Mitsubishi Lancer Viii Sportback

Spare parts and drivetrain components for the Mitsubishi Lancer Viii Sportback.

Products for Mitsubishi Lancer Viii Sportback

67 products
25 - 48 of 67
Item no.:1116027
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 28
  • Total length: 630 mm
  • Joint diameter: 95 mm
Item no.:0986413
  • Inner diameter: 41 mm
  • Outer diameter: 61 mm
Item no.:356286
  • Position: Outer
  • Inner splines: 37
  • Seal diameter: 59,5 mm
  • Outer splines: 28
  • Thread size: M22X1,5
Item no.:0515242
  • Position: Outer
  • Inner splines: 30
  • Splines wheel side: 28
  • Seal diameter: 59 mm
  • Outer splines: 28
Item no.:351186
  • Position: Outer
  • Inner splines: 35
  • Splines wheel side: 28
  • Seal diameter: 59,5 mm
  • Outer splines: 28
Item no.:641937
  • Position: Rear, Inner
  • Inner splines: 26
  • Seal diameter: 35 mm
  • Total length: 160 mm
  • Joint diameter: 64 mm
Item no.:111465
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 28
  • Total length: 665 mm
Item no.:217481
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 28
  • Total length: 945 mm
Item no.:0900943
  • Total length: 56 mm
  • Diameter: 22 mm
Item no.:1178204
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 670 mm
Item no.:2123513
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 950 mm
Item no.:117139
  • Position: Front left
  • Splines gearbox side: 28
  • Splines wheel side: 28
  • Total length: 617 mm
Item no.:2137318
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 28
  • Total length: 946 mm
Item no.:148162
  • Position: Front left, Inner
  • Inner splines: 36
  • Splines gearbox side: 24
  • Seal diameter: 50 mm
  • Total length: 183 mm
Item no.:344024
  • Position: Front, Inner
  • Inner splines: 35
  • Seal diameter: 40 mm
  • Total length: 175 mm
  • Joint diameter: 89 mm
Item no.:0560472
  • Position: Outer
  • Inner splines: 26
  • Seal diameter: 48 mm
  • Outer splines: 25
  • Thread size: M22X1,5
Item no.:2178058
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 952 mm
Item no.:0645818
  • Total length: 80 mm
Item no.:0682649
  • Total length: 98 mm
Item no.:199415
  • Position: Front left
  • Splines gearbox side: 30
  • Splines wheel side: 30
  • Total length: 453 mm
Item no.:0666374
  • Total length: 98 mm
Showing 25–48 of 67 products

Drivetrain for Mitsubishi Lancer Viii Sportback

The drivetrain is one of the most critical systems in your Mitsubishi Lancer Viii Sportback, responsible for transferring engine power all the way to the wheels. For a model that blends sporty dynamics with everyday practicality, it is vital that every transmission component operates flawlessly. At CVJoint24, we understand the technical demands of this specific model and offer only parts that meet or exceed original equipment specifications. By maintaining your drivetrain with the correct spare parts, you extend your car's lifespan and ensure safe handling across all road conditions.

How the drivetrain is engineered on the Mitsubishi Lancer Viii Sportback

The drivetrain design of the Mitsubishi Lancer Viii Sportback uses a proven front-wheel-drive configuration where power travels from the engine through the gearbox to the front wheels. The system relies on multiple interacting parts, with the drive shafts playing the key role in delivering torque. Each drive shaft features two joints: an inner joint at the gearbox and an outer joint at the wheel hub. The outer CV joint is particularly critical, as it must transmit power smoothly while the wheel steers and moves with the suspension. This entire setup is protected by flexible rubber CV boots that retain grease and seal out dirt and moisture—vital for component longevity in demanding European climates.

Common faults and symptoms

Several distinct warning signs indicate that drivetrain components on your Mitsubishi Lancer Viii Sportback are worn. The most frequent sign of a failing outer constant velocity joint is a rhythmic clicking or knocking noise when turning sharply under acceleration. If you notice vibrations throughout the car under load instead, this often points to an unbalanced or worn inner CV joint or driveshaft assembly. Another key warning sign is grease splattered across the inside of the wheel rim or wheel arch, signalling a split CV boot. When a boot tears, dirt quickly enters the joint, leading to total failure if not rectified promptly.

Common parts to replace on the Mitsubishi Lancer Viii Sportback

On the Mitsubishi Lancer Viii Sportback, drive shafts and outer CV joints are the parts most frequently requiring attention at higher mileages or after driving on rough roads. Our range includes multiple options for complete drive shafts and outer CV joints tailored to this model. Replacing a complete drive shaft on your Mitsubishi Lancer Viii Sportback is often the most cost-effective solution, as it provides both inner and outer joints alongside fresh boots in one package. If wear is isolated strictly to the wheel side, replacing just the outer CV joint is an effective fix that restores steering precision and eliminates cornering noises.

Find the right part for your Mitsubishi Lancer Viii Sportback

Select the relevant subcategory for your Mitsubishi Lancer Viii Sportback:

With several possible drivetrain issues on any vehicle, it is best to start in the correct category straight away. Reviewing specific component categories for your Mitsubishi Lancer Viii Sportback makes it simple to distinguish between drive shaft, CV joint or propeller shaft issues, leading you to the parts that match your symptoms and exact vehicle fitment.

By following these links, you can view all available parts and compare technical specifications to ensure complete confidence in your purchase.

Why shop with CVJoint24?

As Swedish driveline specialists, we combine in-depth technical expertise with a high-quality product range dispatched across the EU from our central warehouse. We know that accurate fitment is essential for any successful repair, which is why we take meticulous care to ensure our vehicle data for the Mitsubishi Lancer Viii Sportback is precise. When you order from us, you receive high-grade spare parts selected by driveline professionals who understand European driving conditions. Thanks to our dedicated focus on drivetrains, we deliver specialist advice and tailored car parts that general motor factors often struggle to match—making us the ideal choice for DIY mechanics and professional workshops alike.

Frequently Asked Questions about Drivetrain for Mitsubishi Lancer Viii Sportback

How do I know whether I need to replace the entire drive shaft or just the CV joint?

If you hear clicking noises when cornering, it is usually the outer CV joint. If you experience vibrations during acceleration, it is often caused by the inner joint or an imbalance in the shaft, making replacing the complete drive shaft the safest solution.

Do all drive shafts fit every Mitsubishi Lancer Viii Sportback?

No, specifications vary depending on engine size and whether the vehicle has a manual or automatic gearbox. Always select your car's exact make, model and engine to find the right part.

What is included when I buy an outer CV joint for my Lancer Viii Sportback?

Our CV joint kits are supplied complete with the joint itself, a model-specific CV boot, high-quality grease, circlips and mounting clamps.

Are your drive shafts for Mitsubishi Lancer Viii Sportback brand new or remanufactured?

We supply brand new, factory-fresh drive shafts of high quality, which means you do not need to return your old core unit and you get a component built for maximum service life.

How quickly can I have the parts delivered?

As a Swedish driveline specialist, we aim for fast delivery dispatched directly from our central warehouse, so your Mitsubishi Lancer Viii Sportback can get back on the road as soon as possible.

Can a split CV boot really destroy the entire CV joint?

Yes, absolutely. When the boot splits, grease escapes and road dirt enters. Deprived of lubrication and exposed to abrasive particles, the metal components wear out in very little time.