Nissan NP300 Navara

Spare parts and drivetrain components for Nissan NP300 Navara.

Products for Nissan NP300 Navara

43 products
1 - 24 of 43
Item no.:0520082
  • Position: Outer
  • Inner splines: 27
  • Seal diameter: 67 mm
  • Outer splines: 29
  • Thread size: M24x1,5
Item no.:0237976
  • Position: Front
  • Total length: 787 mm
  • Number of joints: 2
  • Outer diameter 1: 50 mm
  • Bolt circle diameter 1: 81,3 mm
Item no.:0262910
  • Total length: 1,521 mm
  • Number of joints: 2
  • Outer diameter 1: 45 mm
  • Outer diameter 2: 65 mm
  • Bolt circle diameter 2: 108 mm
Item no.:147047
  • Position: Inner
  • Inner splines: 26
  • Seal diameter: 45,5 mm
  • Outer splines: 39
Item no.:620462
  • Total length: 82 mm
  • Diameter: 27 mm
Item no.:0821119
  • Inner diameter: 45 mm
Item no.:356923
  • Position: Front, Outer
  • Inner splines: 36
  • Seal diameter: 67,2 mm
  • Outer splines: 29
  • Total length: 175 mm
Item no.:3130783
  • Position: Front
  • Splines gearbox side: 27
  • Splines wheel side: 29
  • Total length: 634 mm
  • Joint diameter: 100 mm
Item no.:6214734
  • Position: Rear
  • Total length: 1,915 mm
  • Number of joints: 3
  • Outer diameter 1: 65 mm
  • Bolt circle diameter 1: 108 mm
Item no.:621902
  • Total length: 92 mm
  • Diameter: 27 mm
Item no.:6292976
  • Position: Rear
  • Total length: 1,522 mm
  • Number of joints: 2
Item no.:0502695
  • Position: Outer
  • Inner splines: 26
  • Seal diameter: 67,2 mm
  • Outer splines: 29
  • Thread size: M24X1,5
Item no.:147616
  • Position: Inner
  • Inner splines: 26
  • Seal diameter: 39 mm
  • Total length: 195 mm
  • Joint diameter: 86 mm
Item no.:0946678
  • Inner diameter: 43 mm
  • Outer diameter: 70 mm
Item no.:0923768
  • Inner diameter: 38 mm
  • Outer diameter: 82 mm
Item no.:691905
  • Position: Rear
Item no.:0981974
  • Inner diameter: 40 mm
  • Outer diameter: 72 mm
Item no.:148980
  • Position: Front left, Inner
  • Inner splines: 35
  • Splines gearbox side: 27
  • Seal diameter: 39 mm
  • Outer diameter: 85 mm
Item no.:0994510
  • Inner diameter: 38 mm
  • Outer diameter: 75 mm
Item no.:0932081
  • Inner diameter: 38 mm
  • Outer diameter: 60 mm
Item no.:0984057
  • Inner diameter: 48 mm
  • Outer diameter: 80 mm
Showing 1–24 of 43 products

Drivetrain for Nissan NP300 Navara

The Nissan NP300 Navara is renowned for its strength and ability to handle tough conditions, but maintaining this capability requires a drivetrain in prime condition. The drivetrain is the core of your vehicle's power transmission, transferring engine torque out to the wheels. On a four-wheel-drive pickup like the Navara, these components are subjected to significant stress, especially when carrying heavy loads or driving off-road. We provide a carefully selected range of spare parts specifically engineered for the NP300 platform, ensuring you receive parts built to endure daily demands. By choosing the right components, you not only extend your vehicle's working life, but also ensure a secure, vibration-free drive.

How the Nissan NP300 Navara drivetrain is configured

The drivetrain layout on a Nissan NP300 Navara is robust and complex, engineered to handle both rear-wheel drive and part-time four-wheel drive. The system transfers power through several vital stages: torque flows from the gearbox through a transfer case to both the front and rear axles. Rear-wheel drive is delivered via a long, often two-piece propeller shaft leading to a solid rear axle. At the front, independent drive shafts with joints accommodate both suspension travel and steering angles. This layout requires every link in the chain—from the prop shaft centre bearing to the outer CV joints—to work in harmony. Because the Navara is frequently used for heavy towing and hauling, exact component tolerances are crucial to prevent premature wear on the differentials and gearbox.

