • Inner splines: 28
  • Splines wheel side: 30
  • Total length: 115 mm
  • ABS teeth: 25
Item no.:246657
  • Position: Front right, Inner
  • Inner splines: 27
  • Splines gearbox side: 27
  • Total length: 145 mm
Item no.:143552
  • Position: Front left, Inner
  • Inner splines: 27
  • Total length: 110 mm
Item no.:2109650
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 25
  • Total length: 990 mm
  • Joint diameter: 88 mm
Showing 1–24 of 89 products

Drivetrain for Mercedes Benz B Class

The Mercedes Benz B Class is a car model that combines practicality with Mercedes' renowned engineering and comfort. The drivetrain is the core of your vehicle's power transmission, responsible for transferring engine torque to the wheels smoothly and without vibrations. Here at CVJoint24, you will find a carefully selected range of components essential to your car's operational reliability and long-term durability. With comprehensive stock in our warehouse, we cater to most requirements across this model series, covering both earlier generations and later versions. Maintaining the drivetrain is not merely a matter of ride comfort; it is crucial for preserving the stability and safety that characterise a Mercedes. A well-functioning drivetrain minimises wear on other components such as the gearbox and wheel bearings, saving you substantial repair costs in the long run.

How the drivetrain is engineered on the Mercedes Benz B Class

The drivetrain layout on the Mercedes Benz B Class is technically sophisticated and engineered to maximise interior cabin space. This typically entails a transverse engine layout and front-wheel drive as standard. Power is transmitted from the gearbox via drive shafts to the front wheels, demanding components capable of handling high torque alongside sharp articulation angles. On models equipped with 4MATIC all-wheel drive, a propeller shaft is added to distribute power to the rear axle through a rear differential. The system requires exceptional precision across all moving parts. Both the inner and outer CV joints play a pivotal role, allowing for suspension travel and steering articulation while keeping power delivery continuous and jerk-free. Every component is balanced to keep cabin noise to an absolute minimum, safeguarding the refined driving experience expected of a Mercedes.

Common faults and symptoms

Several distinct warning signs indicate that drivetrain components are wearing out on your Mercedes Benz B Class, and identifying them early can prevent catastrophic failure. One of the most typical symptoms is a rhythmic clicking or knocking noise when steering on full lock, such as when parking or negotiating tight corners. This almost always points to a worn outer CV joint, frequently caused by a split CV boot letting in grit and road dirt. If you instead experience vibrations through the steering wheel or throughout the chassis under acceleration, the issue is often traceable to an inner constant velocity joint or an unbalanced driveshaft. It is equally important to inspect the inside of your road wheels for grease leaks; grease flung onto the wheels is an early alert that a boot has torn, leaving the joint vulnerable to moisture and corrosion.

Common parts to replace on the Mercedes Benz B Class

Depending on mileage and driving conditions, certain components on the Mercedes Benz B Class are naturally more prone to wear than others. To meet demand and help you quickly identify the correct parts for your model year, our range is organised into clearly defined sections. Here are the most relevant categories for your vehicle:

  • Drive shafts for Mercedes Benz B Class
  • Outer CV joints for Mercedes Benz B Class
  • Inner CV joints for Mercedes Benz B Class
  • Propeller shafts for Mercedes Benz B Class

By focusing specifically on these product categories, we can ensure that critical parts are in stock for rapid dispatch whenever your vehicle needs them, whether it is a front-wheel-drive or 4MATIC all-wheel-drive variant.

How to find the right part for your Mercedes Benz B Class

Browse directly to the relevant subcategory for your Mercedes Benz B Class:

When diagnosing drivetrain problems, starting in the appropriate section saves time. By comparing the specific categories for the Mercedes Benz B Class, it becomes straightforward to distinguish between faults in a drive shaft, a CV joint or a prop shaft, allowing you to proceed directly to the page that best matches your symptoms and fitment needs.

Identifying the precise replacement part for your Mercedes Benz B Class can occasionally prove challenging, as specifications often vary depending on engine variant, gearbox type and year of manufacture. To make finding the right component simple and reliable, you can select your car's exact make, model and engine variant in our vehicle selector. This automatically filters out unsuitable parts, presenting only those technically verified for your specific car. It is the most reliable way to ensure that critical dimensions such as spline count, overall length and ABS ring configuration match your original equipment. Should you require further guidance, our expert team is on hand to help verify technical specifications and OEM part numbers, ensuring your replacement drivetrain parts fit first time without unnecessary returns.

Why shop with CVJoint24?

As a dedicated Swedish driveline specialist shipping across Europe from our central warehouse in Helsingborg, CVJoint24 delivers a unique combination of technical expertise and a comprehensive product inventory. Rather than being a general car parts factor, we concentrate exclusively on driveline and power transmission, ensuring fitment accuracy and component quality that few generalists can equal. When sourcing parts for your Mercedes Benz B Class from us, you can trust our complete understanding of the exact technical requirements of these vehicles. We supply high-precision, hard-wearing spare parts built to the standards expected by Mercedes drivers. With our specialist knowledge, fast delivery from our own warehouse and customer support that truly understands drivelines, we are the trusted partner for DIY mechanics and professional garages seeking dependable Mercedes drivetrain solutions.

Frequently Asked Questions about Drivetrains for Mercedes-Benz B-Class

How do I know if my Mercedes B-Class needs a new drive shaft?

The most common signs are vibrations under acceleration or unusual noises from the underside of the car. If the vibrations stop when you take your foot off the accelerator, it is often an inner CV joint or the drive shaft itself that is worn.

Do all CV joints fit every B-Class model?

No, there are differences depending on the engine, gearbox and model year. Always filter by your car's make, model and engine variant in our store to find the exact part for your vehicle.

What is the difference between the inner and outer CV joint on a B-Class?

The outer CV joint is located closest to the wheel and accommodates steering angles, whilst the inner joint sits closest to the gearbox and primarily manages suspension movements along the shaft's length.

Can I replace just the CV boot instead of the entire CV joint?

Yes, if you catch a split or damaged CV boot early before road dirt and moisture have damaged the joint itself, replacing the boot and repacking it with fresh grease is often sufficient.

Why does my Mercedes B-Class vibrate under acceleration?

Vibrations during acceleration are frequently caused by wear in the inner constant velocity joints. Once worn, the resulting play causes an imbalance in the drivetrain whenever the engine is under load.

Do you stock propeller shafts for the Mercedes B-Class 4MATIC?

Yes, our range includes propeller shafts specifically designed for all-wheel-drive 4MATIC versions of the B-Class to ensure smooth, vibration-free power transfer.