MG

Spare parts and drivetrain components for MG.

Choose model

Choose a model to move to more precise products and the next step in the vehicle tree.

Products for MG

80 products
1 - 24 of 80
Item no.:116883
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 25
  • Total length: 658 mm
Item no.:214134
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 25
  • Total length: 910 mm
Item no.:115424
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 36
  • Total length: 585 mm
Item no.:113049
  • Position: Front left
  • Splines gearbox side: 36
  • Splines wheel side: 27
  • Total length: 686 mm
Item no.:213535
  • Position: Front right
  • Splines gearbox side: 36
  • Splines wheel side: 27
  • Total length: 939 mm
Item no.:0569535
  • Position: Outer
  • Inner splines: 22
  • Seal diameter: 49 mm
  • Outer splines: 26
  • ABS teeth: 43
Item no.:130084
  • ABS teeth: 43
  • Inner diameter: 82 mm
  • Outer diameter: 93 mm
  • Width: 9 mm
Item no.:7300374
  • Position: Front, Outer
  • Inner splines: 22
  • Seal diameter: 49 mm
  • Outer splines: 26
  • Thread size: M22X1,5
Item no.:1138562
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 26
  • Total length: 641 mm
  • Diameter 1: 82 mm
Item no.:2100814
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 26
  • Total length: 880 mm
  • Diameter 1: 82 mm
Item no.:2178264
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 26
  • Total length: 880 mm
  • ABS teeth: 43
Item no.:1178296
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 26
  • Total length: 641 mm
  • ABS teeth: 43
Item no.:1154395
  • Position: Front left
  • Splines gearbox side: 23
  • Splines wheel side: 26
  • Total length: 631 mm
  • ABS teeth: 43
Item no.:2129507
  • Position: Front right
  • Splines gearbox side: 23
  • Splines wheel side: 26
  • Total length: 925 mm
  • ABS teeth: 43
Item no.:353104
  • Position: Outer
  • Inner splines: 24
  • Seal diameter: 58 mm
  • Outer splines: 28
  • Thread size: M24X1,5
Item no.:334636
  • Position: Front
  • ABS teeth: 43
  • Inner diameter: 82 mm
  • Outer diameter: 93 mm
  • Width: 9 mm
Item no.:518203
  • Position: Rear right
  • Splines gearbox side: 29
  • Splines wheel side: 25
  • Total length: 841 mm
  • ABS teeth: 42
Item no.:411460
  • Position: Rear left
  • Splines gearbox side: 29
  • Splines wheel side: 25
  • Total length: 568 mm
  • ABS teeth: 42
Item no.:0198100
  • Splines gearbox side: 27
  • Splines wheel side: 36
  • Total length: 644 mm
Item no.:0147764
  • Splines gearbox side: 34
  • Splines wheel side: 36
  • Total length: 689 mm
Item no.:0507769
  • Position: Outer
  • Inner splines: 24
  • Seal diameter: 61 mm
  • Outer splines: 36
  • Total length: 156,5 mm
Item no.:356848
  • Position: Outer
  • Inner splines: 32
  • Seal diameter: 55 mm
  • Outer splines: 26
  • ABS teeth: 43
Item no.:112689
  • Position: Front left
  • Splines gearbox side: 29
  • Splines wheel side: 26
  • Total length: 588 mm
  • Diameter 1: 92 mm
Item no.:212224
  • Position: Front right
  • Splines gearbox side: 29
  • Splines wheel side: 26
  • Total length: 938 mm
  • Diameter 1: 92 mm
Showing 1–24 of 80 products

Drivetrain for MG

The drivetrain in an MG is the heart of the car's mechanical performance, transferring power from the engine and gearbox directly to the wheels. For a car often associated with driving pleasure and sporty dynamics, it is crucial that every component in the power transmission operates smoothly without friction or play. A well-functioning drivetrain not only reduces wear on other mechanical components, but also ensures smoother acceleration and better fuel economy. With us, you will find everything from complete drive shafts to specific repair kits tailored to MG's unique engineering. We understand the importance of maintaining your car's original handling, which is why we supply parts made to high technical standards that provide an exact fit for straightforward fitting.

