Nissan Almera

Spare parts and drivetrain components for Nissan Almera.

Products for Nissan Almera

36 products
1 - 24 of 36
Item no.:0562562
  • Position: Outer
  • ABS teeth: 42
  • Seal diameter: 55 mm
  • Inner splines: 23
  • Outer splines: 25
Item no.:133707
  • Position: Front
  • ABS teeth: 42
  • Inner diameter: 68 mm
  • Outer diameter: 78 mm
  • Width: 10 mm
Item no.:0365059
  • ABS teeth: 42
  • Inner diameter: 68 mm
  • Outer diameter: 78 mm
  • Width: 10 mm
Item no.:0306154
  • ABS teeth: 44
  • Inner diameter: 68 mm
  • Outer diameter: 78 mm
  • Width: 9,5 mm
Item no.:342207
  • Position: Inner
  • Seal diameter: 40 mm
  • Inner splines: 23
  • Diameter: 40 mm
  • Splines gearbox side: 24
Item no.:0686006
  • Position: Front
  • Diameter: 86 mm
  • Outer diameter: 23 mm
Item no.:246042
  • Position: Front right, Inner
  • Seal diameter: 40 mm
  • Inner splines: 23
  • Diameter: 40 mm
  • Splines gearbox side: 25
Item no.:0518460
  • Position: Outer
  • ABS teeth: 42
  • Seal diameter: 55 mm
  • Inner splines: 35
  • Outer splines: 27
Item no.:337271
  • ABS teeth: 44
  • Inner diameter: 68 mm
  • Outer diameter: 78 mm
  • Width: 9,5 mm
Item no.:0573688
  • Position: Outer
  • ABS teeth: 44
  • Seal diameter: 55 mm
  • Inner splines: 23
  • Outer splines: 25
Item no.:0597889
  • Position: Outer
  • ABS teeth: 42
  • Seal diameter: 55 mm
  • Inner splines: 23
  • Outer splines: 25
Item no.:1136113
  • Position: Front left
  • Total length: 623 mm
  • Splines gearbox side: 25
  • Splines wheel side: 25
  • ABS teeth: 42
Item no.:2181243
  • Position: Front right
  • Total length: 927 mm
  • Splines gearbox side: 25
  • Splines wheel side: 25
  • ABS teeth: 42
Item no.:0527878
  • Position: Outer
  • ABS teeth: 42
  • Seal diameter: 55 mm
  • Inner splines: 22
  • Outer splines: 25
Item no.:145652
  • Position: Front, Inner
  • Inner splines: 22
  • Splines gearbox side: 24
Item no.:0599599
  • Position: Outer
  • Seal diameter: 55 mm
  • Inner splines: 22
  • Outer splines: 25
  • Joint diameter: 82 mm
Item no.:1180058
  • Position: Front left
  • Total length: 908 mm
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • ABS teeth: 44
Item no.:349527
  • Position: Front, Inner
  • Seal diameter: 40 mm
  • Inner splines: 21
  • Diameter: 40 mm
  • Splines gearbox side: 24
Item no.:0373121
  • ABS teeth: 44
  • Inner diameter: 77 mm
  • Outer diameter: 87 mm
  • Width: 9,5 mm
Item no.:252047
  • Position: Front, Outer
  • Total length: 595 mm
  • Outer diameter: 90 mm
  • Splines gearbox side: 27
  • ABS teeth: 42
Item no.:0128170
  • Total length: 910 mm
  • Splines gearbox side: 24
  • Splines wheel side: 25
Item no.:3563051
  • Position: Front, Outer
  • Inner splines: 35
  • Outer diameter: 90 mm
  • Splines wheel side: 27
  • ABS teeth: 42
Item no.:3564207
  • Position: Front, Outer
  • Inner splines: 23
  • Outer diameter: 82 mm
  • Splines wheel side: 25
  • ABS teeth: 42
Item no.:114033
  • Total length: 627 mm
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • ABS teeth: 42
Showing 1–24 of 36 products

Drivetrain for Nissan Almera

Maintaining the drivetrain on a Nissan Almera is essential for your car's longevity and driving safety. As a reliable workhorse in the compact class, the Almera requires components built to withstand everyday driving in varied European conditions. At CVJoint24, we offer an expertly selected range of drivetrain parts tailored specifically to this model. With 44 unique products in stock, we cover all common power transmission needs, from the wheel hub through to the gearbox. Choosing the right parts ensures that engine power reaches the wheels without unnecessary friction or vibration, saving fuel and preventing premature wear on surrounding mechanical assemblies.

