Mitsubishi Lancer Viii Sportback

Spare parts and drivetrain components for the Mitsubishi Lancer Viii Sportback.

Products for Mitsubishi Lancer Viii Sportback

15 products
1 - 15 of 15
Item no.:0612148
  • Position: Front
  • Diameter: 85 mm
  • Total length: 102 mm
  • Outer diameter: 24 mm
Item no.:147474
  • Position: Front left, Inner
Item no.:0565718
  • Position: Outer
  • Seal diameter: 59,5 mm
  • Inner splines: 33
  • Outer splines: 28
Item no.:1112540
  • Position: Front left
  • Total length: 650 mm
  • Splines gearbox side: 27
  • Splines wheel side: 28
Item no.:2143087
  • Position: Front right
  • Total length: 970 mm
  • Splines gearbox side: 27
  • Splines wheel side: 28
Item no.:1147740
  • Position: Front left
  • Total length: 669 mm
  • Splines gearbox side: 28
  • Splines wheel side: 27
Item no.:242693
  • Position: Front, Inner
Item no.:1116027
  • Position: Front left
  • Total length: 630 mm
  • Splines gearbox side: 24
  • Splines wheel side: 28
Item no.:0515242
  • Position: Outer
  • Seal diameter: 59 mm
  • Inner splines: 30
  • Outer splines: 28
Item no.:111465
  • Position: Front left
  • Total length: 665 mm
  • Splines gearbox side: 25
  • Splines wheel side: 28
Item no.:217481
  • Position: Front right
  • Total length: 945 mm
  • Splines gearbox side: 25
  • Splines wheel side: 28
Item no.:0644987
  • Position: Front
  • Diameter: 85 mm
  • Total length: 102 mm
  • Outer diameter: 24 mm
Item no.:146829
  • Position: Front left, Inner

Drivetrain for Mitsubishi Lancer Viii Sportback

The drivetrain is one of the most critical systems in your Mitsubishi Lancer Viii Sportback, as it is responsible for transmitting the engine's power all the way to the wheels. For a car model that combines a sporty character with everyday practicality, it is vital that every component in the power transmission functions flawlessly. At CVJoint24, we understand the technical requirements for this specific model and therefore only supply parts that meet or exceed original specifications. By maintaining your drivetrain with the right spare parts, you extend your car's lifespan and ensure a safe driving experience whatever the road conditions.

How the drivetrain is engineered on the Mitsubishi Lancer Viii Sportback

The drivetrain design on a Mitsubishi Lancer Viii Sportback follows a proven layout where power is transferred from the engine through the gearbox to the front wheels. The system consists of several interacting components, with the drive shafts playing the main role in transferring torque. Each drive shaft is fitted with two joints: an inner joint at the gearbox and an outer joint at the wheel. The outer CV joint is particularly important as it must transmit power while the wheel steers and moves vertically. This entire assembly is protected by rubber CV boots that retain the lubricating grease and seal out dirt and moisture, which is vital for component durability in harsh European weather.

Common faults and symptoms

There are several clear signs that drivetrain components on your Mitsubishi Lancer Viii Sportback are beginning to wear out. The most common symptom of a failing outer CV joint is a rhythmic clicking or knocking sound that occurs when turning sharply under acceleration. If you instead experience vibrations throughout the car during acceleration, it can indicate that the inner CV joint or the driveshaft itself is unbalanced or damaged. Another critical warning sign is grease splattered on the inside of the wheel rim or around the wheel arch, pointing to a cracked CV boot. If a boot tears, dirt penetrates the joint, quickly leading to complete failure if not resolved promptly.

Common parts to replace on the Mitsubishi Lancer Viii Sportback

For the Mitsubishi Lancer Viii Sportback, it is primarily drive shafts and outer CV joints that require attention at higher mileages or after driving on rough roads. In our range, you will currently find 3 specific variants of complete drive shafts and 2 types of outer constant velocity joints tailored to this model. Replacing a complete drive shaft on a Mitsubishi Lancer Viii Sportback is often a cost-effective solution, as you receive both the inner and outer joints as well as new CV boots in one package. If the fault is isolated to the wheel side, replacing just the outer CV joint may suffice, restoring steering precision and eliminating noises when cornering.

How to find the right part for your Mitsubishi Lancer Viii Sportback

Go directly to the right category for your Mitsubishi Lancer Viii Sportback:

On a model with several potential drivetrain issues, it makes sense to start in the correct category straight away. By comparing the exact component sections for the Mitsubishi Lancer Viii Sportback, it becomes easier to distinguish between faults in the drive shaft, CV joint or propeller shaft and proceed to the page that best matches your symptoms and fitment.

By following these links, you will see exactly which parts are available and can compare technical specifications so you can buy with total confidence.

Why shop at CVJoint24

As a Swedish driveline specialist shipping across the EU from our central warehouse in Helsingborg, we offer a unique combination of in-depth technical expertise and a high-quality range. We know that exact fitment is crucial for a successful repair, which is why we place great focus on ensuring our vehicle databases are accurate for the Mitsubishi Lancer Viii Sportback. When you buy from us, you get not only a spare part, but also the assurance that the product has been chosen by specialists who understand automotive drivetrains and the demands placed on power transmission. With our dedicated focus on the drivetrain, we provide technical advice and product relevance that general car parts stores often lack, making us the clear choice for both DIY mechanics and professional garages.

Frequently Asked Questions about Drivetrain for Mitsubishi Lancer Viii Sportback

How do I know whether I need to replace the entire drive shaft or just the CV joint?

If you hear clicking noises when cornering, it is usually the outer CV joint. If you experience vibrations during acceleration, it is often caused by the inner joint or an imbalance in the shaft, making replacing the complete drive shaft the safest solution.

Do all drive shafts fit every Mitsubishi Lancer Viii Sportback?

No, specifications vary depending on engine size and whether the vehicle has a manual or automatic gearbox. Always select your car's exact make, model and engine to find the right part.

What is included when I buy an outer CV joint for my Lancer Viii Sportback?

Our CV joint kits are supplied complete with the joint itself, a model-specific CV boot, high-quality grease, circlips and mounting clamps.

Are your drive shafts for Mitsubishi Lancer Viii Sportback brand new or remanufactured?

We supply brand new, factory-fresh drive shafts of high quality, which means you do not need to return your old core unit and you get a component built for maximum service life.

How quickly can I have the parts delivered?

As a Swedish driveline specialist, we aim for fast delivery dispatched directly from our central warehouse, so your Mitsubishi Lancer Viii Sportback can get back on the road as soon as possible.

Can a split CV boot really destroy the entire CV joint?

Yes, absolutely. When the boot splits, grease escapes and road dirt enters. Deprived of lubrication and exposed to abrasive particles, the metal components wear out in very little time.