How the drivetrain differs between MG models

MG has a diverse history, meaning drivetrain layouts can vary considerably across different generations and models. For cars like the MG MG ZR, a front-wheel-drive hatchback focused on sharp responsiveness, the drive shafts and joints are engineered to manage both steering and power delivery simultaneously. This places high demands on the outer constant velocity joint, which must articulate through steep angles under load without losing strength. Compared to heavier vehicles, MG components are often designed to be lightweight yet robust enough to manage the engine torque reliably. Understanding these nuances is vital when selecting spare parts, as even slight differences in driveshaft length or the spline count on a CV joint will determine whether the part fits correctly.

Common faults and symptoms

When drivetrain components start to wear, they often give clear warning signs. One of the most typical symptoms of a failing outer CV joint on an MG is a rhythmic clicking or knocking noise heard when executing sharp turns at low speed. This is frequently caused by a split CV boot, which allows road grit to enter and grease to escape, rapidly destroying the internal balls and tracks. If you instead experience vibrations throughout the car under acceleration, it may point to an inner CV joint or an unbalanced or damaged drive shaft. Addressing these symptoms promptly prevents secondary damage to the gearbox or wheel bearings. Regularly inspecting the condition of your CV boots is the simplest way to avoid expensive repairs down the road.

Popular MG models to explore

Continue to the relevant model or subcategory for MG:

On a broad brand page, the key is to quickly find the right combination of model and component category. Starting from one of the most common model or category links for MG makes it straightforward to reach a page with precise fitment and relevant parts.

By selecting your specific model from our list, you gain access to a filtered view displaying only the components compatible with your car. This minimises the risk of ordering the wrong item and gives you complete peace of mind that the parts will fit as intended.

How to find the right part for your MG

Identifying the correct spare part for an MG can occasionally be tricky due to technical revisions throughout a model's production run. The most reliable approach is to select your vehicle's make, model and engine from our catalogue. This matches your car with our database to display compatible drive shafts and other essential components. In addition to vehicle details, it is wise to verify physical dimensions if you are unsure, such as the tooth count on the ABS ring or whether your car has a manual or automatic gearbox, as this can affect drive shaft length and fitment. Our customer support team and detailed technical specifications are always on hand to help guide you, ensuring your MG returns to the road quickly with the right equipment.

Why shop at CVJoint24

As a Swedish driveline specialist, we at CVJoint24 have built extensive technical expertise in power transmission for MG and many other marques. Rather than covering every category, we focus entirely on drivetrain excellence. This means we offer exceptional depth in our range, with parts meticulously selected for quality and fitment. When you buy from us, you get more than just a spare part; you get the confidence of dealing with a specialist who understands your car's technical requirements. Backed by fast dispatch from our warehouse in Helsingborg, Sweden across the European Union, we keep your car's downtime to a minimum. We are the trusted choice for MG owners who demand precision, longevity and specialist expertise when sourcing car parts.

Frequently Asked Questions about Drivetrains for MG – Transmission Spare Parts

How do I know if my MG needs a new drive shaft?

The most common symptoms are heavy vibrations under acceleration or unusual noises coming from underneath the vehicle. If the vibrations stop when you release the accelerator, an inner CV joint or the drive shaft itself is usually the culprit.

Do all CV joints fit every MG model?

No, CV joints vary in size, spline tooth count and length depending on the model and engine variant. Always use our make, model and engine selector to find the correct part for your specific MG.

What is the difference between an inner and outer CV joint on an MG?

The outer CV joint sits closest to the wheel and allows for steering, whereas the inner CV joint is located closest to the gearbox and accommodates suspension movement. Worn outer joints typically click when turning, whereas worn inner joints produce vibrations.

Can I replace just the CV boot if it is split?

Yes, if you catch a split CV boot early before road dirt has damaged the joint itself, replacing the boot and repacking it with fresh grease is often sufficient. If the joint has already started making noise, the entire CV joint must be replaced.

Why is the correct tooth count on the ABS ring important?

The ABS ring on the CV joint sends signals to the car's braking system. If the number of teeth does not match the vehicle's original specification, the ABS system will trigger an error light or malfunction.

Do you supply drive shafts for the MG ZR?

Yes, we have a dedicated range for the MG ZR that includes both complete drive shafts and outer CV joints tailored to the model's exact specifications.