How the Nissan Almera drivetrain works

The Nissan Almera is fundamentally a front-wheel-drive car with a drivetrain made up of several interacting components. Power from the engine travels through the gearbox to the drive shafts, which in turn drive the front wheels. Each drive shaft features two joints: an inner joint at the gearbox and an outer CV joint at the wheel. The outer constant velocity joint is particularly vital, as it allows the wheel to steer and absorb suspension travel while transferring drive. Many models are also fitted with ABS rings mounted on the CV joint to supply the braking system with crucial wheel-speed data. Understanding this layout is key to pinpointing faults and choosing the right replacement part to restore your car's original performance.

Common faults and symptoms

There are clear warning signs when the drivetrain on your Nissan Almera starts to fail. One of the most frequent symptoms is a clicking or knocking sound when taking tight turns, which typically indicates a worn outer CV joint on your Nissan Almera. If you instead notice vibrations through the steering wheel or bodywork during acceleration, this often points to an unbalanced drive shaft or a worn inner joint. Another widespread issue is the ABS warning light illuminating, often caused by a cracked or corroded Nissan Almera ABS ring. Spotting these early warning signs helps you avoid more extensive repairs and keeps your vehicle completely roadworthy.

Common parts to replace on Nissan Almera

Based on our experience, three main product categories are most in demand for the Nissan Almera. The outer CV joint is the most exposed component due to continuous movement and constant road grit and moisture. We stock 26 different outer CV joint variants to cater to all model options. Next are ABS rings, with 12 different options available, as these frequently suffer from corrosion during salted European winters. Finally, complete drive shafts offer an efficient solution for major overhauls, with 6 specific driveshafts available for the Almera. Replacing a complete Nissan Almera drive shaft is often far more time-effective than rebuilding individual joints if wear is widespread.

Finding the right part for your Nissan Almera

Explore the relevant subcategory for your Nissan Almera:

On a vehicle with several potential driveline issues, it pays to start in the correct section immediately. By comparing the exact component categories for your Nissan Almera, you can easily distinguish between problems in the drive shaft, CV joint or propeller shaft, taking you straight to the products that match your symptoms and exact vehicle specifications.

Selecting your car's exact make, model and engine minimises the risk of ordering the wrong part and guarantees a hassle-free repair that extends your vehicle's service life.

Why shop with CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist, dispatching across the EU directly from our warehouse in Helsingborg, Sweden. Unlike general car parts retailers, we focus on deep niche expertise and guaranteed fitment. When buying parts for your Nissan Almera from us, you benefit from a broad selection and exact technical precision. We understand how important it is to receive the correct part straight away, which is why our catalogue is carefully structured around precise vehicle specifications. Backed by specialist driveline knowledge and a strict commitment to quality, you can rely on our car parts to meet the highest standards. We are your dedicated partner for keeping your car running smoothly at competitive prices.

Frequently Asked Questions about Drivetrain Parts for Nissan Almera

How do I know if my Nissan Almera needs a new CV joint?

The most common sign is a clicking or knocking noise when making sharp turns under acceleration. This typically indicates that the outer CV joint is worn out.

Can I replace just the ABS ring on my Nissan Almera?

Yes, if the CV joint itself is in good condition but the ABS ring has cracked or corroded, you can often replace just the ring to save money.

Why does my Nissan Almera vibrate under acceleration?

Vibrations during acceleration are often caused by wear in the inner CV joint or an imbalance in the drive shaft itself. It is important to inspect this promptly to prevent damage to the gearbox.

Do all drive shafts fit every Nissan Almera model?

No, drive shafts vary depending on the engine size, gearbox type, and model year. Always select your vehicle's make, model, and engine variant to find the exact matching part.

What happens if a CV boot splits?

If the CV boot tears or splits, the lubricating grease leaks out while dirt and water enter. This causes the CV joint to wear out very quickly, resulting in the need for a full replacement.

How many drivetrain products do you offer for the Nissan Almera?

We currently stock 44 specific parts for the Nissan Almera, including drive shafts, outer CV joints, and ABS rings.