Common faults and symptoms

There are several clear signs that components in your vehicle's transmission system are beginning to fail. One of the most typical symptoms of a worn outer CV joint on a Nissan NP300 Navara is a rhythmic clicking noise heard distinctly on full steering lock during acceleration. If you notice vibrations that intensify with vehicle speed, or a humming noise beneath the floor, this can indicate wear or imbalance in the propeller shaft or its centre bearing. It is equally important to inspect the CV boots for grease leaks; a split boot allows grit to enter, which ruins the joint in short order. Vibrations under acceleration can also point to play in the inner constant velocity joints, which often calls for a complete driveshaft replacement to restore balance.

Common replacement parts for Nissan NP300 Navara

Depending on your driving style and operating conditions, certain components on your Navara undergo higher wear than others. We have organised our most requested components to help you identify the right solution for your repair. Here are the most common categories for this model:

  • Drive shaft for Nissan NP300 Navara – Complete shafts for a swift, straightforward replacement.
  • Propeller shaft for Nissan NP300 Navara – Replacement prop shafts that eliminate driveline vibration.
  • Outer CV joint for Nissan NP300 Navara – Precision components to cure clicking noises when turning.

Focusing on these key areas allows you to maintain dependable performance and avoid costly consequential damage to the wider transmission.

Finding the right part for your Nissan NP300 Navara

Navigate directly to the relevant component section for your Nissan NP300 Navara:

With several possible drivetrain issues on this platform, starting in the right category saves time. By comparing the exact sections for the Nissan NP300 Navara, you can quickly distinguish between drive shaft, CV joint or propeller shaft faults and proceed to the page matching your symptoms and specifications.

Identifying the exact spare part for a Nissan NP300 Navara can sometimes be tricky, as dimensions and designs vary by engine variant, gearbox and production year. The most reliable way to ensure a correct fit is to filter by your vehicle's make, model and engine version on our site. It is also good practice to check physical measurements or count the spline teeth on your original component if you are uncertain, particularly when replacing CV joints. Our customer service team and technical documentation are readily available to guide you, giving you full confidence that your replacement part will fit smoothly during installation.

Why shop with CVJoint24

As a Swedish driveline specialist, we offer deep technical knowledge and a tailored product range that general motor factors rarely match. By focusing dedicatedly on drivetrain components, we understand the specific engineering challenges of the Nissan NP300 Navara inside and out. Our range focuses on high-quality car parts with precise fitment, helping you minimise workshop downtime and prevent repeat repairs. With our specialist support backing every order, you get dependable parts and expert advice shipped directly to your door across Europe.

Frequently Asked Questions about Drivetrain Parts for Nissan NP300 Navara – Precision Fit Spare Parts

How do I know if the outer CV joint is faulty on my Navara?

The most common sign is a clicking or knocking noise that occurs when turning sharply, such as during parking, while applying throttle. If the noise disappears when driving in a straight line, it is almost certainly the outer CV joint.

Why does my Nissan NP300 Navara vibrate at higher speeds?

Vibrations at higher speeds are often caused by imbalance or wear in the propeller shaft or its centre bearing. Because the Navara has a long drivetrain, the prop shaft is particularly vulnerable to damage or worn universal joints.

Can I replace just the CV joint, or do I need to replace the complete drive shaft?

On the Nissan NP300 Navara, you can often replace just the outer CV joint if the shaft is otherwise undamaged. However, if the inner joint is also worn or the shaft has taken an impact, replacing the complete drive shaft is usually more economical and reliable.

Do all propeller shafts fit all NP300 Navara models?

No, propeller shafts vary depending on the wheelbase (King Cab vs Double Cab), gearbox type, and whether the vehicle is rear-wheel drive or four-wheel drive. Always select your vehicle make, model and engine variant to ensure the correct length and specification.

What happens if I drive with a split CV boot?

If the CV boot is split, grease leaks out and dirt and water get in. This causes the CV joint to wear out very quickly, which can result in total failure and a complete loss of drive.

How many drive shafts does a Nissan NP300 Navara have?

A four-wheel-drive Navara has two front drive shafts (one on each side) and a propeller shaft delivering power to the rear wheels via a rigid rear axle. The rear wheels are driven by half-shafts housed inside the rear axle casing.